Project G-TR, Gearbox Garage Shop Truck - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

nibs · 12-27-2013, 08:56 PM

Thats a cherry paint job! Cant wait to see it all put together

wickedred · 12-28-2013, 01:31 AM

Nice Looking Project.

GEARBOXGARAGE · 12-30-2013, 09:56 AM

Been putting in a few late nights with the wiring and plumbing.... Using a Painless harness and various other items sourced from Waytek Wire ( http://www.waytekwire.com/products/ ). If you need specialty wiring components, this is the place to get it! For fuel lines, I'm running Fragola fittings and black nylon braided race hose. The Aeromotive Phantom system is in place, and came out great. I highly recommend these to anyone wanting a quality fuel system.

**youngrodder** · 12-30-2013, 10:55 AM

Looks good Mike...Keep it up.

Marc

GEARBOXGARAGE · 12-30-2013, 12:59 PM

Thanks, Marc. It's kind of hard to get excited about wiring and plumbing... a little on the tedious side, but as I'm sure you know, it's small details like this that can make or break a high quality build. I'm going the extra mile to solder any new connections and sealing them up with heat shrink. Adds a lot of time, but worth it. I'll post some more pics when I get back to the fun stuff.

**Palf70Step** · 12-30-2013, 02:08 PM

Wiring can sure test your patience. Truck is really coming together.

gdavis · 01-02-2014, 07:31 PM

I really like th alt I got from you. It'll look sweet when I install it. For now it is on a shelf along with a lot of other parts. I am waiting for the rain to stop.

GEARBOXGARAGE · 01-07-2014, 01:24 PM

Finished up some more of the plumbing this past weekend. Been busy with snow removal the last couple of days and trying to stay warm. Thermometer said -13 this morning and the weatherman says a -40 windchill! Heard on the radio that most of the Midwest has been colder than Siberia and every state except Hawaii saw freezing temps yesterday. Well that's enough of the weather report. I'll be getting the engine and trans ready to drop in soon. Stay tuned...

BugzC10 · 01-07-2014, 04:08 PM

Thanks for sending me the link to your build....it is going to be one sweet ride when you're done.

I can't help think, what are you going to do with all that free time when you're done?

GEARBOXGARAGE · 01-08-2014, 09:42 AM

Quote:

Originally Posted by BugzC10

Thanks for sending me the link to your build....it is going to be one sweet ride when your done.

I can't help think, what are you going to do with all that free time when your done?

Unfortunately, I promised my wife that it will be her turn to spend some money... DOH! I'll be busy putitng an addition on the house and remodeling the kitchen. But after that, I'm hoping build a bigger shop and find a solid Chevelle to restore. I'm thinking of doing a clone LS6, but use an LSx 454 and a Tremec 6 speed with full Detroit Speed suspension. But, at this point, it's just a day dream.

aggie91 · 01-08-2014, 11:22 AM

Mike

The truck is looking good. I think the color choice is spot on and he did a great job on the bodywork and paint. How are things at Burr Oak? Since I am out of the coil industry now, I don't hear from them guys anymore...

GEARBOXGARAGE · 01-09-2014, 12:44 PM

Quote:

Originally Posted by aggie91

Mike

The truck is looking good. I think the color choice is spot on and he did a great job on the bodywork and paint. How are things at Burr Oak? Since I am out of the coil industry now, I don't hear from them guys anymore...

Karl,

Good to hear from you, again. Thanks for the support. Burr Oak has been pretty busy. We've released a newly designed hairpin bender and they are doing really well. They have a youtube video of it if you want to check it out (

NEW Electric Hairpin Bender from Burr Oak Tool -...

)

GEARBOXGARAGE · 01-11-2014, 11:46 AM

The Aeromotive Phantom pump is wired and plumbed. Just have to finish the wiring on the sending unit and add some ground leads and the back will be ready to mount the bed. The factory cargo light housing was retained, except it will be wired as a third brake light with a red LED bulb.

GEARBOXGARAGE · 01-16-2014, 11:24 PM

Not much progress this week. I ordered a few L.E.D. bulbs for the front park/turn signals, reverse lights, and for the 3rd brake light. Should be back on it this weekend for some more wiring action and prepping the engine and trans for the final install.

GEARBOXGARAGE · 01-20-2014, 09:04 PM

Not a really great pic, but the 3rd Brake Light works as planned. Spent some time finishing off the Hushmat with seam tape. Just about through the tedious stuff. It'll be nice to put some time in and be able to see a noticeable difference...

orngsikL · 01-20-2014, 10:01 PM

sweet build!

Z10 · 01-21-2014, 01:06 AM

Very nice!

GEARBOXGARAGE · 01-27-2014, 03:44 PM

Starting some work on the core support. Getting a few of the A/C lines in and the condesor. Did a little more on finalizing the wiring and brake lines, just have to finish the stretch from the master cylinder to the frame rail. I'll be getting the inner fenders mounted soon and dropping the engine/trans in.

BugzC10 · 01-27-2014, 03:51 PM

Who's AC system did you go with Mike?

GEARBOXGARAGE · 01-27-2014, 07:18 PM

Quote:

Originally Posted by BugzC10

Who's AC system did you go with Mike?

The condenser was sourced from Early Classic Enterprises, but the remaining components are from Vintage Air. I used the standard Parker hose with crimp-on ends. If I were to do it again, I'd use the Eaton EZClip System, which is also available from Vintage Air through The Gearbox Garage. (Here's a link to a youtube video of the EZClip Systme) http://www.youtube.com/watch?v=RAXHb...ature=youtu.be

Bennett68C10 · 01-28-2014, 09:20 AM

Awesome build, subscribed to see it finished

GEARBOXGARAGE · 02-16-2014, 09:23 AM

Finally got to put some time in on the '71 C10 this weekend. Installed the inner fenders and tied up a few loose ends. Set the front tire in place to get a visual. It'll be a lot lower when its back on the ground and the engine is in.

BossHogg69 · 02-16-2014, 09:48 AM

Paint looks killer as is the rest of the build. Great color choice - it's gonna be one

of a ride when you're finished!

BugzC10 · 02-16-2014, 09:57 AM

Whoa.....starting to look like a truck again. It' gonna look sweet sittin on those wheels.

cafetony · 02-16-2014, 02:49 PM

really nice,
your giving me some nice ways to lay my wires

12-27-2013, 08:56 PM	#51
nibs JRods Garage Join Date: Dec 2009 Location: East Highland, CA Posts: 1,098	Re: Project G-TR, Gearbox Garage Shop Truck Thats a cherry paint job! Cant wait to see it all put together __________________ Orange Julius-My dropmember'd, LS'd, SWB street machine...

12-28-2013, 01:31 AM	#52
wickedred Registered User Join Date: Mar 2005 Location: Bowling Green kY Posts: 54	Re: Project G-TR, Gearbox Garage Shop Truck Nice Looking Project. __________________ 1984 K5 Blazer 4x4. Because my daily driver needs to be a project too... 1971 C10. Auto Cross/Pro Touring Build. Project : I am gonna go broke with this one. 1970 Chevy LWB 4x4. 355, 4spd, Dana 44 front, Dana 60 rear, 35x12.50 tires... STOLEN I will put a Turbo on anything with an engine if the $$$ is right. *Once upon a time....*

12-30-2013, 09:56 AM	#53
GEARBOXGARAGE Registered User Join Date: Sep 2011 Location: Sturgis, Michigan Posts: 509	Re: Project G-TR, Gearbox Garage Shop Truck Been putting in a few late nights with the wiring and plumbing.... Using a Painless harness and various other items sourced from Waytek Wire ( http://www.waytekwire.com/products/ ). If you need specialty wiring components, this is the place to get it! For fuel lines, I'm running Fragola fittings and black nylon braided race hose. The Aeromotive Phantom system is in place, and came out great. I highly recommend these to anyone wanting a quality fuel system. Attached Images

12-30-2013, 10:55 AM	#54
youngrodder Registered User Join Date: Mar 2007 Location: Scotts, Michigan Posts: 3,774	Re: Project G-TR, Gearbox Garage Shop Truck Looks good Mike...Keep it up. Marc __________________ …………...........__________ .................. ((__\|__\|\|___\____ ..;.;;.:;:;.,;..;((_(O))____ (_(O)) 1948 Chevy Truck - Finished SOLD!! 1953 Chevy Suburban "Family Truckster" Completed: Spring of 2021 http://67-72chevytrucks.com/vboard/s...d.php?t=605484 1994 4x4 Blazer - "Field Find" https://67-72chevytrucks.com/vboard/...ferrerid=30857

12-30-2013, 12:59 PM	#55
GEARBOXGARAGE Registered User Join Date: Sep 2011 Location: Sturgis, Michigan Posts: 509	Re: Project G-TR, Gearbox Garage Shop Truck Thanks, Marc. It's kind of hard to get excited about wiring and plumbing... a little on the tedious side, but as I'm sure you know, it's small details like this that can make or break a high quality build. I'm going the extra mile to solder any new connections and sealing them up with heat shrink. Adds a lot of time, but worth it. I'll post some more pics when I get back to the fun stuff.

12-30-2013, 02:08 PM	#56
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,216	Re: Project G-TR, Gearbox Garage Shop Truck Wiring can sure test your patience. Truck is really coming together. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

01-02-2014, 07:31 PM	#57
gdavis Registered User Join Date: Aug 2012 Location: Homosassa, Fl. Posts: 2,965	Re: Project G-TR, Gearbox Garage Shop Truck I really like th alt I got from you. It'll look sweet when I install it. For now it is on a shelf along with a lot of other parts. I am waiting for the rain to stop. __________________ Check out Patches Cars I owned in the past. 1962 chev II Nova - 1965 Chevelle SS - (2)1966 Chevelle SS 1965 chev C10 57 belair chev 1967 Chevelle SS - 1969 Chevelle SS - 1972 Chevelle SS 1967 Buick electra 225 1995 Harley Davidson bager What does not kill you will make you stronger 1968 c10 short wheel base stepper

01-07-2014, 01:24 PM	#58
GEARBOXGARAGE Registered User Join Date: Sep 2011 Location: Sturgis, Michigan Posts: 509	Re: Project G-TR, Gearbox Garage Shop Truck Finished up some more of the plumbing this past weekend. Been busy with snow removal the last couple of days and trying to stay warm. Thermometer said -13 this morning and the weatherman says a -40 windchill! Heard on the radio that most of the Midwest has been colder than Siberia and every state except Hawaii saw freezing temps yesterday. Well that's enough of the weather report. I'll be getting the engine and trans ready to drop in soon. Stay tuned...

01-07-2014, 04:08 PM	#59
BugzC10 Registered User Join Date: Oct 2012 Location: Rose Hill Kansas Posts: 1,351	Re: Project G-TR, Gearbox Garage Shop Truck Thanks for sending me the link to your build....it is going to be one sweet ride when you're done. I can't help think, what are you going to do with all that free time when you're done? __________________ 1970 C10 Short Stepper with 71/72 front clip. Last edited by BugzC10; 01-08-2014 at 10:56 AM.

01-08-2014, 11:22 AM	#61
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: Project G-TR, Gearbox Garage Shop Truck Mike The truck is looking good. I think the color choice is spot on and he did a great job on the bodywork and paint. How are things at Burr Oak? Since I am out of the coil industry now, I don't hear from them guys anymore... __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

01-11-2014, 11:46 AM	#63
GEARBOXGARAGE Registered User Join Date: Sep 2011 Location: Sturgis, Michigan Posts: 509	Re: Project G-TR, Gearbox Garage Shop Truck The Aeromotive Phantom pump is wired and plumbed. Just have to finish the wiring on the sending unit and add some ground leads and the back will be ready to mount the bed. The factory cargo light housing was retained, except it will be wired as a third brake light with a red LED bulb. Attached Images

01-16-2014, 11:24 PM	#64
GEARBOXGARAGE Registered User Join Date: Sep 2011 Location: Sturgis, Michigan Posts: 509	Re: Project G-TR, Gearbox Garage Shop Truck Not much progress this week. I ordered a few L.E.D. bulbs for the front park/turn signals, reverse lights, and for the 3rd brake light. Should be back on it this weekend for some more wiring action and prepping the engine and trans for the final install.

01-20-2014, 09:04 PM	#65
GEARBOXGARAGE Registered User Join Date: Sep 2011 Location: Sturgis, Michigan Posts: 509	Re: Project G-TR, Gearbox Garage Shop Truck Not a really great pic, but the 3rd Brake Light works as planned. Spent some time finishing off the Hushmat with seam tape. Just about through the tedious stuff. It'll be nice to put some time in and be able to see a noticeable difference... Attached Images

01-20-2014, 10:01 PM	#66
orngsikL Registered User Join Date: Oct 2011 Location: Watson, Louisiana Posts: 312	Re: Project G-TR, Gearbox Garage Shop Truck sweet build! __________________ build thread - 1972 C/10 "Ethyl" 1974 C/10 " Paw Paw" C/10 Club Louisiana instagram - @esso_c10 @projectpawpaw

01-21-2014, 01:06 AM	#67
Z10 Registered User Join Date: Aug 2012 Location: Midland, TX Posts: 1,267	Re: Project G-TR, Gearbox Garage Shop Truck Very nice! __________________ 1969 RS/SS Z10 Camaro Pace coupe 1972 GMC Short Step buildhttp://67-72chevytrucks.com/vboard/s...=1#post6356218 1979 Mazda RX7 1979 Pontiac Trans Am WS6 & 1979 Pontiac Trans Am 10th Anniversary 1999 Honda Valkyrie 2006 Corvette Z06 2010 BMW 650i



Register or Log In To remove these advertisements.

01-27-2014, 03:44 PM	#68
GEARBOXGARAGE Registered User Join Date: Sep 2011 Location: Sturgis, Michigan Posts: 509	Re: Project G-TR, Gearbox Garage Shop Truck Starting some work on the core support. Getting a few of the A/C lines in and the condesor. Did a little more on finalizing the wiring and brake lines, just have to finish the stretch from the master cylinder to the frame rail. I'll be getting the inner fenders mounted soon and dropping the engine/trans in. Attached Images

01-27-2014, 03:51 PM	#69
BugzC10 Registered User Join Date: Oct 2012 Location: Rose Hill Kansas Posts: 1,351	Re: Project G-TR, Gearbox Garage Shop Truck Who's AC system did you go with Mike? __________________ 1970 C10 Short Stepper with 71/72 front clip.

01-28-2014, 09:20 AM	#71
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Project G-TR, Gearbox Garage Shop Truck Awesome build, subscribed to see it finished __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

02-16-2014, 09:23 AM	#72
GEARBOXGARAGE Registered User Join Date: Sep 2011 Location: Sturgis, Michigan Posts: 509	Re: Project G-TR, Gearbox Garage Shop Truck Finally got to put some time in on the '71 C10 this weekend. Installed the inner fenders and tied up a few loose ends. Set the front tire in place to get a visual. It'll be a lot lower when its back on the ground and the engine is in. Attached Images

02-16-2014, 09:48 AM	#73
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: Project G-TR, Gearbox Garage Shop Truck Paint looks killer as is the rest of the build. Great color choice - it's gonna be one of a ride when you're finished! __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!

02-16-2014, 09:57 AM	#74
BugzC10 Registered User Join Date: Oct 2012 Location: Rose Hill Kansas Posts: 1,351	Re: Project G-TR, Gearbox Garage Shop Truck Whoa.....starting to look like a truck again. It' gonna look sweet sittin on those wheels. __________________ 1970 C10 Short Stepper with 71/72 front clip.

02-16-2014, 02:49 PM	#75
cafetony Registered User Join Date: Aug 2013 Location: centralia wa Posts: 118	Re: Project G-TR, Gearbox Garage Shop Truck really nice, your giving me some nice ways to lay my wires

Register or Log In To remove these advertisements.