Wiring pigtails - The 1947 - Present Chevrolet & GMC Truck Message Board Network

blazer-k5 · 10-24-2013, 08:51 PM

Is there a site that still sells pigtails. I found that the reason my wires fried under the dash...from the looks it wanted to take the truck with it. The headlight switch basically melted to the connector. Should I concentrate on making my own? lol It wont be pretty.

blazer-k5 · 10-24-2013, 09:46 PM

The one between the fuse block and the dash itself. Possibly another part. Thanks I will check my pm to

cortcomp · 10-24-2013, 11:06 PM

Fuse block wires are hard wired into it on one side, and dash harness is a different harness. You can get the GM headlight switch from 100 different places. I did spade connectors (insulated) on one car and it's still great, but annoying because you have to figure out pinout.

blazer-k5 · 10-25-2013, 09:06 PM

Yea the hard wired part sucks i will have to clean it see what the damage is there. It isnt totally charred but questionable..

10-24-2013, 08:51 PM	#1
blazer-k5 Registered User Join Date: Jan 2003 Location: Mcloud,Ok Posts: 157	Wiring pigtails Is there a site that still sells pigtails. I found that the reason my wires fried under the dash...from the looks it wanted to take the truck with it. The headlight switch basically melted to the connector. Should I concentrate on making my own? lol It wont be pretty. __________________ No trees were killed to send this note but a large number of electrons were terribly inconvenienced. AKA. RABIDJOE... if you have to ask you prob don't want to know. Ive had my shots dont worry 1960 235 4SPD C30

10-24-2013, 09:46 PM	#2
blazer-k5 Registered User Join Date: Jan 2003 Location: Mcloud,Ok Posts: 157	Re: Wiring pigtails The one between the fuse block and the dash itself. Possibly another part. Thanks I will check my pm to __________________ No trees were killed to send this note but a large number of electrons were terribly inconvenienced. AKA. RABIDJOE... if you have to ask you prob don't want to know. Ive had my shots dont worry 1960 235 4SPD C30

10-24-2013, 11:06 PM	#3
cortcomp Registered User Join Date: Oct 2012 Location: cortland, oh Posts: 792	Re: Wiring pigtails Fuse block wires are hard wired into it on one side, and dash harness is a different harness. You can get the GM headlight switch from 100 different places. I did spade connectors (insulated) on one car and it's still great, but annoying because you have to figure out pinout. __________________ Project "i'm just going to clean up the interior and the engine bay": http://67-72chevytrucks.com/vboard/s...d.php?t=550931

10-25-2013, 09:06 PM	#4
blazer-k5 Registered User Join Date: Jan 2003 Location: Mcloud,Ok Posts: 157	Re: Wiring pigtails Yea the hard wired part sucks i will have to clean it see what the damage is there. It isnt totally charred but questionable.. __________________ No trees were killed to send this note but a large number of electrons were terribly inconvenienced. AKA. RABIDJOE... if you have to ask you prob don't want to know. Ive had my shots dont worry 1960 235 4SPD C30



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.