FS: Holley 1460 600cfm vac. secondary, elec. choke - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Destructo · 12-17-2003, 12:57 AM

I am putting a Q-Jet on my 4x4 for better mileage and to help cure the fuel slosh problem with off-roading and my holley, I won't be needing this holley anymore so its up for grabs. It is not very old and is the polished model although its not so shiny anymore but could be polished back up with a little elbow grease

. Also included for an extra 15 bucks is the special bracket need for the throttle and TV cable for a 700r4 transmission to line up properly with the throttle linkage. This bracket bolts up with the back drive side corner bolt so no matter hot big a spacer your running everything will still line up. As the title says this is a 600cfm vacuum secondary carb with electric choke, model 1460 and it is new enough to have the power valve blow-out protection. Ran perfect on my truck, no problems what so-ever, and the engine in my truck is a 350, started right up no problems in the morning.

125 bucks plus ride plus 10 bucks if you want the 700r4 bracket (will work for TH350 also). I have been using the bracket with my 700r4 for over 2k miles and has allowed the transmission to shift perfectly. The brackets are also available at Advance Autos, just ask for the holley book and its in there.

Pictures are available, give me your email and i'll send them to you. PM me, email me, or post here with any questions.

Also open to trades for wheels and or tires (35x12.5x15's) need 15x8 6 lug wheels, will take stock truck ralley wheels if you have all the peices.

Destructo · 12-31-2003, 12:46 AM

125 including bracket + ride, its a good deal! You know you need a holley!

Old Chevy Lover · 12-31-2003, 08:58 AM

How did you know I needed a Holley? But I need one for less money...

Destructo · 12-31-2003, 09:42 AM

I got a manual choke holley that could probably use a rebuild but ran last time I had it on a truck.... You can have it for less hehe.

Old Chevy Lover · 12-31-2003, 10:17 AM

how much less? manual choke.. rebuild... translated that means you'd practically give it away???? hahahahaha

Destructo · 12-31-2003, 02:36 PM

Make me an offer, its not worth much but its in pretty good shape, non-shiny model though.

Old Chevy Lover · 12-31-2003, 04:07 PM

what's the model number on it?

Destructo · 12-31-2003, 04:22 PM

0-1850C or in other words a 1460.

Destructo · 01-03-2004, 01:05 AM

Bump, still for sale.

Old Chevy Lover · 01-04-2004, 02:32 AM

Destructo.. you figure out what you'd take for that old, beat up Holley that needs rebuilt yet???

12-17-2003, 12:57 AM	#1
Destructo Registered User Join Date: Sep 2003 Location: Lewisville, NC Posts: 1,836	FS: Holley 1460 600cfm vac. secondary, elec. choke I am putting a Q-Jet on my 4x4 for better mileage and to help cure the fuel slosh problem with off-roading and my holley, I won't be needing this holley anymore so its up for grabs. It is not very old and is the polished model although its not so shiny anymore but could be polished back up with a little elbow grease . Also included for an extra 15 bucks is the special bracket need for the throttle and TV cable for a 700r4 transmission to line up properly with the throttle linkage. This bracket bolts up with the back drive side corner bolt so no matter hot big a spacer your running everything will still line up. As the title says this is a 600cfm vacuum secondary carb with electric choke, model 1460 and it is new enough to have the power valve blow-out protection. Ran perfect on my truck, no problems what so-ever, and the engine in my truck is a 350, started right up no problems in the morning. 125 bucks plus ride plus 10 bucks if you want the 700r4 bracket (will work for TH350 also). I have been using the bracket with my 700r4 for over 2k miles and has allowed the transmission to shift perfectly. The brackets are also available at Advance Autos, just ask for the holley book and its in there. Pictures are available, give me your email and i'll send them to you. PM me, email me, or post here with any questions. Also open to trades for wheels and or tires (35x12.5x15's) need 15x8 6 lug wheels, will take stock truck ralley wheels if you have all the peices. Last edited by Destructo; 12-17-2003 at 12:59 AM.

12-31-2003, 08:58 AM	#3
Old Chevy Lover Registered User Join Date: Dec 2002 Location: Chillicothe OHIO Posts: 717	How did you know I needed a Holley? But I need one for less money... __________________ Keith 70 Chevelle Malibu SS Clone 468/Auto 72 C10 SWB 350/Auto 13 Camaro SS/RS 6.2/Auto

12-31-2003, 10:17 AM	#5
Old Chevy Lover Registered User Join Date: Dec 2002 Location: Chillicothe OHIO Posts: 717	how much less? manual choke.. rebuild... translated that means you'd practically give it away???? hahahahaha __________________ Keith 70 Chevelle Malibu SS Clone 468/Auto 72 C10 SWB 350/Auto 13 Camaro SS/RS 6.2/Auto

12-31-2003, 04:07 PM	#7
Old Chevy Lover Registered User Join Date: Dec 2002 Location: Chillicothe OHIO Posts: 717	what's the model number on it? __________________ Keith 70 Chevelle Malibu SS Clone 468/Auto 72 C10 SWB 350/Auto 13 Camaro SS/RS 6.2/Auto

01-04-2004, 02:32 AM	#10
Old Chevy Lover Registered User Join Date: Dec 2002 Location: Chillicothe OHIO Posts: 717	Destructo.. you figure out what you'd take for that old, beat up Holley that needs rebuilt yet??? __________________ Keith 70 Chevelle Malibu SS Clone 468/Auto 72 C10 SWB 350/Auto 13 Camaro SS/RS 6.2/Auto

12-31-2003, 12:46 AM	#2
Destructo Registered User Join Date: Sep 2003 Location: Lewisville, NC Posts: 1,836	125 including bracket + ride, its a good deal! You know you need a holley!

12-31-2003, 09:42 AM	#4
Destructo Registered User Join Date: Sep 2003 Location: Lewisville, NC Posts: 1,836	I got a manual choke holley that could probably use a rebuild but ran last time I had it on a truck.... You can have it for less hehe.

12-31-2003, 02:36 PM	#6
Destructo Registered User Join Date: Sep 2003 Location: Lewisville, NC Posts: 1,836	Make me an offer, its not worth much but its in pretty good shape, non-shiny model though.

12-31-2003, 04:22 PM	#8
Destructo Registered User Join Date: Sep 2003 Location: Lewisville, NC Posts: 1,836	0-1850C or in other words a 1460.

01-03-2004, 01:05 AM	#9
Destructo Registered User Join Date: Sep 2003 Location: Lewisville, NC Posts: 1,836	Bump, still for sale.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.