MN My little 67-72 parts yard- pickup only - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Truckseats · 08-23-2013, 01:21 PM

What condition is your tailgate in on your blue 1967? I have been looking for one. I understand you are not wanting to ship. Thanks

69Rumbler · 08-23-2013, 03:26 PM

Looking for an review mirror for and 69
Posted via Mobile Device

69Rumbler · 08-23-2013, 03:28 PM

Will also like to know of you have any dash bezels with knobs I need them to make a blue print so I don't have to pull my off again
Posted via Mobile Device

Dozers72 · 08-23-2013, 04:47 PM

Do you have and 2 wheel drives with 6 lug front drum?
Posted via Mobile Device

Vintage Windmills · 08-24-2013, 10:01 AM

Quote:

Originally Posted by Dozers72

Do you have and 2 wheel drives with 6 lug front drum?
Posted via Mobile Device

Yes, I have a 67 and a 70 sitting here

Quote:

Originally Posted by 69Rumbler

Will also like to know of you have any dash bezels with knobs I need them to make a blue print so I don't have to pull my off again
Posted via Mobile Device

Just the guage bezel and a headlight knob, wiper knob would be around $40 shipped. what year and with or without holes for all guages?

Quote:

Originally Posted by 69Rumbler

Looking for an review mirror for and 69
Posted via Mobile Device

Ok, $35 shipped with cover and screw.

Quote:

Originally Posted by Truckseats

What condition is your tailgate in on your blue 1967? I have been looking for one. I understand you are not wanting to ship. Thanks

Its actually very nice except for one small area rusted through on inside from dirt sitting. Rest is pretty amazing. I would ship but the value of the gate would have to be there and I may have to fix it first to establish the value unless you don't view small rust repair as an big deal.

Quote:

Originally Posted by coahmike00

text me if you still have that booster set up for drum/drum so I can arrange payment 205-903-5210 thanks

text sent

Quote:

Originally Posted by olblue60@aol.com

I would be interested in a 1967 right front fender if you would ship. Thanks

sorry no shipping on those

Dozers72 · 08-24-2013, 10:13 PM

how much for a front 6 lug hub and are you willing to ship?

Truckseats · 08-27-2013, 02:26 PM

PM sent. Thanks
Posted via Mobile Device

teeitup · 08-28-2013, 01:36 PM

Here ya go Ron
Posted via Mobile Device

1968k10blue · 08-29-2013, 01:35 AM

I saw your ad on craigslist too, but is there any chance I might be able to get a set of working front locking hubs? I live in mahtomedi so I could always drive over there but it may be a little while, kinda tight on money. but if I could get a price on some if you have any that would be great!

gdelaney · 09-04-2013, 04:37 PM

I'm in Elk River MN and I need an OEM front bumper for a 71-72 that I can re-chrome. How much for the one pictured on the K20 and how rough is it?

Thanks

gdelaney · 09-04-2013, 07:01 PM

Interested in a re-chromable 71-72 front bumper. Let me know if you have a pretty straight one.

I'm in Elk River and could drive down next week to pick up.

Thanks,
Greg

Vintage Windmills · 09-04-2013, 09:27 PM

Quote:

Originally Posted by gdelaney

I'm in Elk River MN and I need an OEM front bumper for a 71-72 that I can re-chrome. How much for the one pictured on the K20 and how rough is it?

Thanks

Pretty flippin straight. Only issue is what you see with the flaked chrome which now has surface rust on it. I'd do $135 on it

Quote:

Originally Posted by 1968k10blue

I saw your ad on craigslist too, but is there any chance I might be able to get a set of working front locking hubs? I live in mahtomedi so I could always drive over there but it may be a little while, kinda tight on money. but if I could get a price on some if you have any that would be great!

K10 or K20 and 67-68 or 69-72? THink all i've got to part with are k10 ones off a 1970. I could ship those to you if needed.

gdelaney · 09-04-2013, 11:04 PM

Ok I'll take the front bumper if it is that straight. Can you hold it until next week when I'm back in town? I can come out and pull it.

Johns66 · 09-04-2013, 11:57 PM

Do you have an a/c add on pulley for a short water pump?

All my brackets and pulleys are from a 72 short water pump.

Since it is small would you ship?

John
Waco, Texas 76712

Vintage Windmills · 09-04-2013, 11:57 PM

Quote:

Originally Posted by gdelaney

Ok I'll take the front bumper if it is that straight. Can you hold it until next week when I'm back in town? I can come out and pull it.

No problem- its already been pulled off so all you have to do is grab it.

Vintage Windmills · 09-07-2013, 10:21 AM

Quote:

Originally Posted by Johns66

Do you have an a/c add on pulley for a short water pump?

All my brackets and pulleys are from a 72 short water pump.

Since it is small would you ship?

John
Waco, Texas 76712

looks like we were typing at the same time. If you have pulley dimensions I can check. I have a couple loose ones here

puppyluppy · 09-08-2013, 11:01 AM

I need the bracket that holds the PS remote reservoir out of the way of the aux. battery on big block 67-72 trucks with both PS and the aux battery. Puppyluppy

kaphillips · 09-08-2013, 07:17 PM

What is the status of the bucket seat cab, is it being sold whole pick up, or will you piece out the bucket cab---I will take the under cab cross member brace.

Codymartinsen · 09-09-2013, 07:44 PM

Looking for a clean 72 grill bowtie

Vintage Windmills · 09-09-2013, 08:25 PM

Quote:

Originally Posted by Codymartinsen

Looking for a clean 72 grill bowtie

Already sold, sorry.

Quote:

Originally Posted by kaphillips

What is the status of the bucket seat cab, is it being sold whole pick up, or will you piece out the bucket cab---I will take the under cab cross member brace.

Sold that a long time ago. Kinda a pain to get out, thats for sure.

Quote:

Originally Posted by puppyluppy

I need the bracket that holds the PS remote reservoir out of the way of the aux. battery on big block 67-72 trucks with both PS and the aux battery. Puppyluppy

None right now, maybe in a few weeks.

JimmyBonz · 09-22-2013, 09:26 AM

TRYING to find a 4.10 Pumkin for an "EATON" Rear-End.A 3.73 Pumkin is my DREAM Set. Heard those were in the 'Camper Specials' I'm TRYING to get my 50 Chevy Truck "ON " the Highway instead of just Lookin at the Highway. ANY HELP would be Great.
Jimmy.

Vintage Windmills · 09-22-2013, 10:27 AM

Quote:

Originally Posted by JimmyBonz

TRYING to find a 4.10 Pumkin for an "EATON" Rear-End.A 3.73 Pumkin is my DREAM Set. Heard those were in the 'Camper Specials' I'm TRYING to get my 50 Chevy Truck "ON " the Highway instead of just Lookin at the Highway. ANY HELP would be Great.
Jimmy.

I have a couple 4.10 eaton ho52's here. I'd sell the center section for $125or whole axle for $175 picked up. Take a nice drive up this way and see the fall colors.

RCbowtie69 · 09-27-2013, 01:08 PM

Do you have a non tilt automatic steering column 69-72?

roger0080 · 09-28-2013, 11:18 PM

Are those split rims on the front and regular rims on the rear?

Are those 7.50x16 lug tires on the rear ?

Looking for 5 clean 8 bolt GM rims.

Thanks.

Vintage Windmills · 09-30-2013, 12:59 PM

Quote:

Originally Posted by roger0080

Are those split rims on the front and regular rims on the rear?

Are those 7.50x16 lug tires on the rear ?

Looking for 5 clean 8 bolt GM rims.

Thanks.

I have 16"x6 both split and 1 piece original rims in good condition. 2 sets of non split, 1 set powdercoated (fresh), and 1 set needs blasting/painting. I have lug tires but they have some weatherchecking. 7.5 x16 is what they likely are.

Quote:

Originally Posted by RCbowtie69

Do you have a non tilt automatic steering column 69-72?

Yes, but not interested in shipping at this time. Maybe once the snow flies.

08-23-2013, 01:21 PM	#101
Truckseats Registered User Join Date: Sep 2011 Location: Tri-Cities, Wa Posts: 1,612	Re: My little 67-72 parts yard- pickup only What condition is your tailgate in on your blue 1967? I have been looking for one. I understand you are not wanting to ship. Thanks Attached Images

08-23-2013, 03:26 PM	#102
69Rumbler Registered User Join Date: Jan 2013 Location: Los Angeles Posts: 903	Re: My little 67-72 parts yard- pickup only Looking for an review mirror for and 69 Posted via Mobile Device __________________ 1969 C20 CUSTOM "RUMBLEr"

08-23-2013, 03:28 PM	#103
69Rumbler Registered User Join Date: Jan 2013 Location: Los Angeles Posts: 903	Re: My little 67-72 parts yard- pickup only Will also like to know of you have any dash bezels with knobs I need them to make a blue print so I don't have to pull my off again Posted via Mobile Device __________________ 1969 C20 CUSTOM "RUMBLEr"

08-23-2013, 04:47 PM	#104
Dozers72 Registered User Join Date: Jul 2013 Location: Oswego, New York Posts: 11	Re: My little 67-72 parts yard- pickup only Do you have and 2 wheel drives with 6 lug front drum? Posted via Mobile Device

08-24-2013, 10:13 PM	#106
Dozers72 Registered User Join Date: Jul 2013 Location: Oswego, New York Posts: 11	Re: My little 67-72 parts yard- pickup only how much for a front 6 lug hub and are you willing to ship? __________________ 1972 Chevrolet C10 pickup. V8 355. 31x10.50s in the rear and all they do is smoke

08-27-2013, 02:26 PM	#107
Truckseats Registered User Join Date: Sep 2011 Location: Tri-Cities, Wa Posts: 1,612	Re: My little 67-72 parts yard- pickup only PM sent. Thanks Posted via Mobile Device

08-28-2013, 01:36 PM	#108
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: My little 67-72 parts yard- pickup only Here ya go Ron Posted via Mobile Device __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-29-2013, 01:35 AM	#109
1968k10blue Registered User Join Date: Aug 2013 Location: Mahtomedi, Minnesota Posts: 335	Re: My little 67-72 parts yard- pickup only I saw your ad on craigslist too, but is there any chance I might be able to get a set of working front locking hubs? I live in mahtomedi so I could always drive over there but it may be a little while, kinda tight on money. but if I could get a price on some if you have any that would be great!

09-04-2013, 04:37 PM	#110
gdelaney Registered User Join Date: Oct 2010 Location: Sandown NH Posts: 63	Re: My little 67-72 parts yard- pickup only I'm in Elk River MN and I need an OEM front bumper for a 71-72 that I can re-chrome. How much for the one pictured on the K20 and how rough is it? Thanks

09-04-2013, 07:01 PM	#111
gdelaney Registered User Join Date: Oct 2010 Location: Sandown NH Posts: 63	Re: My little 67-72 parts yard- pickup only Interested in a re-chromable 71-72 front bumper. Let me know if you have a pretty straight one. I'm in Elk River and could drive down next week to pick up. Thanks, Greg

09-04-2013, 11:04 PM	#113
gdelaney Registered User Join Date: Oct 2010 Location: Sandown NH Posts: 63	Re: My little 67-72 parts yard- pickup only Ok I'll take the front bumper if it is that straight. Can you hold it until next week when I'm back in town? I can come out and pull it.

09-04-2013, 11:57 PM	#114
Johns66 Registered User Join Date: Mar 2013 Location: Waco, Texas Posts: 411	Re: My little 67-72 parts yard- pickup only Do you have an a/c add on pulley for a short water pump? All my brackets and pulleys are from a 72 short water pump. Since it is small would you ship? John Waco, Texas 76712

09-08-2013, 11:01 AM	#117
puppyluppy Registered User Join Date: Aug 2011 Location: macon ga Posts: 123	Re: My little 67-72 parts yard- pickup only I need the bracket that holds the PS remote reservoir out of the way of the aux. battery on big block 67-72 trucks with both PS and the aux battery. Puppyluppy

09-08-2013, 07:17 PM	#118
kaphillips Registered User Join Date: Jul 2013 Location: Amarillo Tx Posts: 502	Re: My little 67-72 parts yard- pickup only What is the status of the bucket seat cab, is it being sold whole pick up, or will you piece out the bucket cab---I will take the under cab cross member brace.

09-09-2013, 07:44 PM	#119
Codymartinsen Registered User Join Date: Jul 2013 Location: Jackson, CA Posts: 29	Re: My little 67-72 parts yard- pickup only Looking for a clean 72 grill bowtie __________________ codymartinsen '72 SWB Highlander



Register or Log In To remove these advertisements.

09-22-2013, 09:26 AM	#121
JimmyBonz Registered User Join Date: Sep 2002 Location: Glenview,north of Chicago by 10 Miles Posts: 12	Re: My little 67-72 parts yard- pickup only TRYING to find a 4.10 Pumkin for an "EATON" Rear-End.A 3.73 Pumkin is my DREAM Set. Heard those were in the 'Camper Specials' I'm TRYING to get my 50 Chevy Truck "ON " the Highway instead of just Lookin at the Highway. ANY HELP would be Great. Jimmy. __________________ Jimmy Gatz

09-27-2013, 01:08 PM	#123
RCbowtie69 Registered User Join Date: Dec 2003 Location: Thomasville, NC Posts: 1,877	Re: My little 67-72 parts yard- pickup only Do you have a non tilt automatic steering column 69-72? __________________ My Truck: 2.5 drop front, 4 & 5/8 in rear, 350cubic in. been bored .60 over, 700r4 (soon), 3 speed (on tree for now).rims & tires size,15x8 ralleys 5 on 5,P275/60R15. Members I have met: Pickupman, 1972 Super Cheyenne, Stepside,Chis Mc Bride. tsnow67,joel.e,

09-28-2013, 11:18 PM	#124
roger0080 Registered User Join Date: Nov 2000 Location: Carver County, Minnesota, USA Posts: 626	Re: My little 67-72 parts yard- pickup only Are those split rims on the front and regular rims on the rear? Are those 7.50x16 lug tires on the rear ? Looking for 5 clean 8 bolt GM rims. Thanks. Attached Images __________________ 72 Chev C-10 90% restored (former AZ truck) ... 71 Chev K-20 Cheyenne my vacation crusier... 72 Chev C-10 Now retired and striped after many faithful miles... 72 GMC 1500 Retired to the junk yard after bought new in '71...

Register or Log In To remove these advertisements.