The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 10-06-2013, 01:54 PM   #1
AnlaufJohn
Registered User
 
Join Date: Feb 2009
Location: Lebanon, Oregon
Posts: 130
Battery cables and battery choices

I am needing a new battery. The old one was in the truck when I purchased it. It is now 8 years old and struggles to spin the starter, dropping down to less than 8 volts when cranking. I used to work in a shop, so I understand voltage and amps, so the best I can describe its behavior is of a tree that has a rotten core. Hollow inside, but strong bark on the outside.
This battery is side-terminal and I wonder if I should change over to top terminal, just because that's what my 1966 C-10 would have had in it back in 1966?
The side-terminal design lessens the acid corrosion at the terminal, and I want this to be trouble-free.
I know the Group 24 will fit, but an option that presented itself when I called about batteries was a dual terminal battery, one with side and top terminals.
Ooh!! The dual is a group 78 and is a bit shorter, so it will still fit.
My question to the forum is: which battery and which terminal?
Group 24 is top only, Group 78 is dual, thus the choice.
Thank you,
John
__________________
Eugene, Oregon
Lucy's Limousine
1966 C-10 LWB
283 w/ 2bbl, OE carb and dist.
4 spd (granny 1st) w/ 3.73 rear end
AnlaufJohn is offline   Reply With Quote
Old 10-06-2013, 04:51 PM   #2
aerotruk63
Check The Champ, Demonstrator
 
aerotruk63's Avatar
 
Join Date: Jun 2009
Location: Montreal,Quebec
Posts: 6,627
Re: Battery cables and battery choices

Sometimes we put to much thought into the simplest things. How are you building your truck? Original or all out tech?
__________________
1963 Chevrolet Truck Literature
LINK: https://picasaweb.google.com/113840717762774560215

YouTube Channel with 20+ Original Chevrolet Truck Salesmen, Mechanics & Service Department Training Slideshows.
https://www.youtube.com/results?sear...otruk63&page=1
aerotruk63 is offline   Reply With Quote
Old 10-06-2013, 06:33 PM   #3
AnlaufJohn
Registered User
 
Join Date: Feb 2009
Location: Lebanon, Oregon
Posts: 130
Re: Battery cables and battery choices

I am trying to keep it looking as stock as possible, but making improvements where they make sense. I have upgraded the wiring, all the way to the tail lights. HEI is pending, as is a toss-up between QuadraJet or FI.
I know the battery is at its end, straining to get those pesky electrons to the starter.
I may end up jumping the silly thing, but this will be a daily/weekly driver for me.
John
__________________
Eugene, Oregon
Lucy's Limousine
1966 C-10 LWB
283 w/ 2bbl, OE carb and dist.
4 spd (granny 1st) w/ 3.73 rear end
AnlaufJohn is offline   Reply With Quote
Old 10-07-2013, 01:52 AM   #4
jtrichard
Registered User
 
Join Date: Jun 2013
Location: joshua tree ca.
Posts: 1,484
Re: Battery cables and battery choices

you are already wired for side i would stick with that ;it is better then post ... you are NOT making a showroom floor model.... I have a 63 that i am doing suspension upgrades and diesel But the outside and in the cab will look all original
jtrichard is offline   Reply With Quote
Old 10-07-2013, 02:33 PM   #5
AnlaufJohn
Registered User
 
Join Date: Feb 2009
Location: Lebanon, Oregon
Posts: 130
Re: Battery cables and battery choices

jtrichard,
Thank you for sharing the idea of staying with the side terminal connections.
Corrosion is less on side mount and since I already have OE type cables (molded cable ends), I don't need the top mount for any reason that I can justify.
The old battery was tested and was on the border between good and bad, just shading the good side. It is now a core and the new battery is installed.
That starter zings now. Music to my ears.
John
__________________
Eugene, Oregon
Lucy's Limousine
1966 C-10 LWB
283 w/ 2bbl, OE carb and dist.
4 spd (granny 1st) w/ 3.73 rear end
AnlaufJohn is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:43 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com