|
12-19-2013, 03:32 PM
|
#1 |
|
Registered User
Join Date: Nov 2010
Location: Rustville USA or southeast Ia
Posts: 654
|
Blown head gasket?
I think i may have a blown head gasket, I have water in my oil.. and it looks like some smoke around my passenger side exhaust manifold.. I haven't really paid attention to the coolant since i haven't driven it since the motor swap.
__________________
Rust is better than rice. 
|
|
|
|
12-19-2013, 05:06 PM
|
#2 |
|
Registered User
Join Date: Dec 2008
Location: Foristell, MO
Posts: 418
|
Re: Blown head gasket?
Check your plugs and coolant but I'm going to agree it's blown or cracked. Only oil should be in oil
|
|
|
|
|
12-20-2013, 05:42 PM
|
#3 |
|
Registered User
Join Date: Nov 2010
Location: Rustville USA or southeast Ia
Posts: 654
|
Re: Blown head gasket?
So it's the middle of winter and i don't have a garage... i can't leave it like this though can i won't water in the oil cause rust?
__________________
Rust is better than rice.
|
|
|
|
|
12-20-2013, 06:10 PM
|
#4 |
|
Registered User
Join Date: Aug 2012
Location: Oklahoma City, OK
Posts: 2,658
|
Re: Blown head gasket?
Drain all of the coolant including the 2 lower block plugs. Drain and replace the oil and filter. Use cheap oil. It isn't going to see much use. Don't add any coolant back. Start and idle just a few seconds longer than it takes to get full oil pressure then turn off. Should be good until better weather.
|
|
|
|
|
12-28-2013, 04:11 PM
|
#5 |
|
Registered User
Join Date: Nov 2010
Location: Rustville USA or southeast Ia
Posts: 654
|
Re: Blown head gasket?
do you have a picture of the block plugs i'm not sure exactly what they look like.
__________________
Rust is better than rice.
|
|
|
|
|
12-28-2013, 08:23 PM
|
#6 |
|
Registered User
Join Date: Jul 2011
Location: WV
Posts: 946
|
Re: Blown head gasket?
They are just above the oil pan rail about half way back the block. Usually 1/2 or 9/16 hex head.
__________________
72 GMC C2500 402/Th400 first truck (still have) 77 GMC C3500 CC dually Sold  70 C50 dump truck "Rusty" 87 K10 Suburban Sold 93 K2500 xcab 6.5TD 96 GMC K2500 Suburban 6.5 TD |
|
|
|
|
12-29-2013, 04:06 AM
|
#7 |
|
Registered User
Join Date: Nov 2010
Location: Rustville USA or southeast Ia
Posts: 654
|
Re: Blown head gasket?
those probably aren't coming out then... I tried to remove some for my knock sensor and oil pressure switch and they are stuck good.
__________________
Rust is better than rice.
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
