Used Vortec heads for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*racedvl* · 11-21-2003, 05:19 PM

These are Vortec heads off a 1997 express conversion van. The van had appx. 70,xxx miles from what I was told. The engine was replaced due to lack of oil, that took out the bottom end. These heads are the 906 casting. I looked over the heads real quick and they seem to look pretty good. IE no cracks ect. . . I would tend to think all these need is a good cleaning and they would be ready to go. I am looking to get $325 + actual shipping. They will include the rocker arms.

Also, I have no way of weighing these. Does anyone know what a small block head weighs each? Thanks.

*racedvl* · 11-21-2003, 05:20 PM

2

*racedvl* · 11-21-2003, 05:21 PM

3

*racedvl* · 11-21-2003, 05:23 PM

Also, please reply in this thread. No pm's please.

Moloko · 11-21-2003, 06:39 PM

I just shipped some heads, they weighed about 55lbs each.

*racedvl* · 11-21-2003, 06:51 PM

Quote:

Originally posted by Moloko
I just shipped some heads, they weighed about 55lbs each.

Thanks.

lukecp · 11-21-2003, 07:32 PM

Just step on a bathroom scale holding the head, then step on it w/o the head and find the difference....that is how i always give shipping qoutes when selling stuff over the net

*racedvl* · 11-21-2003, 08:32 PM

I don't have a bathroom scale!!!

I don't wanna know what I weigh. . .

*rage'nrat638* · 11-21-2003, 10:04 PM

heck theres only 35 lbs. left with just me on the scale...

70c10 · 11-21-2003, 10:08 PM

I just recieved my cast iron heads in the mail recently and the package for each reads 53 lbs.

*racedvl* · 11-22-2003, 10:28 AM

TTT

jmanz69 · 11-22-2003, 10:46 AM

I am looking for some Vortecs, but don't have the cash right now. Even if I do end up selling the truck, I'm keeping the engine. I want to do a Vortec TPI Twin Turbo

Although, I did just have a week of meeting with customers that are very interested in buying equipment from me, so that could make it easier to find the money. The commission on one machine would pay for the heads and then some. I'll cross my fingers.

Destructo · 11-22-2003, 10:49 AM

Sounds like your selling some nice equipment there hehe.

nate68 · 11-23-2003, 01:45 AM

i shipped a set of vortec heads (assembled) , edelbrock intake manifold, head bolts, and rocker arms and it weighted about 125. heads are 50ish each.
Dart heads are hella heavier than Vortecs.

*racedvl* · 11-23-2003, 11:55 AM

Bump.

*racedvl* · 11-23-2003, 11:05 PM

Bump.

85gmcguy · 12-01-2003, 08:50 PM

Do you still have the heads? Just getting ready to send my block out, so I'm in the market... and could you estimate shipping to 32063

Thanks

*racedvl* · 12-01-2003, 09:51 PM

Yes I still have them. I will give ya a deal and have them to your door $350.

85gmcguy · 12-01-2003, 11:16 PM

Sounds like a deal to me. PM me with payment address and we'll get the ball rolling...

Thanks

Gary

*racedvl* · 12-01-2003, 11:50 PM

Deal !!!

85gmcguy · 12-02-2003, 09:14 AM

Sent you a PM.

Gary

*racedvl* · 12-02-2003, 10:27 AM

SOLD!

85gmcguy · 12-03-2003, 09:14 AM

sent you a PM

Gary

11-21-2003, 05:19 PM	#1
racedvl Account Suspended Join Date: Jan 2000 Location: Woodstock, IL Posts: 7,020	Used Vortec heads for sale These are Vortec heads off a 1997 express conversion van. The van had appx. 70,xxx miles from what I was told. The engine was replaced due to lack of oil, that took out the bottom end. These heads are the 906 casting. I looked over the heads real quick and they seem to look pretty good. IE no cracks ect. . . I would tend to think all these need is a good cleaning and they would be ready to go. I am looking to get $325 + actual shipping. They will include the rocker arms. Also, I have no way of weighing these. Does anyone know what a small block head weighs each? Thanks. Attached Images

11-21-2003, 05:20 PM	#2
racedvl Account Suspended Join Date: Jan 2000 Location: Woodstock, IL Posts: 7,020	2 Attached Images

11-21-2003, 05:21 PM	#3
racedvl Account Suspended Join Date: Jan 2000 Location: Woodstock, IL Posts: 7,020	3 Attached Images

11-21-2003, 06:39 PM	#5
Moloko Hoarding Rusty Objects Join Date: Aug 2002 Location: Slatington, PA Posts: 267	I just shipped some heads, they weighed about 55lbs each. __________________ 1985 Chevrolet K20 Silverado 1994 GMC Yukon Follow me on Youtube! - http://www.youtube.com/user/FuelInjectionSucks

11-21-2003, 07:32 PM	#7
lukecp Formerly yellow72custom Join Date: May 2001 Location: Austin, TX Posts: 7,531	Just step on a bathroom scale holding the head, then step on it w/o the head and find the difference....that is how i always give shipping qoutes when selling stuff over the net __________________ '72 Chevy C10 Mild 350/TH350/3.07. Ochre/White. Old high school ride. '70 GMC C2500 '62 327 4bbl/SM465/4.56-geared Dana 60. White/White. Project or parts truck. '97 Saturn SL DD. 1.9/5-speed. 40+ highway mpg

11-21-2003, 05:23 PM	#4
racedvl Account Suspended Join Date: Jan 2000 Location: Woodstock, IL Posts: 7,020	Also, please reply in this thread. No pm's please.

11-21-2003, 08:32 PM	#8
racedvl Account Suspended Join Date: Jan 2000 Location: Woodstock, IL Posts: 7,020	I don't have a bathroom scale!!! I don't wanna know what I weigh. . .

11-21-2003, 10:04 PM	#9
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	heck theres only 35 lbs. left with just me on the scale...

11-21-2003, 10:08 PM	#10
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	I just recieved my cast iron heads in the mail recently and the package for each reads 53 lbs. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

11-22-2003, 10:28 AM	#11
racedvl Account Suspended Join Date: Jan 2000 Location: Woodstock, IL Posts: 7,020	TTT

11-22-2003, 10:46 AM	#12
jmanz69 Careful, they attack... Join Date: Aug 2001 Location: Waterford, MI, USA Posts: 1,107	I am looking for some Vortecs, but don't have the cash right now. Even if I do end up selling the truck, I'm keeping the engine. I want to do a Vortec TPI Twin Turbo Although, I did just have a week of meeting with customers that are very interested in buying equipment from me, so that could make it easier to find the money. The commission on one machine would pay for the heads and then some. I'll cross my fingers.

11-22-2003, 10:49 AM	#13
Destructo Registered User Join Date: Sep 2003 Location: Lewisville, NC Posts: 1,836	Sounds like your selling some nice equipment there hehe.

11-23-2003, 01:45 AM	#14
nate68 Registered User Join Date: Jan 2000 Location: ca Posts: 1,110	i shipped a set of vortec heads (assembled) , edelbrock intake manifold, head bolts, and rocker arms and it weighted about 125. heads are 50ish each. Dart heads are hella heavier than Vortecs. __________________ 68 short step, 406/700r4, 9" w/discs.

11-23-2003, 11:55 AM	#15
racedvl Account Suspended Join Date: Jan 2000 Location: Woodstock, IL Posts: 7,020	Bump.

11-23-2003, 11:05 PM	#16
racedvl Account Suspended Join Date: Jan 2000 Location: Woodstock, IL Posts: 7,020	Bump.



Register or Log In To remove these advertisements.

12-01-2003, 08:50 PM	#17
85gmcguy Plays with trucks Join Date: Sep 2003 Location: Asheville, NC Posts: 433	Do you still have the heads? Just getting ready to send my block out, so I'm in the market... and could you estimate shipping to 32063 Thanks __________________ Gary My Dad's Old Truck 1985 Last edited by 85gmcguy; 12-01-2003 at 09:00 PM.

12-01-2003, 09:51 PM	#18
racedvl Account Suspended Join Date: Jan 2000 Location: Woodstock, IL Posts: 7,020	Yes I still have them. I will give ya a deal and have them to your door $350.

12-01-2003, 11:16 PM	#19
85gmcguy Plays with trucks Join Date: Sep 2003 Location: Asheville, NC Posts: 433	Sounds like a deal to me. PM me with payment address and we'll get the ball rolling... Thanks Gary __________________ Gary My Dad's Old Truck 1985

12-01-2003, 11:50 PM	#20
racedvl Account Suspended Join Date: Jan 2000 Location: Woodstock, IL Posts: 7,020	Deal !!!

12-02-2003, 09:14 AM	#21
85gmcguy Plays with trucks Join Date: Sep 2003 Location: Asheville, NC Posts: 433	Sent you a PM. Gary __________________ Gary My Dad's Old Truck 1985

12-02-2003, 10:27 AM	#22
racedvl Account Suspended Join Date: Jan 2000 Location: Woodstock, IL Posts: 7,020	SOLD!

12-03-2003, 09:14 AM	#23
85gmcguy Plays with trucks Join Date: Sep 2003 Location: Asheville, NC Posts: 433	sent you a PM Gary __________________ Gary My Dad's Old Truck 1985

Register or Log In To remove these advertisements.