How to mount a divorced t-case - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Scrub · 11-30-2003, 02:29 PM

I posted this in the 4x4 forum, but you guys seem to answer more often. This is for my 72 k20 project.

I have a Dodge, divorced 205 that I am getting ready to build mounts for. It seems to have only 4 bolt holes. Anyone have any pics of a divorced case mounting?

I could use some suggestions on rubber and hardware.

Why a Dodge case? It has 32 spline yokes on all 3 shafts. I am using a 1250 joint on the input and 1410 joints on the outputs. This allows me to upgrade to a different trany someday as I really want to go to a 5 speed.

Thanks in advance.

11-30-2003, 02:29 PM	#1
Scrub Collector of rusty Items Join Date: Dec 2001 Location: Sisters,Oregon USA Posts: 731	How to mount a divorced t-case I posted this in the 4x4 forum, but you guys seem to answer more often. This is for my 72 k20 project. I have a Dodge, divorced 205 that I am getting ready to build mounts for. It seems to have only 4 bolt holes. Anyone have any pics of a divorced case mounting? I could use some suggestions on rubber and hardware. Why a Dodge case? It has 32 spline yokes on all 3 shafts. I am using a 1250 joint on the input and 1410 joints on the outputs. This allows me to upgrade to a different trany someday as I really want to go to a 5 speed. Thanks in advance. __________________ Scrub Sisters, Oregon - Home of the Sisters Rodeo. 70 GMC 1,000,000 + miles 72 K-20 project, 456 Dana60 front, Corp14 rear w/locker, 265R19.5 tires 20-ply. Warn 12k winches both ends, Cross-over steering with raised tie-rod, Powerbox steering, 4500 watt 120-AC power, Air, Hydraulic aux power, 4 inch lift, 5000 lb air-bags both ends.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.