Will my truck be lower or higher with this setup *Pics*

[Stevo427]

By looking at these pictures as a reference. Do you think my truck would be lower in the front if I got some CPP Modular 2" Drop spindles paired with some 3" Drop springs. I'm in need of a front end rebuild and was looking to get some new drop spindles and coils along the way also. Was also looking at the 4" drop springs which combined would give me a static 6" drop in the front. The truck is no longer my daily driver so I'm not worried about it being static in the front. Need some opinions as I might likely be driving to cpp tomorrow to pick up this stuff.



Wheels are 15" rallys ...Fronts 255/60/15..

[PAWS 72]

Steveo I like the stance now. But alot like them lower. It looks good like it is.

BTW, what is the drop now?

[Stevo427]

Originally Posted by PAWS 72

Steveo I like the stance now. But alot like them lower. It looks good like it is.

BTW, what is the drop now?

I dig the stance it's at now to. But I want the tires to be close to the lip of the wheel wells if not tucked a tiny bit. I don't know the current drop on the truck but if I had to guess id say maybe 3/5 ish. When I got the truck 2 or so years ago it was already done. I put the c-notch in and turned it into a swb. When I put the rally's with the new tires it dropped the truck a little more. It's riding on cut coils only so It's in need of a rebuild.

[c10Dream'n]

Here's a pic of mine after installing a 4/6 kit from Early Classic Enterprises.
I added 1" lowering blocks in the rear to even out the stance, so it's actually a 4/7 now

Front:
2" drop spindles / 2" drop coils / drop shocks

Rear:
6" drop coils

Wheels are TTII's w/ 255/55/17 all the way around

[romes20]

great looking truck, perfect stance.

[STOCKISH]

Thats a sharp truck!