72 1/2t suburban frame f/s - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**JQ-72** · 11-30-2003, 11:38 PM

I am parting out a 1/2 ton 2 wd 72 suburban. The body is trash, but the frame is real solid. It has 3.08 coil rear (non posi) and fr. disc and fr. stabilizer bar. Is there any market a solid frame, or should I send it to the scrap yard with the rest of the body?

Joshua

crazy4chevs · 12-01-2003, 12:40 AM

check the suburban board somone had a bent frame they might want it.

**burb71** · 12-03-2003, 12:26 PM

How much for your burb frame?
Is it Auto or 4 speed, Big Block or small?
Can you send good pics?
2936renshaw@comcast.net

**JQ-72** · 12-03-2003, 08:53 PM

It is a small V-8, auto. I will get some pictures later.

Joshua

krue · 12-03-2003, 10:01 PM

How much for the front crossmember and brake components? I need to go to discs on the front of mine.

cojnit · 12-03-2003, 10:51 PM

how trashed is the body?

I could use a nice section or the rear drivers side body panel!

from the bottom of the body to about a foot from under the glass. Also from the back of the rear wheel to the bumper.

This is the section:

**JQ-72** · 12-09-2003, 01:47 AM

Well, here are some pictures. Beware, it's ugly. The guy parked it in a field about 12 years ago and stored dog food and junk in it. The mice took over and totally trashed the interior. There was about 4 inches of chewed up seat, paper, carpet, and rat turds on the floor that held moisture and rotted the floor and door bottoms. $300 for rolling frame with auto crossmember, ps box, fr and rear bumper brackets. $100 for bare frame.
Krue, I have a few disc brake front crossmembers. $125 complete.

**JQ-72** · 12-09-2003, 01:48 AM

2

**JQ-72** · 12-09-2003, 01:49 AM

3

cojnit · 12-09-2003, 02:19 PM

thanks anyway!

sub4rvr · 12-13-2003, 03:41 PM

Do you have the drive shaft to sell ?

dinnut · 12-14-2003, 03:29 AM

thats really sad

jcueckert13 · 12-14-2003, 11:03 AM

actualy the suburban frame will work on a lwb truck. i have a 4x4 suburban frame that i will be building a lwb truck on

KEROLPH · 12-14-2003, 12:04 PM

Do you still have the locking mechanism for the tailgate? If so, I'd like to buy the tailgate guts. Keith

howlin50 · 12-14-2003, 10:23 PM

I missed on this one but if one of you Burb people know where I can get latches for the barn type doors for a '72 Burb, PPPLLLLEase let me know -Thanks

**JQ-72** · 12-15-2003, 12:11 AM

No good tailgate latch. It was locked up. I took everything off this truck that was salvagable (which was'nt much). Then I cut off all the body bolts, hauled it to the scrap yard, and let them pull the body off the frame. I still have the frame for sale with gas tank, fr. and rear bumper brackets, ps box, auto crossmember, front stabilizer (see post on Suburban board)

Joshua

krue · 12-15-2003, 05:54 AM

Where in Al. are you? I am interested in a disc xmember, but I gotta get the wife's car a tranny first. Don't know where I can find a tranny for a 93 Intrepid cheap do you?

**burb71** · 12-15-2003, 06:18 PM

Can you please send me some good pics of the frame now that the body is of it?

2936renshaw@comcast.net

**JQ-72** · 12-18-2003, 10:01 AM

Here is a picture of the frame. There are some more detailed pictures on the Suburban board.

11-30-2003, 11:38 PM	#1
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,572	72 1/2t suburban frame f/s I am parting out a 1/2 ton 2 wd 72 suburban. The body is trash, but the frame is real solid. It has 3.08 coil rear (non posi) and fr. disc and fr. stabilizer bar. Is there any market a solid frame, or should I send it to the scrap yard with the rest of the body? Joshua

12-01-2003, 12:40 AM	#2
crazy4chevs Registered User Join Date: Oct 2002 Location: Des Moines WA. (Kent, area) Posts: 668	check the suburban board somone had a bent frame they might want it. __________________ 70 chev c10 swb fleet 72 grill, sb 400, 2/4 drop. 68 chev c10 swb fleet Early classic 4/6 drop with 4wheel disc brakes 9"rear 67-8 buckets tilt and A/C Classic GM Truck Club of Washington .

12-03-2003, 12:26 PM	#3
burb71 Active Member Join Date: Oct 2002 Location: Ft. Myers, Fl Posts: 1,716	burb frame How much for your burb frame? Is it Auto or 4 speed, Big Block or small? Can you send good pics? 2936renshaw@comcast.net

12-03-2003, 10:01 PM	#5
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	How much for the front crossmember and brake components? I need to go to discs on the front of mine. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

12-03-2003, 10:51 PM	#6
cojnit Nothing clever Join Date: Jun 2003 Location: Kailua HI Posts: 828	how trashed is the body? I could use a nice section or the rear drivers side body panel! from the bottom of the body to about a foot from under the glass. Also from the back of the rear wheel to the bumper. This is the section: Attached Images __________________ Got "the Midas Touch!"

12-03-2003, 08:53 PM	#4
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,572	It is a small V-8, auto. I will get some pictures later. Joshua

12-09-2003, 01:47 AM	#7
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,572	Well, here are some pictures. Beware, it's ugly. The guy parked it in a field about 12 years ago and stored dog food and junk in it. The mice took over and totally trashed the interior. There was about 4 inches of chewed up seat, paper, carpet, and rat turds on the floor that held moisture and rotted the floor and door bottoms. $300 for rolling frame with auto crossmember, ps box, fr and rear bumper brackets. $100 for bare frame. Krue, I have a few disc brake front crossmembers. $125 complete. Attached Images

12-09-2003, 01:48 AM	#8
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,572	2 Attached Images

12-09-2003, 01:49 AM	#9
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,572	3 Attached Images

12-09-2003, 02:19 PM	#10
cojnit Nothing clever Join Date: Jun 2003 Location: Kailua HI Posts: 828	thanks anyway! __________________ Got "the Midas Touch!"

12-13-2003, 03:41 PM	#11
sub4rvr Registered User Join Date: May 2000 Location: Palm Springs, Ca. Posts: 574	Do you have the drive shaft to sell ? __________________ 72 C10 Suburban 90 S10 57 F100 (2) 67 Mustang (2) 69 Torino GT 00 Mustang GT Conv.

12-14-2003, 03:29 AM	#12
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	thats really sad __________________ 70 longbed 496/th400/Ford 9"

12-14-2003, 11:03 AM	#13
jcueckert13 Registered User Join Date: Apr 2003 Location: Edgewood New Mexico Posts: 2,088	actualy the suburban frame will work on a lwb truck. i have a 4x4 suburban frame that i will be building a lwb truck on __________________ 1990 subaru legcy (daily driver) 1987 Toyota 4runner (weekend toy) 1968 C30 flatbed dually 1970 C10 longbed stepside (in pieces) 1976 Dodge Dart 1963 Dodge Dart

12-14-2003, 12:04 PM	#14
KEROLPH Registered User Join Date: Dec 2003 Location: Wilmington, DE Posts: 6	Do you still have the locking mechanism for the tailgate? If so, I'd like to buy the tailgate guts. Keith

12-14-2003, 10:23 PM	#15
howlin50 Registered User Join Date: May 2003 Location: southeastern Pottawatamie co, Oklahoma Posts: 48	missed back door latches again! I missed on this one but if one of you Burb people know where I can get latches for the barn type doors for a '72 Burb, PPPLLLLEase let me know -Thanks __________________ A man should Howl while he can because he may not always be able to be a Howlin man! Howlin 50



Register or Log In To remove these advertisements.

12-15-2003, 12:11 AM	#16
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,572	No good tailgate latch. It was locked up. I took everything off this truck that was salvagable (which was'nt much). Then I cut off all the body bolts, hauled it to the scrap yard, and let them pull the body off the frame. I still have the frame for sale with gas tank, fr. and rear bumper brackets, ps box, auto crossmember, front stabilizer (see post on Suburban board) Joshua

12-15-2003, 05:54 AM	#17
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Where in Al. are you? I am interested in a disc xmember, but I gotta get the wife's car a tranny first. Don't know where I can find a tranny for a 93 Intrepid cheap do you? __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

12-15-2003, 06:18 PM	#18
burb71 Active Member Join Date: Oct 2002 Location: Ft. Myers, Fl Posts: 1,716	burb frame Can you please send me some good pics of the frame now that the body is of it? 2936renshaw@comcast.net

12-18-2003, 10:01 AM	#19
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,572	Here is a picture of the frame. There are some more detailed pictures on the Suburban board. Attached Images

Register or Log In To remove these advertisements.