![]() |
![]() |
#1 |
Registered User
Join Date: Jan 2003
Location: Snead, Alabama
Posts: 399
|
![]()
I checked every bulb, and they work, took dash out and touched the circut board and there is power to light circut, but still no lights, any ideas,
Thanks guys.
__________________
Jock, Powder blasting shop, Alabama |
![]() |
![]() |
![]() |
#2 |
Wiseass secured himself a BAN
Join Date: Nov 2000
Location: MOON!!!
Posts: 2,282
|
Here is what I did when I had that problem. Take the cluster back out and take out each bulb and rub a pencil erasure on each place where the bulb contacts the copper. Reinstall the bulbs. the bulbs complete a circuit. So if one bulb is bad or not gettin power, then the rest will not work. I played with mine for 30+ minutes until they all worked. Worked great for me. the bulbs are very touchy.
Last edited by 67Fleetsidedream; 12-05-2003 at 08:37 PM. |
![]() |
![]() |
![]() |
#3 |
Inline 69
Join Date: Apr 2003
Location: valleysprings,california
Posts: 1,018
|
i had same problem,,,,,,,
it drove me nuts,,,,,there is a "little clip",that has a small black wire, thats a ground,,,,the clip slides over the dash opening(metal edge).the wire "should" be on the right side of the dash opening,,,,,,,,,the clip will look very similar to the one in the pic,,,,,,(your gonna have to take the dash back apart to find it) jeff
|
![]() |
![]() |
![]() |
#4 |
CCRider
Join Date: Feb 2000
Location: Olive Branch,MS,USA
Posts: 2,232
|
Yep...I vote for the "little clip" I cut mine off and put a real connector on it and fastened it to some metal with a screw
__________________
72 GMC Sierra SWB almost finished---- 84 Softail Olive Branch MS |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Feb 2003
Location: The Rubber City
Posts: 5,498
|
When I first got my truck, if you turned on the 4 ways, it would blow a fuse that was the tail/brake lights and the instrument lights. Maybe check your fuses?
__________________
1969 GMC K2500 ![]() 1996 Honda Accord 2007 Kawasaki KLR 650 |
![]() |
![]() |
![]() |
#6 |
Cause the Chicks DIG IT!!
Join Date: Nov 2003
Location: Beaufort SC
Posts: 509
|
I agree with checking the black wire clip for the ground. That controls your dash lights. If i unplugged mine the dash lights would go out and the high beam warning light would come on.
![]() |
![]() |
![]() |
![]() |
#7 |
PROJECT 7DEUCE
![]() Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,608
|
I had the same problem ..Just ran a ground wire from the cluster to the dash...Good ground = bright lights.
__________________
GO BIG GREEN ![]() MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Jan 2003
Location: Snead, Alabama
Posts: 399
|
Responses
Thank you so much for your input, I'll try that tomorrow morning. has been a frustrating day taking several apart and changing things over,
Has anyone ever put after market guages in the guage openings?
__________________
Jock, Powder blasting shop, Alabama |
![]() |
![]() |
![]() |
#9 |
PROJECT 7DEUCE
![]() Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,608
|
Yep but I only had 2 guage's whaen I bought my new bezel and I just had to see what they would look like ... I still only have 2 guage's installed.... Just need to find the time..
__________________
GO BIG GREEN ![]() MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. |
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Oct 2003
Location: Arlington, wa
Posts: 23
|
I had the same issue, found that I had sliced one of the tracers on the PCB board putting the bezel back in to the dash....
|
![]() |
![]() |
![]() |
#11 |
Join Date: Dec 1999
Location: Eastern - Manitoba Canada, Winnipeg
Posts: 4,369
|
My 70 GMC had similar problem bit I ended up changing the floor dimmer switch, headlight switch, turn signal switch and regulator. Not a great time finding the problem but I had parts to swap and try and mine needed all I listed.
__________________
Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife. |
![]() |
![]() |
![]() |
Bookmarks |
|
|