Check this out c10 addicts (MMW)

[blazins10]

I have 3 sets of his arms ( 2-s10s, 63 c10 with dodger arms) and they are badass , ride great and are align able which is great for an aftermarket arms
Posted via Mobile Device

[Jeebus]

Thanks guys, glad you like some of what we build. As i would love to advertise on all sorts of forums, we just have too broad of a product line to single any out, and to pay to advertise on every individual forum just plain and simply costs to much.

Wish i could post more of what we make on here, but this is a paid advertise site only. Hopefully mike will post some pictures of his arms when they get over to him, as they are going to be very slick!

Thanks again!

Taylor

[lolife99]

Jeebus,... Thanks for checking in!
You have some killer fab skills!!!

[belowme51]

I seen some killer jeebus caps might look nice for my arms! Damn right I'll show everyone from here to the shows as I'm proud,Taylor you guys rock and for what you guys are putting together for me I can not thank you more. People are gonna freak when they see it

[naphtali5725]

I'm planning on going with Taylors' MMW arms as well. I emailed him to see if he makes lower arms for stock spring setups, they already make them for porterbuilt and air bags, but I'm static dropping with spindles and keeping springs... I sure hope he can fab something for me.

[belowme51]

Taylor can make pretty much anything you need just need to talk to him about what you are trying to accomplish.

thanks again for supporting a great company like MMW!!!

[Mad Rods]

Those are NICE!
Posted via Mobile Device

[ddubbs]

Originally Posted by belowme51

I seen some killer jeebus caps might look nice for my arms! Damn right I'll show everyone from here to the shows as I'm proud,Taylor you guys rock and for what you guys are putting together for me I can not thank you more. People are gonna freak when they see it

Wondering if you have any pics of your new arms yet.
Posted via Mobile Device

[belowme51]

all I have is a crappy cell pic of the upper, yet that is where all the detail on the arms. They are being painted but will post pics of them done. Taylor did a great job on these!!

[SCOTI]

My arms were nicely built. The powder coating was super thin.... I went through in several places just washing them down w/some Simple Green & a Scotchbrite pad to allow adhesion (my plan was to rattle can them to match my other under-hood items). The other thing I didn't care for was the sleeves for the bushings were too long vs the bushing.

That being said.... they don't clear the steering shaft w/my notched x-member in the dually. MMW wouldn't say they would work so I knew I was taking a chance w/o dimensional info (which I tried to speak w/them about). I just notched the current a-arm so I can move forward. These will sit on the shelf for something else....