TX 67-72 lwb stepside bed sides, front panels and steps, no fenders strips or floor - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**WIDESIDE72** · 01-13-2014, 03:30 PM

No fenders or tailgate, floor, step brackets or sills/ crossmembers

Only the following is available:
Driver and passenger lwb bed sides $50 each
Driver and passenger LWB steps $20 each
Front panel $20

$100 for all of it FIRM

There are several holes on the pass side under where fender bolts on. Not much paint from factory. Nothing substantial elsewhere.

There is no wood or bed strips. The wood was rotted away as most are. The only bed strips are the ones welded to the bed side. One side is fine and the other has a spot about 2' long that is rusted away.

I used the fenders, tailgate and rearmost crossmember and step brackets for another bed

4x4 1969 GMC · 04-10-2014, 06:09 PM

Do you have better pics of the side steps? Could you send some please

**WIDESIDE72** · 04-10-2014, 07:03 PM

I thought i had downloaded photos. Here they are from another thread.

**WIDESIDE72** · 04-10-2014, 07:04 PM

#2 since this photo was taken, i was able to straighten out most of this bend back to original. contour by hand

**WIDESIDE72** · 04-10-2014, 07:05 PM

#3 i forget which side but its rusted through

**WIDESIDE72** · 04-10-2014, 07:06 PM

#4 no rust through but deep pits

4x4 1969 GMC · 04-10-2014, 09:06 PM

Those are a lot better than the ones I have lol the rust through that I see can be patched up but all in all they are in great shape

4x4 1969 GMC · 04-10-2014, 09:07 PM

What's the floor made of

**WIDESIDE72** · 04-10-2014, 09:23 PM

Quote:

Originally Posted by 4x4 1969 GMC

What's the floor made of

Air

It originally had a wood floor, metal strips and crossmembers. All of that is gone now!

4x4 1969 GMC · 04-10-2014, 09:31 PM

Ahh I'm starting to think all pre 72 fender side beds are all wood floor. That's ok I think I'm going with the Cobolo wood floor. So are there any swap meets. There in Austin pertaining to classic truck parts

**WIDESIDE72** · 04-11-2014, 07:14 AM

Quote:

Originally Posted by 4x4 1969 GMC

Ahh I'm starting to think all pre 72 fender side beds are all wood floor. That's ok I think I'm going with the Cobolo wood floor. So are there any swap meets. There in Austin pertaining to classic truck parts

All pre 1988 gm stepsides were all wood floor.

There is a big swap meet in new braunfels but its easter weekend.

**WIDESIDE72** · 01-10-2015, 02:24 PM

Still got this junk but it will be going to the scrapper in the spring.

01-13-2014, 03:30 PM	#1
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	67-72 lwb stepside bed sides, front panels and steps, no fenders strips or floor No fenders or tailgate, floor, step brackets or sills/ crossmembers Only the following is available: Driver and passenger lwb bed sides $50 each Driver and passenger LWB steps $20 each Front panel $20 $100 for all of it FIRM There are several holes on the pass side under where fender bolts on. Not much paint from factory. Nothing substantial elsewhere. There is no wood or bed strips. The wood was rotted away as most are. The only bed strips are the ones welded to the bed side. One side is fine and the other has a spot about 2' long that is rusted away. I used the fenders, tailgate and rearmost crossmember and step brackets for another bed Attached Images

04-10-2014, 07:05 PM	#5
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 67-72 lwb stepside bed sides, front panels and steps, no fenders strips or floor #3 i forget which side but its rusted through Attached Images

04-10-2014, 07:06 PM	#6
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 67-72 lwb stepside bed sides, front panels and steps, no fenders strips or floor #4 no rust through but deep pits Attached Images

04-10-2014, 09:06 PM	#7
4x4 1969 GMC Registered User Join Date: Apr 2014 Location: Haines Oregon Posts: 15	Re: 67-72 lwb stepside bed sides, front panels and steps, no fenders strips or floor Those are a lot better than the ones I have lol the rust through that I see can be patched up but all in all they are in great shape

04-10-2014, 09:07 PM	#8
4x4 1969 GMC Registered User Join Date: Apr 2014 Location: Haines Oregon Posts: 15	Re: 67-72 lwb stepside bed sides, front panels and steps, no fenders strips or floor What's the floor made of

04-10-2014, 06:09 PM	#2
4x4 1969 GMC Registered User Join Date: Apr 2014 Location: Haines Oregon Posts: 15	Re: 67-72 lwb stepside bed sides, front panels and steps, no fenders strips or floor Do you have better pics of the side steps? Could you send some please

04-10-2014, 07:03 PM	#3
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 67-72 lwb stepside bed sides, front panels and steps, no fenders strips or floor I thought i had downloaded photos. Here they are from another thread. Attached Images

04-10-2014, 07:04 PM	#4
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 67-72 lwb stepside bed sides, front panels and steps, no fenders strips or floor #2 since this photo was taken, i was able to straighten out most of this bend back to original. contour by hand Attached Images

04-10-2014, 09:31 PM	#10
4x4 1969 GMC Registered User Join Date: Apr 2014 Location: Haines Oregon Posts: 15	Re: 67-72 lwb stepside bed sides, front panels and steps, no fenders strips or floor Ahh I'm starting to think all pre 72 fender side beds are all wood floor. That's ok I think I'm going with the Cobolo wood floor. So are there any swap meets. There in Austin pertaining to classic truck parts

01-10-2015, 02:24 PM	#12
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 67-72 lwb stepside bed sides, front panels and steps, no fenders strips or floor Still got this junk but it will be going to the scrapper in the spring.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.