GA WTB Rust free (or close) cab and doors - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**rob32472** · 11-18-2013, 09:27 PM

Looking for a really nice cab and doors for my next project. a/c or non, prefer a high hump but a low hump will work fine. I am ready to buy... Can pick up if close or will pay for shipping. Thanks

**rob32472** · 11-19-2013, 07:00 PM

Ttt

matt_field · 11-19-2013, 11:03 PM

I'm a ways away but I have a super clean 72 cab. Non ac low hump I'd maybe sell? It's in bare metal. One rocker has pin holes where weather striping goes, but that's it. I'm located in mn. Cab came from Las Vegas

**rob32472** · 11-19-2013, 11:07 PM

Pm sent

Putter · 11-20-2013, 09:51 AM

What do you call CLOSE??

PICKMUP · 11-20-2013, 04:07 PM

Do you want it with, or without the factory AM/FM radio?

mcbassin · 11-20-2013, 05:23 PM

Quote:

Originally Posted by PICKMUP

Do you want it with, or without the factory AM/FM radio?

That is a work of art! All original paint?

**rob32472** · 11-20-2013, 06:15 PM

Quote:

Originally Posted by PICKMUP

Do you want it with, or without the factory AM/FM radio?

With out! pm sent

PICKMUP · 11-20-2013, 10:23 PM

Quote:

Originally Posted by rob32472

With out! pm sent

CAB: (w/o doors, dash, column or AM/FM) = $1,200.
This is a Cheyenne with headliner, tall tunnel, AC, rear slider & cargo light.

DOORS: (w/o mirrors) = $900pr
No speaker holes, solid bottoms, "premium" wing windows (nice chrome & rubber).

One repaint outside-original inside.

I can't ship this. I can lift it to load on a truck. It has to be picked up here.

**rob32472** · 11-20-2013, 10:33 PM

I would you ship the doors?

67ctener · 11-20-2013, 11:20 PM

Wow frank I wish I never saw this... Now I need to come up with 1200

mcbassin · 11-21-2013, 12:07 AM

This is a very good deal. Anyone that has ever repaired one will tell you it won't take long to hit $1200 in labor

**rob32472** · 11-21-2013, 06:21 AM

Quote:

Originally Posted by mcbassin

This is a very good deal. Anyone that has ever repaired one will tell you it won't take long to hit $1200 in labor

I agree its just too far away for me to not have shipped.

**rob32472** · 11-21-2013, 06:22 AM

Quote:

Originally Posted by PICKMUP

CAB: (w/o doors, dash, column or AM/FM) = $1,200.
This is a Cheyenne with headliner, tall tunnel, AC, rear slider & cargo light.

DOORS: (w/o mirrors) = $900pr
No speaker holes, solid bottoms, "premium" wing windows (nice chrome & rubber).

One repaint outside-original inside.

I can't ship this. I can lift it to load on a truck. It has to be picked up here.

Pm sent

**70STOVEBOLT** · 11-21-2013, 11:35 AM

Quote:

Originally Posted by PICKMUP

CAB: (w/o doors, dash, column or AM/FM) = $1,200.
This is a Cheyenne with headliner, tall tunnel, AC, rear slider & cargo light.

DOORS: (w/o mirrors) = $900pr
No speaker holes, solid bottoms, "premium" wing windows (nice chrome & rubber).

One repaint outside-original inside.

I can't ship this. I can lift it to load on a truck. It has to be picked up here.

Frank, if you want sell those door panels let me know.

Thanks,
Mark

PICKMUP · 11-21-2013, 03:16 PM

Quote:

Originally Posted by rob32472

I would you ship the doors?

The doors will either ship on the cab (no crating hassle or separate charges) OR they will sell here/picked up locally. I gotta keep this "simple". thanks, frank

chevyguy_72 · 11-21-2013, 03:42 PM

All the nice cabs are on the other side of the country....

**rob32472** · 11-21-2013, 04:16 PM

Going to try and work out shipping on the cab frank pm sent

Number98 · 11-21-2013, 04:28 PM

Quote:

Originally Posted by rob32472

Going to try and work out shipping on the cab frank pm sent

If you need a transporter I know someone who is a car guy and knows how special this stuff is in Dallas, he brought me a Suburban from New Mexico to Atlanta a few years back. He can transport items like cabs as well. If your not in a hurry, he waits until he has a couple items in areas close together so he can maximize his trips, anyway if you want his info shoot me a PM.

Jason

chevyguy_72 · 11-21-2013, 07:32 PM

Quote:

Originally Posted by Number98

If you need a transporter I know someone who is a car guy and knows how special this stuff is in Dallas, he brought me a Suburban from New Mexico to Atlanta a few years back. He can transport items like cabs as well. If your not in a hurry, he waits until he has a couple items in areas close together so he can maximize his trips, anyway if you want his info shoot me a PM.

Jason

That being said I will have to be more open minded about parts on the other coast... do you have his info? could you pm me with it?
Thanks

IF you pass on Franks cab I would be interested depending on those shipping costs...

**rob32472** · 11-21-2013, 07:54 PM

Frank, I have shipping worked out... Pm sent

**rob32472** · 11-21-2013, 09:54 PM

Cab found! Thanks frank

67ctener · 11-21-2013, 10:12 PM

Quote:

Originally Posted by rob32472

Going to try and work out shipping on the cab frank pm sent

If your implying on this area you are VERY wrong I've looked at probably 50 and all need thousands in work. Frank struck gold with the one he found. If I had the money I wouldnt even question to go get that, cabs just aren't very nice anymore

PICKMUP · 11-26-2013, 04:07 PM

Quote:

Originally Posted by rob32472

Cab found! Thanks frank

...and it is shipped. thanks again, frank

mcbassin · 11-26-2013, 05:09 PM

Sweet deal! How much did shipping cost you?

11-18-2013, 09:27 PM	#1
rob32472 Registered User Join Date: May 2007 Location: dallas ga Posts: 1,505	WTB Rust free (or close) cab and doors Looking for a really nice cab and doors for my next project. a/c or non, prefer a high hump but a low hump will work fine. I am ready to buy... Can pick up if close or will pay for shipping. Thanks

11-19-2013, 07:00 PM	#2
rob32472 Registered User Join Date: May 2007 Location: dallas ga Posts: 1,505	Re: WTB Rust free (or close) cab and doors Ttt

11-19-2013, 11:03 PM	#3
matt_field Registered User Join Date: Apr 2001 Location: Detroit Lakes, Minnesota Posts: 885	Re: WTB Rust free (or close) cab and doors I'm a ways away but I have a super clean 72 cab. Non ac low hump I'd maybe sell? It's in bare metal. One rocker has pin holes where weather striping goes, but that's it. I'm located in mn. Cab came from Las Vegas __________________ 1971 k5 blazer 80k mike survivor 1972 3/4 ton 4wd Cummins 12v 1967 swb 2wd 427bbc 1968 4wd shortbox 1971 Cheyenne swb k10 unrestored 1971 Cheyenne super 40k 402bb survivor 1967 Chevy k10 (first truck) 1968 L78 camaro survivor 18k miles 1969 z28 survivor 60k miles 1969 z28 survivor 39k miles 1969 z28 rs survivor 80k miles

11-19-2013, 11:07 PM	#4
rob32472 Registered User Join Date: May 2007 Location: dallas ga Posts: 1,505	Re: WTB Rust free (or close) cab and doors Pm sent

11-20-2013, 09:51 AM	#5
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Re: WTB Rust free (or close) cab and doors What do you call CLOSE?? __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

11-20-2013, 04:07 PM	#6
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,143	Re: WTB Rust free (or close) cab and doors Do you want it with, or without the factory AM/FM radio? Attached Images __________________ Email: frankeham@comcast.net Phone: 360-956-7170

11-20-2013, 10:33 PM	#10
rob32472 Registered User Join Date: May 2007 Location: dallas ga Posts: 1,505	Re: WTB Rust free (or close) cab and doors I would you ship the doors?

11-20-2013, 11:20 PM	#11
67ctener Registered User Join Date: Oct 2012 Location: Arlington Washington Posts: 1,808	Re: WTB Rust free (or close) cab and doors Wow frank I wish I never saw this... Now I need to come up with 1200 __________________ Scott 67 c10 sold 89 c1500 90 k2500 91 s10 #chevyonly

11-21-2013, 12:07 AM	#12
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: WTB Rust free (or close) cab and doors This is a very good deal. Anyone that has ever repaired one will tell you it won't take long to hit $1200 in labor __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

11-21-2013, 03:42 PM	#17
chevyguy_72 Vintage Evil Join Date: Aug 2005 Location: Broomfield, CO Posts: 956	Re: WTB Rust free (or close) cab and doors All the nice cabs are on the other side of the country....

11-21-2013, 04:16 PM	#18
rob32472 Registered User Join Date: May 2007 Location: dallas ga Posts: 1,505	Re: WTB Rust free (or close) cab and doors Going to try and work out shipping on the cab frank pm sent

11-21-2013, 07:54 PM	#21
rob32472 Registered User Join Date: May 2007 Location: dallas ga Posts: 1,505	Re: WTB Rust free (or close) cab and doors Frank, I have shipping worked out... Pm sent

11-21-2013, 09:54 PM	#22
rob32472 Registered User Join Date: May 2007 Location: dallas ga Posts: 1,505	Re: WTB Rust free (or close) cab and doors Cab found! Thanks frank

11-26-2013, 05:09 PM	#25
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: WTB Rust free (or close) cab and doors Sweet deal! How much did shipping cost you? __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.