headers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

c20pickup · 09-12-2013, 02:30 PM

is anyone offering stainless steel or ceramic coated headers for our trucks? I have an old set of headman's that I painted with high temp vht paint, but not sure how that will hold up for any amount of time. I would like to keep the headers looking good (no rust) for as long as possible. I purchased my current headers out of the lmc magazine and they fit great, just looking for an upgrade

BlackedOut67shorty · 09-12-2013, 05:41 PM

Sanderson, doug thorly and some that just make them custom.. hope your wallet is big enough they start around a grand about
Posted via Mobile Device

Lee H · 09-12-2013, 06:02 PM

Most of the large and medium header manufactures make them for our trucks and they come in a wide variety of prices. I've read hedman now makes them specifically for 67-72s. Hit a few web sites and check them out.
Posted via Mobile Device

**396ci** · 09-12-2013, 06:25 PM

i got mine from early classic in fresno and i really like them but i did have to run a 'short' spark plug as they fit close to the block. they are ceramic, mid-length, coated on the inside also, and not too hard on the wallet (less than 4 bills).

*Fitz* · 09-12-2013, 08:48 PM

Quote:

Originally Posted by BlackedOut67shorty

Sanderson, doug thorly and some that just make them custom.. hope your wallet is big enough they start around a grand about
Posted via Mobile Device

Sanderson long tube ceramic coated for Chevy big block: $355.00 no where near a grand!

96blazr · 09-12-2013, 09:54 PM

I use Hedman HTC Elite Ceramic Coated Headers:
BEST HEADER ON THE MARKET!!

http://www.hedman.com/C10-Truck-Headers

http://www.summitracing.com/parts/he...up?prefilter=1

BlackedOut67shorty · 09-12-2013, 09:56 PM

Quote:

Originally Posted by Fitz

Sanderson long tube ceramic coated for Chevy big block: $355.00 no where near a grand!

I was more looking at stainless... sorry I didn't specify
Posted via Mobile Device

**70cst** · 09-12-2013, 11:20 PM

I had a set of Doug Thorely Tri-Y's and was well pleased...

http://dougthorleyheaders.com/products/sfID1/9

*Fitz* · 09-13-2013, 09:35 AM

Quote:

Originally Posted by BlackedOut67shorty

I was more looking at stainless... sorry I didn't specify
Posted via Mobile Device

OOPS! Stainless Works can make them but they want a lot of pennies for those. You know they will turn blue from the heat?

c20pickup · 09-13-2013, 01:53 PM

Quote:

Originally Posted by 96blazr

I use Hedman HTC Elite Ceramic Coated Headers:
BEST HEADER ON THE MARKET!!

http://www.hedman.com/C10-Truck-Headers

http://www.summitracing.com/parts/he...up?prefilter=1

i like the hedmans because mine have been trouble free, except the look, which im really anal about. how much were these if you don't mind me asking? they look great by the way!!! I checked hedmans website yesterday and the stainless steel were 1800$ I think I did something wrong haha

c20pickup · 09-13-2013, 01:54 PM

Quote:

Originally Posted by Fitz

OOPS! Stainless Works can make them but they want a lot of pennies for those. You know they will turn blue from the heat?

I don't mind the bluing and what not, that looks somewhat natural, but I hate rust! rust is evil lol

c20pickup · 09-13-2013, 01:56 PM

Quote:

Originally Posted by c20pickup

i like the hedmans because mine have been trouble free, except the look, which im really anal about. how much were these if you don't mind me asking? they look great by the way!!! I checked hedmans website yesterday and the stainless steel were 1800$ I think I did something wrong haha

I see the price now, sorry, 339$ thanks man! I love that look! where di you get the shiny coolant hoses/pipes? your engine bay looks sick!

c20pickup · 09-13-2013, 01:58 PM

Quote:

Originally Posted by 396ci

i got mine from early classic in fresno and i really like them but i did have to run a 'short' spark plug as they fit close to the block. they are ceramic, mid-length, coated on the inside also, and not too hard on the wallet (less than 4 bills).

is yours for a big block or small block? I see your name is 396ci. I need mine forf a small block application

*Fitz* · 09-13-2013, 08:32 PM

Quote:

Originally Posted by c20pickup

I don't mind the bluing and what not, that looks somewhat natural, but I hate rust! rust is evil lol

Rust. It is the malignant growth that tries to turn our trucks back into the crushed rocks they were made from!

swamp rat · 09-13-2013, 09:05 PM

Doug Thorley Try Y headers since 1996, never had an issue except having to run shorty plugs.

96blazr · 09-13-2013, 11:23 PM

Quote:

Originally Posted by c20pickup

i like the hedmans because mine have been trouble free, except the look, which im really anal about. how much were these if you don't mind me asking? they look great by the way!!! I checked hedmans website yesterday and the stainless steel were 1800$ I think I did something wrong haha

Quote:

Originally Posted by c20pickup

I see the price now, sorry, 339$ thanks man! I love that look! where di you get the shiny coolant hoses/pipes? your engine bay looks sick!

Thanks for the compliments. Some guys don't want to pay $339 for headers, but I figured I can pay now and NEVER have to deal with them again. That's why I also went with a total Stainless Steel exhaust system and Stainless Steel Muffler (Hooker Aerochamber SS Mufflers), so I won't have to deal with my exhaust EVER! Those hoses are from a company called Coolflex. www.coolflex.com
You can buy other brands on ebay, but I went with Coolflex. They work Fantastic and reduce my heat. They are worth every dime.

GASoline71 · 09-13-2013, 11:28 PM

Quote:

Originally Posted by Fitz

Rust. It is the malignant growth that tries to turn our trucks back into the crushed rocks they were made from!

...and rust never sleeps.

Gary

jmorri34 · 09-14-2013, 09:54 PM

I have these set of stainless shorties I need to get rid of, PM me if you wanna talk

09-12-2013, 02:30 PM	#1
c20pickup Registered User Join Date: Apr 2013 Location: Brighton, WI Posts: 504	headers is anyone offering stainless steel or ceramic coated headers for our trucks? I have an old set of headman's that I painted with high temp vht paint, but not sure how that will hold up for any amount of time. I would like to keep the headers looking good (no rust) for as long as possible. I purchased my current headers out of the lmc magazine and they fit great, just looking for an upgrade

09-12-2013, 05:41 PM	#2
BlackedOut67shorty Registered User Join Date: Aug 2012 Location: error 404 location not found Posts: 816	Re: headers Sanderson, doug thorly and some that just make them custom.. hope your wallet is big enough they start around a grand about Posted via Mobile Device __________________ 1995 s10 blazer 4.3 1967 c10 350/350 fleet short 1993 s10 blazer 4.3l 4l60 RIP 6/20/14 2000 mercury sable Thats a how I roll

09-12-2013, 06:02 PM	#3
Lee H Registered User Join Date: Jun 2010 Location: Upland Ca Posts: 4,147	Re: headers Most of the large and medium header manufactures make them for our trucks and they come in a wide variety of prices. I've read hedman now makes them specifically for 67-72s. Hit a few web sites and check them out. Posted via Mobile Device __________________ 1972 C10 SWB, Air, PS, PB, 350/350THM. Second owner. 1965 Corvette roadster, 44K miles, 327/365 SHP, 4 speed, side exhaust, knockoffs, teak, second owner (bought in 1970), Have ALL numbers matching components. My frame off restoration thread: http://67-72chevytrucks.com/vboard/s...d.php?t=556703

09-12-2013, 06:25 PM	#4
396ci Senior Member Join Date: Jun 2005 Location: Modesto, CA Posts: 802	Re: headers i got mine from early classic in fresno and i really like them but i did have to run a 'short' spark plug as they fit close to the block. they are ceramic, mid-length, coated on the inside also, and not too hard on the wallet (less than 4 bills). __________________ Brian XNGH ECV Chapter 58 1972 Jimmy / Blazer Project 2wd 1974 Chevy Crew Cab Shorty

09-12-2013, 09:54 PM	#6
96blazr Registered User Join Date: Aug 2003 Location: VA Posts: 740	Re: headers I use Hedman HTC Elite Ceramic Coated Headers: BEST HEADER ON THE MARKET!! http://www.hedman.com/C10-Truck-Headers http://www.summitracing.com/parts/he...up?prefilter=1 Attached Images __________________ 1968 SWB. GMPP 350/350 Turbo Trans, Edelbrock Performer & Carb. Hedman Hedders, Hooker Aerochambers Mufflers. Tuff Stuff Alternators. Remember, no matter where you go, There you are. Gary Last edited by 96blazr; 09-12-2013 at 10:00 PM.

09-12-2013, 11:20 PM	#8
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,373	Re: headers I had a set of Doug Thorely Tri-Y's and was well pleased... http://dougthorleyheaders.com/products/sfID1/9 __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

09-13-2013, 09:05 PM	#15
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: headers Doug Thorley Try Y headers since 1996, never had an issue except having to run shorty plugs. __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

09-14-2013, 09:54 PM	#18
jmorri34 Registered User Join Date: Sep 2012 Location: Spring, Tx. Posts: 479	Re: headers I have these set of stainless shorties I need to get rid of, PM me if you wanna talk Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.