Let's see some pics of 4-6 and 5-7 drops on 71-72 c 10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

7d1truckguy · 10-29-2013, 10:10 PM

I want to get some idea's on if I want to go 4-6 or 5-7 on my 71 gmc with leaf springs on the rear I will probably keep these 15x8 ralley's until I can afford 20x8 and 20x10 torq thrust II

**68bowtie** · 10-29-2013, 10:55 PM

here's a good thread...

http://67-72chevytrucks.com/vboard/s...d.php?t=471442

**leddzepp** · 10-29-2013, 11:03 PM

5/7

**leddzepp** · 10-29-2013, 11:06 PM

Other side

67ctener · 10-29-2013, 11:09 PM

This should give you a good idea, very similar to what your lookin for

shopking72 · 10-29-2013, 11:49 PM

Rod Run · 10-30-2013, 12:14 AM

Are these drops just done with springs, or is there more to it so that you can still get a proper alignment after the drop?

**leddzepp** · 10-30-2013, 12:25 AM

2.5" dropped spindles in front (no change to geometry), combined with one cut coil on each original spring for another 2.5-3". Added one additional shim to each mounting point on the upper control arms. Aligned perfectly and drives straight down the road. 5" drop springs combined with 2" blocks in the rear.

**68bowtie** · 10-30-2013, 12:51 AM

Quote:

Originally Posted by leddzepp

2.5" dropped spindles in front (no change to geometry), combined with one cut coil on each original spring for another 2.5-3". Added one additional shim to each mounting point on the upper control arms. Aligned perfectly and drives straight down the road. 5" drop springs combined with 2" blocks in the rear.

i love the 5/7 look, especially with rally wheels and raised white letters. nice truck. you need frame mods for 7" right?

72BlckButy · 10-30-2013, 07:36 AM

4.5/6 ECE drop with NO c-notch installed.

Name: image.jpg
Views: 5618
Size: 101.8 KB

c10Dream'n · 10-30-2013, 09:11 AM

Installed the ECE kit a few months back. Total drop of 4/7 to even out the stance. Added a 1" lowering block in the rear. C-notch to follow.

17" TTII's w/ 255/55/17 on all 4 corners

**leddzepp** · 10-30-2013, 11:38 AM

Quote:

Originally Posted by 68bowtie

i love the 5/7 look, especially with rally wheels and raised white letters. nice truck. you need frame mods for 7" right?

Thanks. Yes you need to c-notch for clearance. Even with CPP 5" springs I bottomed out all the time and it needed then. Opinions and numbers seem to be all over the place as to when it is "required". I recommend installing the springs and using your own judgement.

NC_John · 10-30-2013, 12:28 PM

Quote:

Originally Posted by leddzepp

2.5" dropped spindles in front (no change to geometry), combined with one cut coil on each original spring for another 2.5-3". Added one additional shim to each mounting point on the upper control arms. Aligned perfectly and drives straight down the road. 5" drop springs combined with 2" blocks in the rear.

Looks wicked. How is your scrub line in the back with the 2" blocks and those wheels? I measured mine and best I could get before I starting hitting hard parts was 1.5" with blocks. 2" was really close.

**leddzepp** · 10-30-2013, 12:53 PM

I wouldn't go any lower than this with 15" wheels...it's very close!

sKnNyPpY · 10-30-2013, 12:57 PM

71 GMC 1500 with 2.5 CPP Spindles, 1" CCP Spring, DJM Flip Kit 5" FK1012-5 for 2.25" leaf spring. Supposedly 3.5/5 more like a 4/6. 20x8 OldSkool with 275/45 Falken Ziex TZ04. The front has settled a little more since these pics after doing the ball joints and getting the springs seated properly.

Name: IMAG2292.jpg
Views: 5000
Size: 56.1 KB

Name: IMAG2292.jpg
Views: 5000
Size: 56.1 KB

Name: TruckTunnel.jpg
Views: 5053
Size: 47.2 KB

Roger71SWB · 10-30-2013, 04:40 PM

Its not a 4-6 or 5-7 but here is a 6-8.

ksshane · 10-30-2013, 06:30 PM

Lowering mine this weekend. Ill post before and after pics when its done.

I know yellow isn't for everyone, but I really like that yellow.

JointTech · 10-30-2013, 08:43 PM

nice truck shopking. i havent seen that one around the forum for some reason.
72blackbeauty, roger, c10dreamin can you guys fit 20's? your stances are perfect.

**rgreathouse** · 11-04-2013, 12:49 PM

Shopking72 your truck looks great! What color is that gunmetal grey? Is it a chevy color?

c10Dream'n · 11-04-2013, 01:46 PM

Quote:

Originally Posted by JointTech

nice truck shopking. i havent seen that one around the forum for some reason.
72blackbeauty, roger, c10dreamin can you guys fit 20's? your stances are perfect.

I haven't got to that point yet of seeing if 20's would fit, but I dont see any reason they wouldn't. only thing i would have to take into consideration is tire sizes for front and rear.

c10Dream'n · 11-04-2013, 01:48 PM

Quote:

Originally Posted by Roger71SWB

Its not a 4-6 or 5-7 but here is a 6-8.

beautiful truck, interested on knowing what set up you got to get the 6-8. first time i've come across that set up. i was under the impression that anything after 5-7 needed to be bagged. thanks.

C/10 King · 11-04-2013, 01:53 PM

What the heck, one more 4.5/6 on Intro's Vista 20/22 combo.

Roger71SWB · 11-04-2013, 01:54 PM

I have 20x8 front and rear. Rear is 6" spring with 2" block

sublime1996525 · 11-04-2013, 02:41 PM

There are some sexy trucks here.

landsurvey1 · 11-04-2013, 03:15 PM

Here is mine with Boss 338 wheels, 20 x 8 front and 20 x 10s rear.

10-29-2013, 10:10 PM	#1
7d1truckguy Registered User Join Date: Jul 2013 Location: warren oregon Posts: 117	Let's see some pics of 4-6 and 5-7 drops on 71-72 c 10 I want to get some idea's on if I want to go 4-6 or 5-7 on my 71 gmc with leaf springs on the rear I will probably keep these 15x8 ralley's until I can afford 20x8 and 20x10 torq thrust II Attached Images

10-29-2013, 10:55 PM	#2
68bowtie Senior Member Join Date: Jan 2007 Location: Turlock, CA Posts: 8,795	Re: Let's see some pics of 4-6 and 5-7 drops on 71-72 c 10 here's a good thread... http://67-72chevytrucks.com/vboard/s...d.php?t=471442 __________________ Please help my sister in law with her battle with cancer https://gofund.me/902f6fce Project "C10 Fever" (68 factory black 396 swb) Project "Little Sister" (70 c10 blue original paint refresh) Project "Blue Bomb" (70 c30 blue original paint refresh) SOLD Project "Vitamin C" (71 c10 orange original paint refresh) SOLD

10-29-2013, 11:03 PM	#3
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,031	Re: Let's see some pics of 4-6 and 5-7 drops on 71-72 c 10 5/7 Attached Images __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul Last edited by leddzepp; 10-30-2013 at 12:33 AM.

10-29-2013, 11:06 PM	#4
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,031	Re: Let's see some pics of 4-6 and 5-7 drops on 71-72 c 10 Other side Attached Images __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

10-29-2013, 11:09 PM	#5
67ctener Registered User Join Date: Oct 2012 Location: Arlington Washington Posts: 1,808	Re: Let's see some pics of 4-6 and 5-7 drops on 71-72 c 10 This should give you a good idea, very similar to what your lookin for Attached Images __________________ Scott 67 c10 sold 89 c1500 90 k2500 91 s10 #chevyonly

10-29-2013, 11:49 PM	#6
shopking72 Registered User Join Date: Sep 2005 Location: Kansas Posts: 774	Re: Let's see some pics of 4-6 and 5-7 drops on 71-72 c 10 __________________ 1972 C10 LWB- 4.5 Front and 5 Rear Drop, 406/TH350 1966 Caprice 1968 Impala (Frame Off LSX Project) 2001 Tahoe LT 2013 Hyundai Elantra 2010 Kawasaki Z1000

10-30-2013, 12:14 AM	#7
Rod Run Registered User Join Date: Oct 2013 Location: Massachusetts Posts: 777	Re: Let's see some pics of 4-6 and 5-7 drops on 71-72 c 10 Are these drops just done with springs, or is there more to it so that you can still get a proper alignment after the drop? __________________ ______________________ www.northeastrodrun.com

10-30-2013, 12:25 AM	#8
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,031	Re: Let's see some pics of 4-6 and 5-7 drops on 71-72 c 10 2.5" dropped spindles in front (no change to geometry), combined with one cut coil on each original spring for another 2.5-3". Added one additional shim to each mounting point on the upper control arms. Aligned perfectly and drives straight down the road. 5" drop springs combined with 2" blocks in the rear. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

10-30-2013, 07:36 AM	#10
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Let's see some pics of 4-6 and 5-7 drops on 71-72 c 10 4.5/6 ECE drop with NO c-notch installed. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

10-30-2013, 09:11 AM	#11
c10Dream'n Registered User Join Date: Dec 2012 Location: San Diego Posts: 519	Re: Let's see some pics of 4-6 and 5-7 drops on 71-72 c 10 Installed the ECE kit a few months back. Total drop of 4/7 to even out the stance. Added a 1" lowering block in the rear. C-notch to follow. 17" TTII's w/ 255/55/17 on all 4 corners Attached Images

10-30-2013, 12:53 PM	#14
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,031	Re: Let's see some pics of 4-6 and 5-7 drops on 71-72 c 10 I wouldn't go any lower than this with 15" wheels...it's very close! __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

10-30-2013, 12:57 PM	#15
sKnNyPpY Registered User Join Date: Sep 2012 Location: Columbia, SC Posts: 549	Re: Let's see some pics of 4-6 and 5-7 drops on 71-72 c 10 71 GMC 1500 with 2.5 CPP Spindles, 1" CCP Spring, DJM Flip Kit 5" FK1012-5 for 2.25" leaf spring. Supposedly 3.5/5 more like a 4/6. 20x8 OldSkool with 275/45 Falken Ziex TZ04. The front has settled a little more since these pics after doing the ball joints and getting the springs seated properly. __________________ Life is too long to go slow... 71 GMC 1500 Super Custom LWB 350/350 AC(replaced w/vintage air)/PS/PB 2.5 CPP Spindle, 1" CPP Drop Spring, CPP Front and Rear Sway Bars/DJM Flip, new General Spring KC 5 spring pack, HEI /IntReg Alt 20x8.5 OldSkools 5" BS, 275/45 Falkens

10-30-2013, 04:40 PM	#16
Roger71SWB Registered User Join Date: Oct 2012 Location: vancouver washington Posts: 89	Re: Let's see some pics of 4-6 and 5-7 drops on 71-72 c 10 Its not a 4-6 or 5-7 but here is a 6-8. Attached Images

10-30-2013, 06:30 PM	#17
ksshane Registered User Join Date: Jul 2013 Location: Wichita Ks Posts: 495	Re: Let's see some pics of 4-6 and 5-7 drops on 71-72 c 10 Lowering mine this weekend. Ill post before and after pics when its done. I know yellow isn't for everyone, but I really like that yellow. __________________ 71 swb 350/4sp manual 5/7 static drop

10-30-2013, 08:43 PM	#18
JointTech Registered User Join Date: Feb 2012 Location: Mission Viejo, CA Posts: 1,856	Re: Let's see some pics of 4-6 and 5-7 drops on 71-72 c 10 nice truck shopking. i havent seen that one around the forum for some reason. 72blackbeauty, roger, c10dreamin can you guys fit 20's? your stances are perfect. __________________ 72 C20 Long Bed SB350 TH400 14 bolt rear end Extremely boring build thread



Register or Log In To remove these advertisements.

11-04-2013, 12:49 PM	#19
rgreathouse Registered User Join Date: Dec 2004 Location: jackson,ca Posts: 494	Re: Let's see some pics of 4-6 and 5-7 drops on 71-72 c 10 Shopking72 your truck looks great! What color is that gunmetal grey? Is it a chevy color? __________________ 1972 c10,2wd,long bed,250,4spd----> 1972 SWB Fleetside 4x4 12v Cummins build thread http://67-72chevytrucks.com/vboard/s...d.php?t=513791

11-04-2013, 01:53 PM	#22
C/10 King Registered User Join Date: Feb 2009 Location: A****er, CA Posts: 5,594	Re: Let's see some pics of 4-6 and 5-7 drops on 71-72 c 10 What the heck, one more 4.5/6 on Intro's Vista 20/22 combo. Attached Images __________________ C/10 Rene 1966 Short Fleet "The Hag" 1967 CST Short Fleet "Dark Poly" 1971 Short Fleet 1970 Jimmy Custom 2 WD "Golden Ticket" 1972 Blazer 2 WD "Retro Blaze"

11-04-2013, 01:54 PM	#23
Roger71SWB Registered User Join Date: Oct 2012 Location: vancouver washington Posts: 89	Re: Let's see some pics of 4-6 and 5-7 drops on 71-72 c 10 I have 20x8 front and rear. Rear is 6" spring with 2" block

11-04-2013, 02:41 PM	#24
sublime1996525 Registered User Join Date: Oct 2013 Location: Salt Lake City, UT Posts: 117	Re: Let's see some pics of 4-6 and 5-7 drops on 71-72 c 10 There are some sexy trucks here.

11-04-2013, 03:15 PM	#25
landsurvey1 Registered User Join Date: Jan 2009 Location: Arizona Posts: 404	Re: Let's see some pics of 4-6 and 5-7 drops on 71-72 c 10 Here is mine with Boss 338 wheels, 20 x 8 front and 20 x 10s rear. Attached Images __________________ 1972 Chevy short bed ZZ4 350/355hp GMPP crate engine. 1972 Cheyenne K-20 454/400hp big block 1988 Jeep Wrangler 2010 Jeep Sport Unlimited

Register or Log In To remove these advertisements.