CA Utility/Mechanics Bed 8' "Harbor" low profile - The 1947 - Present Chevrolet & GMC Truck Message Board Network

budnikguy · 10-05-2013, 10:56 AM

Fully functional manufactured by Harbor in Harbor City, CA utility/mechanics low profile bed ready to be removed from my 1971 C20. All doors open and close properly have shelves and I believe I have keys. $200.00

Adam

budnikguy · 10-30-2013, 05:07 PM

ttt

deancrozon · 02-17-2014, 08:33 AM

Did you sell the bed?

budnikguy · 02-17-2014, 10:35 AM

Still available.

BrianV · 02-17-2014, 10:58 PM

I see a suburban in the background what kind of shape is it in and is it for sale?

Brian

budnikguy · 08-22-2014, 11:20 AM

anyone need this?!

budnikguy · 03-27-2015, 02:44 PM

still have this...

**special-K** · 03-27-2015, 08:25 PM

Still want it. Is it impossible to think this could be shipped cross-country?

budnikguy · 03-27-2015, 09:11 PM

yeah...would cost a fortune

Quote:

Originally Posted by special-K

Still want it. Is it impossible to think this could be shipped cross-country?

**special-K** · 03-28-2015, 06:57 AM

I'm mostly concerned with how it would be handled and having it arrive w/o damage. What about the whole truck? Is that a consideration? Non-operable vehicles are a specialized shipment as well, but far more feasible I would think. This type bed was never offered back east. I remember these from my time in CA and my K2500 is a white unrestored CA truck. I wondered if you ever sold it, never forgot you had it. Just seemed far fetched, but I'd like to at least check into all possibilities. I had been willing to settle for a long Stepside w/bins, but so far no success there, either. I'm a utility body kinda guy who has been w/o for far too long. Let's see what we can do. I'll take it and pay right away. But, I feel I need to work out getting it out of there first. That's the only reason I didn't buy it when you first posted it. But, I kinda forgot bout it. I don't screw people around.

**davischevy** · 03-28-2015, 09:46 PM

Tim, you might consider posting an ad for somone going east with an empty trailer.

Too late now, but, my uncle came from California to here with an emty trailer a while back. I'm sure someone else will be in the same situation at some point.

Just a thought.
Larry

**special-K** · 03-28-2015, 11:17 PM

We used to have a "Transportation Board". I wonder where I should post a thread, General Discussion? I know shipping to, say, Indianapolis is way cheaper for freight. Not just the shorter distance, but it actually costs more per mile to the east. I would drive to the Mississippi or a bit more (Arkansas). i;m serious. One of my personal mottos: If there's a wheel there's a way

**davischevy** · 04-02-2015, 10:35 PM

K, believe it or not, a trip to Frederick is brewing, and I will be dragging an empty trailer going east. The details are not worked our yet, but i couldn't believe it when they asked me in the office if I wanted to take a road trip to Fredrick, MD.

They mostly find me places to go so they won't have to listen to me gripe.

dmartin1 · 04-02-2015, 11:03 PM

This is a sweet deal on the bed.if I had use for a utility bed I'd snag this up good luck fellas

**special-K** · 04-03-2015, 12:18 AM

Larry, if nothing else we'll have to get together. I'm sending a PM to ask if I can buy the whole (what's left of) truck. I think that would be best, if doable. Then, it's how to get it to Arkansas

**chevy2tom** · 04-03-2015, 06:44 AM

Anybody headed to Chicago? I'd love to have it on my 71 C20. If you were closer I'd pull the bed off of mine & road trip to pick it up. Always wanted a utility bed.

**special-K** · 04-03-2015, 08:46 PM

I'm still waiting for a response. Sent PM,too. If someone could haul it to Chicago, that's not too far from Larry. That would be great!

**chevy2tom** · 04-03-2015, 09:11 PM

special-k, if it makes it to Chicago you'll never see it! Except on my truck! Lol

**LockDoc** · 04-03-2015, 10:29 PM

Quote:

Originally Posted by special-K

I'm still waiting for a response. Sent PM,too. If someone could haul it to Chicago, that's not too far from Larry. That would be great!

Tim,

If you could get it as far as my place I have plenty of room to store it until you could come and get it, or find someone going East from here.... I'm only 7 miles south of I-80.

LockDoc
.

**leddzepp** · 04-04-2015, 02:44 AM

If I had a truck to put it on, it would already be mine

. The ultimate tool box.

**special-K** · 04-04-2015, 08:03 AM

Chevy2tom, the only thing is I'm ahead of you. No hard feelings, just saying. As I said, still waiting for a response from the seller. Your "if" is the same as my "if" and "if" it could get that far east I have a way to get it the rest of the way.

Leon, that is a greatly appreciated offer. Great timing, too. I just bought a dozen old partial trucks I am having hauled three at a time on a flatbed semi, from Nebraska ASAP. All I need is your address so I can get this thing rollin'

Scott, don't buy any more trucks! mmm-k?

I am hoping to either buy the whole truck, if available, buy another running one out there and mount to ship, or fly out, buy a '90s truck (I also kinda need), rent a u-Haul trailer, and bring that puppy home

**chevy2tom** · 04-04-2015, 08:55 AM

No hard feelings Tim, I'm just yanking your chain although I'd love th have one for my truck. Good luck

ranger danger · 04-04-2015, 09:02 AM

For shipping try the links I provided. I used to own one of these and this is exactly the kind of freight we looked for!! The firs one is the guy I worked with. His name is Gary.

http://hotshotltlcarrier.com/forum.html

http://www.hotshotlogistics.net/

budnikguy · 04-04-2015, 10:40 AM

Ok, sorry for being MIA, work has consumed me for the last two weeks. The utility Box is still available, the original frame etc is long gone from this particular truck, but, we could work something out in putting it onto a rolling frame. If you want to work on the logistics I am more than willing to get it set for it to be easily shipped/transported. My zip is 92508. Could maybe have it cráter and ship vía a freight company, I have done this recently with a cab and front clip and this would Actually be easier to "crate" and take to the freight company. Lmk
Adam

**chevy2tom** · 04-04-2015, 10:55 AM

If for some reason Tim passes on this please put me in line. Thanks, Tom

10-05-2013, 10:56 AM	#1
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Utility/Mechanics Bed 8' "Harbor" low profile Fully functional manufactured by Harbor in Harbor City, CA utility/mechanics low profile bed ready to be removed from my 1971 C20. All doors open and close properly have shelves and I believe I have keys. $200.00 Adam

10-30-2013, 05:07 PM	#2
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: Utility/Mechanics Bed 8' "Harbor" low profile ttt

02-17-2014, 08:33 AM	#3
deancrozon Registered User Join Date: Feb 2014 Location: Humboldt, Saskatchewan Posts: 1	Re: Utility/Mechanics Bed 8' "Harbor" low profile Did you sell the bed?

02-17-2014, 10:35 AM	#4
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: Utility/Mechanics Bed 8' "Harbor" low profile Still available.

02-17-2014, 10:58 PM	#5
BrianV Registered User Join Date: Mar 2010 Location: Mesa, Az Posts: 364	Re: Utility/Mechanics Bed 8' "Harbor" low profile I see a suburban in the background what kind of shape is it in and is it for sale? Brian

08-22-2014, 11:20 AM	#6
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: Utility/Mechanics Bed 8' "Harbor" low profile anyone need this?!

03-27-2015, 02:44 PM	#7
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: Utility/Mechanics Bed 8' "Harbor" low profile still have this...

03-27-2015, 08:25 PM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: Utility/Mechanics Bed 8' "Harbor" low profile Still want it. Is it impossible to think this could be shipped cross-country? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-28-2015, 06:57 AM	#10
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: Utility/Mechanics Bed 8' "Harbor" low profile I'm mostly concerned with how it would be handled and having it arrive w/o damage. What about the whole truck? Is that a consideration? Non-operable vehicles are a specialized shipment as well, but far more feasible I would think. This type bed was never offered back east. I remember these from my time in CA and my K2500 is a white unrestored CA truck. I wondered if you ever sold it, never forgot you had it. Just seemed far fetched, but I'd like to at least check into all possibilities. I had been willing to settle for a long Stepside w/bins, but so far no success there, either. I'm a utility body kinda guy who has been w/o for far too long. Let's see what we can do. I'll take it and pay right away. But, I feel I need to work out getting it out of there first. That's the only reason I didn't buy it when you first posted it. But, I kinda forgot bout it. I don't screw people around. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 04-04-2015 at 08:06 AM.

03-28-2015, 09:46 PM	#11
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,815	Re: Utility/Mechanics Bed 8' "Harbor" low profile Tim, you might consider posting an ad for somone going east with an empty trailer. Too late now, but, my uncle came from California to here with an emty trailer a while back. I'm sure someone else will be in the same situation at some point. Just a thought. Larry __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

03-28-2015, 11:17 PM	#12
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: Utility/Mechanics Bed 8' "Harbor" low profile We used to have a "Transportation Board". I wonder where I should post a thread, General Discussion? I know shipping to, say, Indianapolis is way cheaper for freight. Not just the shorter distance, but it actually costs more per mile to the east. I would drive to the Mississippi or a bit more (Arkansas). i;m serious. One of my personal mottos: If there's a wheel there's a way __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-02-2015, 10:35 PM	#13
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,815	Re: Utility/Mechanics Bed 8' "Harbor" low profile K, believe it or not, a trip to Frederick is brewing, and I will be dragging an empty trailer going east. The details are not worked our yet, but i couldn't believe it when they asked me in the office if I wanted to take a road trip to Fredrick, MD. They mostly find me places to go so they won't have to listen to me gripe. __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

04-02-2015, 11:03 PM	#14
dmartin1 Registered User Join Date: Aug 2008 Location: mohave valley,arizona Posts: 1,088	Re: Utility/Mechanics Bed 8' "Harbor" low profile This is a sweet deal on the bed.if I had use for a utility bed I'd snag this up good luck fellas __________________ 1969 Shortbed in progress 1982 short step, few suspension and motor upgrades.getting a 468 1978 Shortbed fleet side bonanza fully loaded 1978 k20 Silverado loaded.currently engine-less 1989 k10 suburban 9" lift 65 nova And more

04-03-2015, 12:18 AM	#15
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: Utility/Mechanics Bed 8' "Harbor" low profile Larry, if nothing else we'll have to get together. I'm sending a PM to ask if I can buy the whole (what's left of) truck. I think that would be best, if doable. Then, it's how to get it to Arkansas __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-03-2015, 06:44 AM	#16
chevy2tom Senior Member Join Date: Aug 2009 Location: Wheeling, Illinois Posts: 703	Re: Utility/Mechanics Bed 8' "Harbor" low profile Anybody headed to Chicago? I'd love to have it on my 71 C20. If you were closer I'd pull the bed off of mine & road trip to pick it up. Always wanted a utility bed.



Register or Log In To remove these advertisements.

04-03-2015, 08:46 PM	#17
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: Utility/Mechanics Bed 8' "Harbor" low profile I'm still waiting for a response. Sent PM,too. If someone could haul it to Chicago, that's not too far from Larry. That would be great! __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-03-2015, 09:11 PM	#18
chevy2tom Senior Member Join Date: Aug 2009 Location: Wheeling, Illinois Posts: 703	Re: Utility/Mechanics Bed 8' "Harbor" low profile special-k, if it makes it to Chicago you'll never see it! Except on my truck! Lol

04-04-2015, 02:44 AM	#20
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,996	Re: Utility/Mechanics Bed 8' "Harbor" low profile If I had a truck to put it on, it would already be mine . The ultimate tool box. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

04-04-2015, 08:03 AM	#21
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: Utility/Mechanics Bed 8' "Harbor" low profile Chevy2tom, the only thing is I'm ahead of you. No hard feelings, just saying. As I said, still waiting for a response from the seller. Your "if" is the same as my "if" and "if" it could get that far east I have a way to get it the rest of the way. Leon, that is a greatly appreciated offer. Great timing, too. I just bought a dozen old partial trucks I am having hauled three at a time on a flatbed semi, from Nebraska ASAP. All I need is your address so I can get this thing rollin' Scott, don't buy any more trucks! mmm-k? I am hoping to either buy the whole truck, if available, buy another running one out there and mount to ship, or fly out, buy a '90s truck (I also kinda need), rent a u-Haul trailer, and bring that puppy home __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 04-04-2015 at 08:08 AM.

04-04-2015, 08:55 AM	#22
chevy2tom Senior Member Join Date: Aug 2009 Location: Wheeling, Illinois Posts: 703	Re: Utility/Mechanics Bed 8' "Harbor" low profile No hard feelings Tim, I'm just yanking your chain although I'd love th have one for my truck. Good luck

04-04-2015, 09:02 AM	#23
ranger danger Registered User Join Date: Jan 2015 Location: Vacaville CA Posts: 896	Re: Utility/Mechanics Bed 8' "Harbor" low profile For shipping try the links I provided. I used to own one of these and this is exactly the kind of freight we looked for!! The firs one is the guy I worked with. His name is Gary. http://hotshotltlcarrier.com/forum.html http://www.hotshotlogistics.net/

04-04-2015, 10:40 AM	#24
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: Utility/Mechanics Bed 8' "Harbor" low profile Ok, sorry for being MIA, work has consumed me for the last two weeks. The utility Box is still available, the original frame etc is long gone from this particular truck, but, we could work something out in putting it onto a rolling frame. If you want to work on the logistics I am more than willing to get it set for it to be easily shipped/transported. My zip is 92508. Could maybe have it cráter and ship vía a freight company, I have done this recently with a cab and front clip and this would Actually be easier to "crate" and take to the freight company. Lmk Adam

04-04-2015, 10:55 AM	#25
chevy2tom Senior Member Join Date: Aug 2009 Location: Wheeling, Illinois Posts: 703	Re: Utility/Mechanics Bed 8' "Harbor" low profile If for some reason Tim passes on this please put me in line. Thanks, Tom

Register or Log In To remove these advertisements.