Is anyone making a billet hinge for 60-66 trucks ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lenguini · 06-19-2013, 12:19 AM

Is anyone making a billet hinge for 60-66 trucks ? I have talked with Ring Brothers,but no luck.I see them for 67 through 72 but........

Someone must make them ?

62-One-Ton · 06-19-2013, 01:36 AM

Porterbuilt all the way. I know they're not billet but they are freakin sweet.
Posted via Mobile Device

**MisterC** · 06-19-2013, 11:27 AM

Quote:

Originally Posted by 62-One-Ton

Porterbuilt all the way. I know they're not billet but they are freakin sweet.
Posted via Mobile Device

If only they'd kick out the gas assisted version for our models

**rideblue00** · 06-19-2013, 11:46 AM

those are sweet!

Modges'66 · 03-01-2015, 07:08 PM

I was looking myself and just spotted this!
Eddie Motorsports...

http://www.autopressreleases.com/vie...se.php?id=1856

Modges'66 · 03-01-2015, 07:16 PM

It seems that Classic Parts also has them now.

http://www.classicparts.com/1960-66-.../#.VPOdpkK4k0o

LDO · 03-01-2015, 07:24 PM

I've only seen them for the 55-57 trucks and I will tell you that they don't open the hood all the way when compared to the stock hinge.

NevEno · 03-01-2015, 07:28 PM

Classic parts of America has 1960-66 Billet Hood Hinges for 674.95 a set.

http://www.classicparts.com/Fender-H...oducts/236/6/0

**MisterC** · 03-01-2015, 07:30 PM

Laidbackrecreations carries them and they're board vendors with a great reputation for service and great pricing

http://67-72chevytrucks.com/vboard/s...d.php?t=642901

AustinBelair · 03-02-2015, 01:33 AM

Quote:

Originally Posted by Modges'66

It seems that Classic Parts also has them now.

http://www.classicparts.com/1960-66-.../#.VPOdpkK4k0o

Those are pretty but good grief, I'd never pay that much for hood hinges.

**joedoh** · 03-02-2015, 01:39 AM

they are direct replacement? thats a lotta ducks for hinges that still hit the tire on a lowered truck if so. on the other hand, they are stunning!

watkins boyz · 04-07-2015, 06:08 PM

has anyone used these?

lenguini · 04-08-2015, 01:49 AM

Will be buying a set in the future,nice looking hinge...about time!

watkins boyz · 04-08-2015, 09:57 PM

Quote:

Originally Posted by lenguini

Will be buying a set in the future,nice looking hinge...about time!

well let me know cuz the eddie motorsports ones I got will not let the hood close in the back I have the weakest shocks they make and still nothing . no shocks it will open and close fine but not with shocks. plus there customer service sucks the owner was a complete ass basically told me tough **** . 800 bucks and out of luck

lenguini · 04-09-2015, 02:56 AM

Quote:

Originally Posted by watkins boyz

well let me know cuz the eddie motorsports ones I got will not let the hood close in the back I have the weakest shocks they make and still nothing . no shocks it will open and close fine but not with shocks. plus there customer service sucks the owner was a complete ass basically told me tough **** . 800 bucks and out of luck

Sorry to hear the bad news,they sound like a bunch of a holes...time for the better business bureau.Maybe your credit card company can help?

Im gonna rethink think buying any,probably another piece of crap made in china !

blazins10 · 04-12-2015, 11:25 AM

Quote:

Originally Posted by MisterC

If only they'd kick out the gas assisted version for our models

Ph now offers gas assist for 60-66, I have them , they're great

http://pbfab.com/shop/60-66-cowl-mou...s-gas-assisted

06-19-2013, 12:19 AM	#1
lenguini Registered User Join Date: Oct 2010 Location: Kelowna B.C. Posts: 743	Is anyone making a billet hinge for 60-66 trucks ? Is anyone making a billet hinge for 60-66 trucks ? I have talked with Ring Brothers,but no luck.I see them for 67 through 72 but........ Someone must make them ? Attached Images __________________ Always a place in my heart for old Chevy trucks: My build thread-project truck dream 65" http://67-72chevytrucks.com/vboard/s...d.php?t=510863

06-19-2013, 01:36 AM	#2
62-One-Ton Registered User Join Date: Feb 2012 Location: Rescue, CA Posts: 255	Re: Is anyone making a billet hinge for 60-66 trucks ? Porterbuilt all the way. I know they're not billet but they are freakin sweet. Posted via Mobile Device __________________ Project Change of Plans: http://67-72chevytrucks.com/vboard/s...d.php?t=513135 '62 C10 SWB '03 Express Van 5.3l Dead (parting out and using motor) '99 Silverado 4.8l 5 speed 4wd

06-19-2013, 11:46 AM	#4
rideblue00 Senior Member Join Date: Feb 2010 Location: Lambertville, MI Posts: 1,860	Re: Is anyone making a billet hinge for 60-66 trucks ? those are sweet!

03-01-2015, 07:08 PM	#5
Modges'66 Registered User Join Date: Feb 2012 Location: Grand Rapids, Michigan, otherwise known as Beer City U.S.A. Posts: 1,081	Re: Is anyone making a billet hinge for 60-66 trucks ? I was looking myself and just spotted this! Eddie Motorsports... http://www.autopressreleases.com/vie...se.php?id=1856 __________________ My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=512904

03-01-2015, 07:16 PM	#6
Modges'66 Registered User Join Date: Feb 2012 Location: Grand Rapids, Michigan, otherwise known as Beer City U.S.A. Posts: 1,081	Re: Is anyone making a billet hinge for 60-66 trucks ? It seems that Classic Parts also has them now. http://www.classicparts.com/1960-66-.../#.VPOdpkK4k0o __________________ My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=512904

03-01-2015, 07:24 PM	#7
LDO Registered User Join Date: Feb 2011 Location: Senatobia, MS Posts: 1,294	Re: Is anyone making a billet hinge for 60-66 trucks ? I've only seen them for the 55-57 trucks and I will tell you that they don't open the hood all the way when compared to the stock hinge. __________________ Once a Marine, always a Marine! My (Her) 57 Build "Beverly" My 66 Build "Betty" My 85 C10 "Old Blue" Help Me Find "Old Blue" OLD BLUE PART II

03-01-2015, 07:28 PM	#8
NevEno Registered User Join Date: Aug 2014 Location: oklahoma Posts: 357	Re: Is anyone making a billet hinge for 60-66 trucks ? Classic parts of America has 1960-66 Billet Hood Hinges for 674.95 a set. http://www.classicparts.com/Fender-H...oducts/236/6/0 __________________ You can find me on Instagram @neveno_cten

03-01-2015, 07:30 PM	#9
MisterC Senior Member Join Date: Sep 2011 Location: Hanford, CA Posts: 1,027	Re: Is anyone making a billet hinge for 60-66 trucks ? Laidbackrecreations carries them and they're board vendors with a great reputation for service and great pricing http://67-72chevytrucks.com/vboard/s...d.php?t=642901 __________________ Poor and content is Rich...and Rich enough! - William Shakespeare 1966 C10 Custom Cab "Luigi" Big Window - SWB Fleetside 350 V-8 - Powerglide My not so much a build thread as a "Slow Progression Thread":http://67-72chevytrucks.com/vboard/s...d.php?t=486894

03-02-2015, 01:39 AM	#11
joedoh Senior Member Join Date: May 2007 Location: Doodah Kansas Posts: 7,773	Re: Is anyone making a billet hinge for 60-66 trucks ? they are direct replacement? thats a lotta ducks for hinges that still hit the tire on a lowered truck if so. on the other hand, they are stunning! __________________ the mass of men live lives of quiet desperation if there is a problem, I can have it. new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393

04-07-2015, 06:08 PM	#12
watkins boyz Registered User Join Date: Oct 2012 Location: kalkaska mi Posts: 54	Re: Is anyone making a billet hinge for 60-66 trucks ? has anyone used these?

04-08-2015, 01:49 AM	#13
lenguini Registered User Join Date: Oct 2010 Location: Kelowna B.C. Posts: 743	Re: Is anyone making a billet hinge for 60-66 trucks ? Will be buying a set in the future,nice looking hinge...about time! Attached Images __________________ Always a place in my heart for old Chevy trucks: My build thread-project truck dream 65" http://67-72chevytrucks.com/vboard/s...d.php?t=510863



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.