rear frame crossmember - The 1947 - Present Chevrolet & GMC Truck Message Board Network

69SWB4X4 · 11-28-2013, 11:50 AM

Looks like someone at one time hooked a tow chain to my rear crossmember. It is bent and rivets pulled out on one side. Does anyone have one?

**LockDoc** · 11-28-2013, 08:56 PM

-
Check the parts forum on here. I'm sure someone on there will be parting out a frame. You can't post a wanted to buy because your name is not blue (Premium Member) but if you see someone that is parting out a truck you can buy that piece from them.

LockDoc

mgkgmc · 11-28-2013, 11:39 PM

Check out Ece they have a replacement

69SWB4X4 · 11-29-2013, 12:40 AM

Thanks.. I will try the parts board. What is Ece?

cdowns · 11-29-2013, 01:38 PM

you can make your own that is either a scrap piece of c channel or a piece ofsquare tubing/// it is really a non critical piece as far as real structual rigid ity just square it up and tack weld in place measure for square again and then weld solid

mgkgmc · 11-29-2013, 03:17 PM

Sorry it's Early Classic Enterprises

11-28-2013, 11:50 AM	#1
69SWB4X4 Registered User Join Date: Oct 2013 Location: Oklahoma Posts: 54	rear frame crossmember Looks like someone at one time hooked a tow chain to my rear crossmember. It is bent and rivets pulled out on one side. Does anyone have one?

11-28-2013, 08:56 PM	#2
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,394	Re: rear frame crossmember - Check the parts forum on here. I'm sure someone on there will be parting out a frame. You can't post a wanted to buy because your name is not blue (Premium Member) but if you see someone that is parting out a truck you can buy that piece from them. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

11-28-2013, 11:39 PM	#3
mgkgmc Registered User Join Date: Dec 2007 Location: Glendale Arizona Posts: 1,354	Re: rear frame crossmember Check out Ece they have a replacement __________________ 1970 GMC 1500 stepside 1972 GMC Jimmy Custom 2004 Chevy Colorado 1989 Swb Silverado 1972 Aj's Stormer

11-29-2013, 12:40 AM	#4
69SWB4X4 Registered User Join Date: Oct 2013 Location: Oklahoma Posts: 54	Re: rear frame crossmember Thanks.. I will try the parts board. What is Ece?

11-29-2013, 01:38 PM	#5
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: rear frame crossmember you can make your own that is either a scrap piece of c channel or a piece ofsquare tubing/// it is really a non critical piece as far as real structual rigid ity just square it up and tack weld in place measure for square again and then weld solid __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

11-29-2013, 03:17 PM	#6
mgkgmc Registered User Join Date: Dec 2007 Location: Glendale Arizona Posts: 1,354	Re: rear frame crossmember Sorry it's Early Classic Enterprises __________________ 1970 GMC 1500 stepside 1972 GMC Jimmy Custom 2004 Chevy Colorado 1989 Swb Silverado 1972 Aj's Stormer



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.