Pro Performance - Centerline Smoothies

[Devillusion]

so would custom backspacing be an additional cost onto that? Damn their prices are quite a bit more than centerline...I just have a hard time finding a nice tire for a 20x12 is all. I am going the "Delmo" wheel route but want the big lip out back in an 8 lug wheel. Want to keep her 8 lug just because....So need a good offset or narrowed a arms for the front, and want the big lip in the back and am getting the 14 bolt ff narrowed.

[Pro Performance]

The Centerline's are a 1-piece forged wheel, where as the Intro's will be custom built to your backspacing.... no additional charge. The Intro will run more because it is 2-piece and take a little more to build. The 8-lug version of Intro wheels do run an additional cost though, because they use a different center. My only other concern, is finding an old style dog dish cap that will cover the large 8-lug bolt pattern diameter.

The wheels can be built, but finding a cap to clear, may be difficult. I am not sure if one exists large enough to cover the 8-lug pattern, but I am not for certain.

[Devillusion]

Caps won't be an issue...have that figured already I believe. Bolt pattern is only 6.5" roughly across. It's only 3/4" larger each side of center.

Can you get me a price shipped to 58329 (shipping depot with a loading dock) on a pair of 22x10 and 22x12s? And also find out what the minimum and maximum backspacing they offer? And that is for an 8x165.1 or 8x6.5 bolt pattern with the large center hub. If the offsets are right I want to order a set of skinnys up front 8's? at max with alot of backspacing to bring them inward towards the frame.

thanks a million...

[Pro Performance]

No problem.... PM sent with pricing.

[Devillusion]

any chance anyone has some pics somewhere of the 8 lug versions or a 20x12 in any lug with a 4.5" bs? Would like to see some pics before I order but can't find a single thing anywhere.

[bbbc10]

wish they still made them in 24s

[preacher anthony]

Travis, on one of Delmo's post, it shows the clips being drilled and wheels painted, taped off and such. Am I correct then by these post that if I want to run Centerline's cap and later switch to '56 that these are two different wheels? The large cap doesn't look as good as smaller cap. I've run Centerlines since the '70s on everything.
I noticed on another post that you showed a Porterbuilt Stage 1 and Stage 2 kit to someone to lower his c10, but I didn't save it. It looked like you showed him the Stage 2 Deluxe kit. I just bought a '69, can't afford full PB now, would like to move in stages. I know it cost more this way, but $$ is $$. I would rather spend $$ on PB Stage1/2 than static and have to change all this later. Could u price for me please. Thanks

[Pro Performance]

Anthony,

Good talking with you earlier, and will get all that information together for you.

- Travis

[preacher anthony]

Thanks, received this morning.

[Pro Performance]

Just found out that 24x10's are now available in the Smoothie wheel, for both 5 & 6 lug. They will come with a 6" backspace.

[bbbc10]

hell yea!!!! how much?

[Pro Performance]

Just found out the 24x10's will be $850 per wheel.

[bbbc10]

dang!!!! I wonder why so much?

[Pro Performance]

They said it is because the production runs are smaller, so it drives the price up compared to the 20's or 22's.

[bbbc10]

price on some 22x9 to 75043 and still 2-3 weeks to built?

[Pro Performance]

Originally Posted by bbbc10

price on some 22x9 to 75043 and still 2-3 weeks to built?

They are about 3-4 weeks on polished. They would be $1,876 to your door for the set of (4) 22x9's. The 22x9's run $429 each, and had a slight price increase from their previous $399 price.

[2tontruck]

Looking to get a set of 20x8 for the front and 20x10 in the rear . 1972 Suburban 5x5 pattern. Please let me know shipping cost and price of the wheel shipped to a business address 68134. Thanks! (ps. Lets see what a pair of 22's would be for the rear)

[Pro Performance]

Pm Sent

[rgreathouse]

Are these available in 8x6.5 bolt pattern 20x12? If so price for a set of four shipped to 95642. Thanks

[rgreathouse]

Also can I still run gm caps with the wilderness series?

[Pro Performance]

Originally Posted by rgreathouse

Are these available in 8x6.5 bolt pattern 20x12? If so price for a set of four shipped to 95642. Thanks

Originally Posted by rgreathouse

Also can I still run gm caps with the wilderness series?

PM sent.

I think the GM dog dish cps will be too small to cover the larger 8 lugs, but not 100% sure.

[chevy2tom]

I've asked Detroit steel wheel about production of 8 lug 20" steel smoothies, if there's enough interest I'm sure they'd make them.

[Devillusion]

Ive been talking with detroit steel for a year or more now about those 8 lug wheels. All I hear is that they are in the works, but not yet available.

[chevy2tom]

Any pics of the 8 lug wheels yet?

[Pro Performance]

No, I unfortunately don't have any 8-lug wheel images, other than what is on their site. The 8-lug will look similar to the 6-lug.