Repro and nos stuff that is left!!!! - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

pickupman · 12-19-2003, 11:23 PM

Randy, Iwill get back with you tomorrow. I will have to check the #'s. They Look familar. I will probably take them.
Thanks, Bill

blazer1971 · 12-19-2003, 11:37 PM

$$? for a windshield wiper switch and knob for 1972 to 33572

**seacrow** · 12-19-2003, 11:54 PM

Randy, put me down for some door edge guards.

teeitup · 12-19-2003, 11:59 PM

Bruce, I mailed your dash out today, I'm not sure how close the color is for sure on the visors, these are new, no arms in them $45 pair
Bill, sounds good
blazer1971, none of those
Thanks Randy

*Don Loverink* · 12-20-2003, 01:19 AM

Randy, I need a set of your door edge guards and the brown defrost covers if you still have them, send me a pm, thanks, Don

meathead95 · 12-20-2003, 11:33 AM

prices please for the following
center vent
drivers side rear bumper bracket for a 2wd blazer
whats all the new wiring for? is it nos? do you have a completes set of nos wiring for a 72 swb 4x4 with a/c
how much for the sway bar bushing set? will it fit the factory sway bar on my 72 2wd blazer?
whats the firewall pad for a/c or non a/c trucks? is their a difference?

teeitup · 12-20-2003, 02:12 PM

NOS Center vent $20
Bracket don't know what this one is for
I have 3 engine wiring harnesses and one harness for under hood wiring harness for lights and altenator, aftermarket. No under dash wiring harnesses. I have 2 sets of lwb rear wiring harnesses for taillights the one that goes from cab to rear of truck.
Sway bar bushing $25 set, its for factory sway bars
Firewall pad is the the pads for center and left side $35, you have to buy the third pad for the right depending on what you have ac or not, is what I was told. Thanks Randy

meathead95 · 12-20-2003, 04:02 PM

i pm'd you

Tx Firefighter · 12-20-2003, 06:14 PM

PM sent

teeitup · 12-20-2003, 06:24 PM

Back at ya both.

**too much stuff** · 12-21-2003, 12:29 AM

Randy, any wiring from rear crossmember out to taillights?

ZOOMY · 12-21-2003, 01:09 AM

Randy, I need a total of 2 sets of 67-68 chrome or polished headlight bezels. I can't remember if I had you set a pair aside or not.......Thanks.......Zoomy

teeitup · 12-21-2003, 01:15 AM

Dave, I got one set of New reproduction ones for $50, I'll set them back, Thanks Randy

llama · 12-21-2003, 09:28 AM

randy

how much for 1 under hood, 1 engine, and 1 lwb rear wiring harnesses?

6772king · 12-21-2003, 11:29 AM

looking for 71-72 disk brake front brake hose also rear e-brake cables for 72 jimmy 2wd with coil sprung rear ( I think they are all the same as long as they are for coil springs) thanks Sean

teeitup · 12-21-2003, 11:47 AM

Jeff, I have a engine harness left for $25, lwb rear wiring for $25 sold the under hood front wiring already.
Sean, sorry none of those
Thanks Randy

Tx Firefighter · 12-21-2003, 12:22 PM

Randy, PM sent to you

SWINGSAX68 · 12-21-2003, 08:23 PM

Hey randy,
How much for the bezel, what years you got...looking fr a 67-68 w/gauges.
also how much for the tail wireing harness???

teeitup · 12-21-2003, 09:04 PM

Roger, I got bezels 67-68 for $25, and the wiring harness for cab to end of truck taillight wiring is $25 all plus shipping. Thanks Randy

teeitup · 12-21-2003, 11:08 PM

All NOS cables are sold, NOS door sill plates are sold. Thanks Randy

**BAD4X4** · 12-21-2003, 11:30 PM

Randy do you have the intermediate tail light wire harness for a shortbed goes from firewall to tail light harness, also need tail light harness with working marker lenz, shipping to 97702 thanx Dana

GMNUT · 12-21-2003, 11:32 PM

need orange clearance lites , what is fair for 5 of them zip is 98390

teeitup · 12-21-2003, 11:38 PM

Dana, only wiring for a lwb, sorry no tailight harnesses.
GMNUT, sold both sets already
Thanks Randy

Cethern · 12-25-2003, 09:33 PM

Hello Randy

I see in pic #15 you have a Alum. Oil pan that looks like a SBC
is that up for sale and if so How much? I also saw some else you had a set M/T's what would you be asking for those?

Now I wanted to asked you out of all the wheels you have have seen a 15x8 6 lug Slotted Mag?

Thanks for your time.

Oh run out your way a lot do you mind if a guys stops to drool for a little bit? And lastly is there room for a big truck to park near by?

Cethern

teeitup · 12-25-2003, 10:54 PM

I priced the sb oil pan for a $100 but had no interest so how about $80, I sold the MT covers already. I have a set of 6 lug mags but I think they came off a newer truck. You can stop by and yes there is a place to park a big truck close.
Thanks Randy

12-19-2003, 11:23 PM	#26
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,095	Randy, Iwill get back with you tomorrow. I will have to check the #'s. They Look familar. I will probably take them. Thanks, Bill __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

12-19-2003, 11:54 PM	#28
seacrow Registered User Join Date: Mar 2001 Location: Bradenton, Florida Posts: 366	Randy, put me down for some door edge guards. __________________ 71 GMC Custom. 350, 4bbl., auto. Restored in memory of my grandfather. 2008 Ford F-250 Super Duty CC King Ranch, moonroof, heated captains chairs, 6.4 PowerStroke. 2007 Suzuki Hayabusa, all black 1985 Mustang GT T-top, 5 spd. 54K orig miles.

12-19-2003, 11:59 PM	#29
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Bruce, I mailed your dash out today, I'm not sure how close the color is for sure on the visors, these are new, no arms in them $45 pair Bill, sounds good blazer1971, none of those Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-20-2003, 11:33 AM	#31
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	prices please for the following center vent drivers side rear bumper bracket for a 2wd blazer whats all the new wiring for? is it nos? do you have a completes set of nos wiring for a 72 swb 4x4 with a/c how much for the sway bar bushing set? will it fit the factory sway bar on my 72 2wd blazer? whats the firewall pad for a/c or non a/c trucks? is their a difference? __________________ 72 2wd blazer 72 swb 4x4

12-20-2003, 02:12 PM	#32
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	NOS Center vent $20 Bracket don't know what this one is for I have 3 engine wiring harnesses and one harness for under hood wiring harness for lights and altenator, aftermarket. No under dash wiring harnesses. I have 2 sets of lwb rear wiring harnesses for taillights the one that goes from cab to rear of truck. Sway bar bushing $25 set, its for factory sway bars Firewall pad is the the pads for center and left side $35, you have to buy the third pad for the right depending on what you have ac or not, is what I was told. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-19-2003, 11:37 PM	#27
blazer1971 Registered User Join Date: Apr 2001 Location: apollo bch,fl. usa Posts: 134	$$? for a windshield wiper switch and knob for 1972 to 33572

12-20-2003, 01:19 AM	#30
Don Loverink Account Suspended Join Date: Dec 2003 Location: Brainerd, Minnesota Posts: 1,063	Randy, I need a set of your door edge guards and the brown defrost covers if you still have them, send me a pm, thanks, Don

12-20-2003, 04:02 PM	#33
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	i pm'd you __________________ 72 2wd blazer 72 swb 4x4

12-20-2003, 06:14 PM	#34
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	PM sent __________________ I'm on the Instagram- @Gearhead_Kevin

12-20-2003, 06:24 PM	#35
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Back at ya both. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-21-2003, 12:29 AM	#36
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,723	wiring Randy, any wiring from rear crossmember out to taillights?

12-21-2003, 01:09 AM	#37
ZOOMY Senior Member Join Date: Feb 2003 Location: WIS Posts: 1,752	bezels Randy, I need a total of 2 sets of 67-68 chrome or polished headlight bezels. I can't remember if I had you set a pair aside or not.......Thanks.......Zoomy

12-21-2003, 01:15 AM	#38
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Dave, I got one set of New reproduction ones for $50, I'll set them back, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-21-2003, 09:28 AM	#39
llama Senior Member Join Date: Jul 2002 Location: northern IL. Posts: 263	wiring randy how much for 1 under hood, 1 engine, and 1 lwb rear wiring harnesses?

12-21-2003, 11:29 AM	#40
6772king Registered User Join Date: Feb 2002 Location: grove city pa usa Posts: 628	looking for 71-72 disk brake front brake hose also rear e-brake cables for 72 jimmy 2wd with coil sprung rear ( I think they are all the same as long as they are for coil springs) thanks Sean __________________ 67 chevy short step 2wd 427 71 chevy short fleet 4x4 396 72 gmc jimmy 2wd 377 71 chevy blazer 4x4 454 69 chevy longhorn 5.9l cummins 72 chevy 400 2wd custom camper 67 chevy lwb 4x4 454-in pieces 67 chevy panel soon 4x4-400 67 gmc dump 4x4 1 ton-305 WTF!! 72 chevy 3/4 ton 4x4 burb 350 70 chevy panel 2wd 302 5 speed tko "THERE IS NO REPLACMENT FOR DISPLACMENT"!!!!!!!



Register or Log In To remove these advertisements.

12-21-2003, 11:47 AM	#41
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Jeff, I have a engine harness left for $25, lwb rear wiring for $25 sold the under hood front wiring already. Sean, sorry none of those Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-21-2003, 12:22 PM	#42
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Randy, PM sent to you __________________ I'm on the Instagram- @Gearhead_Kevin

12-21-2003, 08:23 PM	#43
SWINGSAX68 Now the others dig........ Join Date: May 2002 Location: San Antonio, TX Posts: 1,520	Hey randy, How much for the bezel, what years you got...looking fr a 67-68 w/gauges. also how much for the tail wireing harness??? __________________ 68 Chevy C10 Stepside Black Primer 78 GMC Longbed White 09 Chevy Silverado Shortbed Granite Blue *LOOKING FOR A 67 4 DOOR IMPALA!!!Just like Sam and Dean Winchester!! 'Cause Mustangs are for p^#$ and you can fit a body in the trunk of a 67 Impala* MEMBER OF THE DRUM BRAKE CLUB Bachelor of Music in Jazz Studies Texas State University-San Marcos, TX Certified Music Educator I hope Mom is up there watching and being my Guardian Angel "I've got a fever.....and the only prescription.....IS MORE COW BELL" -The Legendary: Bruce Dickenson "F#$@ 'em up!!!!!!" -The Legendary: Rogelio Escobar TRUCKY LINKS** http://67-72chevytrucks.com/vboard/s...d.php?t=457750 http://67-72chevytrucks.com/vboard/s...d.php?t=461184 http://67-72chevytrucks.com/vboard/s...d.php?t=472848 http://67-72chevytrucks.com/vboard/s...d.php?t=417541 http://67-72chevytrucks.com/vboard/s...d.php?t=477788

12-21-2003, 09:04 PM	#44
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Roger, I got bezels 67-68 for $25, and the wiring harness for cab to end of truck taillight wiring is $25 all plus shipping. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-21-2003, 11:08 PM	#45
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	All NOS cables are sold, NOS door sill plates are sold. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-21-2003, 11:30 PM	#46
BAD4X4 Senior Member Join Date: Jan 2003 Location: La pine Oregon Posts: 1,668	Randy do you have the intermediate tail light wire harness for a shortbed goes from firewall to tail light harness, also need tail light harness with working marker lenz, shipping to 97702 thanx Dana __________________ 1972 Cheyenne K-30 6"lift {502 PROJECT} 1972 Cheyenne K-30 8"lift 454 450hp {Ol'Blue} 1972 Cheyenne K-20 Custom Stretch 6" lift 454 1972 Custom Deluxe K-20 4" lift 2007 GMC Crew Cab Diesel 6"lift {The Tow Rig 2017 Ford F-350 Crew Cab 6.7 6"lift (Wife's) 1977 El Camino SS Grandpa baught new 1986 K-30 Crew Cab 502 1955 Chevy 2-Door gasser 454 550hp{project} 1956 Chevy Bel-Air 2-Door hardtop 572 700hp 1979 Ford F-350 All Original 4x4 (Wife's)

12-21-2003, 11:32 PM	#47
GMNUT Registered User Join Date: Nov 2000 Location: Bonney Lake Washington Posts: 62	need orange clearance lites , what is fair for 5 of them zip is 98390 __________________ ERIC

12-21-2003, 11:38 PM	#48
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Dana, only wiring for a lwb, sorry no tailight harnesses. GMNUT, sold both sets already Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-25-2003, 09:33 PM	#49
Cethern What was I thinking?? Join Date: Dec 2003 Location: Commerce City Co Posts: 637	Pic #15 Oil pan Hello Randy I see in pic #15 you have a Alum. Oil pan that looks like a SBC is that up for sale and if so How much? I also saw some else you had a set M/T's what would you be asking for those? Now I wanted to asked you out of all the wheels you have have seen a 15x8 6 lug Slotted Mag? Thanks for your time. Oh run out your way a lot do you mind if a guys stops to drool for a little bit? And lastly is there room for a big truck to park near by? Cethern

12-25-2003, 10:54 PM	#50
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	I priced the sb oil pan for a $100 but had no interest so how about $80, I sold the MT covers already. I have a set of 6 lug mags but I think they came off a newer truck. You can stop by and yes there is a place to park a big truck close. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.