Cruise Question. Expert help needed. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**JQ-72** · 12-09-2003, 01:55 AM

I am wanting to add a cruise control unit to my 72 truck restoration project. I want to use the correct engage button for 1972. I think it was a dealer option that year. Anyway, which one?? Thanks for any help.

Joshua

**JQ-72** · 12-09-2003, 01:56 AM

2

**JQ-72** · 12-09-2003, 01:57 AM

3

Longhorn Man · 12-09-2003, 02:06 AM

I would not be the 3rd one...in 72 it was an under dash deal.
No clue as to which one of the first two though.

Rod · 12-09-2003, 11:43 PM

Pic 1 or 2 I'd say. No to pic 3

pickupman · 12-10-2003, 12:24 AM

Joshua, I believe it is the first one, but I cannot be for certain. I have some literture around here somewhere that shows it and have one out of a 72 somewhere. I will try to find it.
Bill

pickupman · 12-10-2003, 12:27 AM

BY the way, I am no expert, might have jumped on a thread I shouldn't have. LOL

724x4a/cchevy · 12-10-2003, 01:01 AM

Ive seen two cruse controled trucks and they both had cruise control switches in the turn signal levers, LMC sells reproduction ones the part # is 34-0793 Look it up if you dont believe me! It looks somewhat like pic #3

Longhorn Man · 12-10-2003, 01:20 AM

724x4...in 72, it was not in the turn signal. I have dated material fro GM to the dealer ships showing the chainges in the 72 line up, and that is one of the few things listed in the trucks.
I'll see if I can't try to remember how to use this stupid scanner they got me last year....

Longhorn Man · 12-10-2003, 02:11 AM

This is the book I get this from...

Longhorn Man · 12-10-2003, 02:12 AM

And here is the cropped down version.
There were chianges in the cruise controll from year to year. I have other pages scanned showing (in detail) how it chainged from 70 to 71, including troubleshooting, schematics, and pages of stuff so booring it would put you to sleep.

12-09-2003, 01:55 AM	#1
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,625	Cruise Question. Expert help needed. I am wanting to add a cruise control unit to my 72 truck restoration project. I want to use the correct engage button for 1972. I think it was a dealer option that year. Anyway, which one?? Thanks for any help. Joshua Attached Images

12-09-2003, 01:56 AM	#2
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,625	2 Attached Images

12-09-2003, 11:43 PM	#5
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	Pic 1 or 2 I'd say. No to pic 3 __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

12-10-2003, 12:24 AM	#6
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,097	Joshua, I believe it is the first one, but I cannot be for certain. I have some literture around here somewhere that shows it and have one out of a 72 somewhere. I will try to find it. Bill __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

12-10-2003, 12:27 AM	#7
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,097	BY the way, I am no expert, might have jumped on a thread I shouldn't have. LOL __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

12-09-2003, 01:57 AM	#3
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,625	3 Attached Images

12-09-2003, 02:06 AM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	I would not be the 3rd one...in 72 it was an under dash deal. No clue as to which one of the first two though.

12-10-2003, 01:01 AM	#8
724x4a/cchevy Self-proclaimed LED man Join Date: Nov 2003 Location: Harrisburg, Missouri Posts: 1,021	Ive seen two cruse controled trucks and they both had cruise control switches in the turn signal levers, LMC sells reproduction ones the part # is 34-0793 Look it up if you dont believe me! It looks somewhat like pic #3 __________________ My LED Website My Photobucket Album of LED's Ask me about hand-made custom L.E.D brake and reverse lights. <- LINK I also do LED: -Third Brake/Cargo -Brake (truck and burb) -Reverse (truck and burb) -67-68 Front Turn Signals -69-70 Front Turn Signals -71-72 Front Turn Signals -GMC Front Turn Signals I can also do custom lights for other vehicles....i did a set for a AMC Gremlin once Norwood Survivor

12-10-2003, 01:20 AM	#9
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	724x4...in 72, it was not in the turn signal. I have dated material fro GM to the dealer ships showing the chainges in the 72 line up, and that is one of the few things listed in the trucks. I'll see if I can't try to remember how to use this stupid scanner they got me last year.... Last edited by Longhorn Man; 12-10-2003 at 01:54 AM.

12-10-2003, 02:11 AM	#10
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	This is the book I get this from... Attached Images

12-10-2003, 02:12 AM	#11
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	And here is the cropped down version. There were chianges in the cruise controll from year to year. I have other pages scanned showing (in detail) how it chainged from 70 to 71, including troubleshooting, schematics, and pages of stuff so booring it would put you to sleep. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.