MO WTB 3.73 rear end for 71-72 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ls1nova71 · 10-17-2013, 05:04 AM

Looking for a nice 3.73 coil spring rear end for a 71-72 half ton. Doesn't need to be a posi, but does need to be fairly clean, don't want to have to replace the brackets on it. Also only looking for local, with in the KC area.

ls1nova71 · 11-21-2013, 04:41 AM

Anybody reasonably close have anything? I would probably take any gear at this point. Also brakes are not important.

ls1nova71 · 11-26-2013, 08:10 AM

Ttt

ls1nova71 · 12-05-2013, 12:00 PM

There isn't a rear end in this city???

Ozark Tim · 12-06-2013, 05:29 PM

Hey man are you looking for the whole 3rd member? drum to drum?
I think I have a differential for a 3:73 but just the unit and spiders, no ring or pinion etc.
Did you check with Joe R. up in Independence? He has a lot of things.
Tim

ls1nova71 · 12-06-2013, 07:17 PM

I need a whole rear end, drum to drum, but since I'm putting discs on it I don't really need the drums. Lol! I've known joe forever, he doesn't have anything. We were talking the other day how it used to be you couldn't give away a 3:73 rear end since everybody wanted 3:07s, now they aren't anywhere to be found. BTW, the blazer I need it for used to be Joe's, I'm making it a 2wd.

ls1nova71 · 12-09-2013, 04:17 AM

Ttt

71GeneralMotorsCorp · 12-09-2013, 09:24 PM

ls1, I've got a rear end you might be interested in.. It's my spare but, I might part with it for the right price. 69-70 coil sprung rear with a posi carrier in it. Has brand new Richmond 3:73 gears in it that were installed 3,000 miles ago. But, still has the 6 lug axle shafts. Everything but the brakes were gone through 3,000 miles ago when the ring and pinion were put in..

ls1nova71 · 12-12-2013, 12:31 AM

Quote:

Originally Posted by 71GeneralMotorsCorp

ls1, I've got a rear end you might be interested in.. It's my spare but, I might part with it for the right price. 69-70 coil sprung rear with a posi carrier in it. Has brand new Richmond 3:73 gears in it that were installed 3,000 miles ago. But, still has the 6 lug axle shafts. Everything but the brakes were gone through 3,000 miles ago when the ring and pinion were put in..

Somewhere in 1970 I believe they changed axle length, and the 71-2 5 lug axles will fit in them. Can you get a backing plate to backing plate measurement? Also, what do you want for it?

ls1nova71 · 01-04-2014, 01:24 PM

So I took my 3:07 out of my short bed frame and had it rebuilt with a 3:73 posi, so I'm good to go on my current project. Still need another one to put back under the SB frame. Just needs to be 71-2 and 3:73 gear, non posi is fine.

**Clyde65** · 01-04-2014, 01:38 PM

They sure are getting hard to find in my neck of the woods also. Id like to have a spare just in case...

Low Elco · 01-21-2014, 10:26 AM

Does the guy in Lenexa have one? Also, look on C-list in Ark City, KS. A guy is selling a TON of stuff. Does Teeitup have one?

10-17-2013, 05:04 AM	#1
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,118	WTB 3.73 rear end for 71-72 Looking for a nice 3.73 coil spring rear end for a 71-72 half ton. Doesn't need to be a posi, but does need to be fairly clean, don't want to have to replace the brackets on it. Also only looking for local, with in the KC area. __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html Last edited by ls1nova71; 11-26-2013 at 08:15 AM.

11-21-2013, 04:41 AM	#2
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,118	Re: WTB 3.73 rear end for 71-72 Anybody reasonably close have anything? I would probably take any gear at this point. Also brakes are not important. __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

11-26-2013, 08:10 AM	#3
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,118	Re: WTB 3.73 rear end for 71-72 Ttt __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

12-05-2013, 12:00 PM	#4
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,118	Re: WTB 3.73 rear end for 71-72 There isn't a rear end in this city??? __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

12-06-2013, 05:29 PM	#5
Ozark Tim Registered User Join Date: Aug 2004 Location: Oakville, MO Posts: 1,018	Re: WTB 3.73 rear end for 71-72 Hey man are you looking for the whole 3rd member? drum to drum? I think I have a differential for a 3:73 but just the unit and spiders, no ring or pinion etc. Did you check with Joe R. up in Independence? He has a lot of things. Tim

12-06-2013, 07:17 PM	#6
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,118	Re: WTB 3.73 rear end for 71-72 I need a whole rear end, drum to drum, but since I'm putting discs on it I don't really need the drums. Lol! I've known joe forever, he doesn't have anything. We were talking the other day how it used to be you couldn't give away a 3:73 rear end since everybody wanted 3:07s, now they aren't anywhere to be found. BTW, the blazer I need it for used to be Joe's, I'm making it a 2wd. __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

12-09-2013, 04:17 AM	#7
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,118	Re: WTB 3.73 rear end for 71-72 Ttt __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

12-09-2013, 09:24 PM	#8
71GeneralMotorsCorp Registered User Join Date: Jul 2011 Location: Kansas Posts: 266	Re: WTB 3.73 rear end for 71-72 ls1, I've got a rear end you might be interested in.. It's my spare but, I might part with it for the right price. 69-70 coil sprung rear with a posi carrier in it. Has brand new Richmond 3:73 gears in it that were installed 3,000 miles ago. But, still has the 6 lug axle shafts. Everything but the brakes were gone through 3,000 miles ago when the ring and pinion were put in.. __________________ "Repetition penetrates even the dullest of minds"

01-04-2014, 01:24 PM	#10
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,118	Re: WTB 3.73 rear end for 71-72 So I took my 3:07 out of my short bed frame and had it rebuilt with a 3:73 posi, so I'm good to go on my current project. Still need another one to put back under the SB frame. Just needs to be 71-2 and 3:73 gear, non posi is fine. __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

01-04-2014, 01:38 PM	#11
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,545	Re: WTB 3.73 rear end for 71-72 They sure are getting hard to find in my neck of the woods also. Id like to have a spare just in case... __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

01-21-2014, 10:26 AM	#12
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: WTB 3.73 rear end for 71-72 Does the guy in Lenexa have one? Also, look on C-list in Ark City, KS. A guy is selling a TON of stuff. Does Teeitup have one? __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.