CA Another 4X4 Front Sway Bar - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jjzepplin · 02-02-2014, 04:41 AM

Will these install in 72 frames and can I get in line for one? Oh I have a d60 with the plates that have the sway bar bolts in them already. Will it work?

KrazyRay · 02-02-2014, 10:00 AM

Quote:

Originally Posted by jjzepplin

Will these install in 72 frames and can I get in line for one? Oh I have a d60 with the plates that have the sway bar bolts in them already. Will it work?

Yes it will work. Your spring plate has the same provisions for the sway bar as the others. The difference is the wider u bolt pattern for the big axle. pm sent.
Thanks,
Ray

KrazyRay · 02-02-2014, 10:19 AM

Quote:

Originally Posted by 72longbed

Hey Ray,
I bought the sway bar and spring plates from you a while back, if you remember? Never did get the crossmember itself from you.

What would you charge me for just a crossmember itself for my 72 K20 shipped to 19525?

Thanks Ray,
72longbed

pm sent

*72longbed* · 02-02-2014, 10:56 AM

Ray,
please resend .... Inbox was full.

Thanks,
72

jjzepplin · 02-03-2014, 08:28 PM

I'll take one-money on the way.
Keep me in mind for a rear!

jjzepplin · 02-04-2014, 09:05 AM

Ready to send money.
Could you post some pics of the one I will get?
I have the spring plate bolts one the dana 60
And will not need those either unless they are different for some reason.
I am kicking myself right now for leaving all this stuff in Cali when I moved...

KrazyRay · 02-04-2014, 09:23 AM

The one you are getting is on post 46 of this thread minus the spring plates because you will need to use your dana 60 spring plates, u bolts, and bolts.
Thanks,
Ray

jjzepplin · 02-04-2014, 09:44 AM

Quote:

Originally Posted by CUSTOM/10

Ray

What if you have the stock steering box frame reinforcement plate welded in the inside of the frame rail. Will this work or would additional mods be needed ?

Thanks !
Gary

I have the inner frame plate and an outer aftermarket plate. I am sure i could make it work though. Will post pics when I get it and go for this upgrade.

jjzepplin · 02-04-2014, 09:47 AM

Payment sent. Thank again!
Do you have the part #'s for bushing replacement?

**CUSTOM/10** · 02-04-2014, 09:54 AM

I really like the ideal of having a front swaybar on my truck to help the handling. For the most part it will be used on the road, rarely seeing any off-road. But I'm also trying not to make to many mods to the truck that require drilling holes or cutting the frame. I also have the spring plates for the swaybar, so wouldn't need those.

How much would a set-up be shipped to 03873 with out the spring plates ?

Gary

KrazyRay · 02-04-2014, 12:31 PM

jjzepplin...Thanks. It will ship out this week.

custom/ 10...Its $125 total shipped without spring plates. I have another one being pulled in the next week.
Thanks,
Ray

**CUSTOM/10** · 02-04-2014, 01:23 PM

Let me know when you have it out !

jjzepplin · 02-06-2014, 06:41 AM

Jumped the gun on this and another one. So could I pass this one to Custom/10?

**CUSTOM/10** · 02-06-2014, 11:00 AM

Paypal sent !

Gary

KrazyRay · 02-24-2014, 02:36 AM

Here's another available:

Levi.Johnson · 02-24-2014, 10:38 PM

How much total with shipping to 77441?

Thank you,

Levi

Levi.Johnson · 02-24-2014, 10:39 PM

How much total with shipping to 77441?

Thank you,

Levi

KrazyRay · 02-24-2014, 11:45 PM

pm sent

**chewysask** · 02-25-2014, 02:20 PM

Do you ship to Canada?

Levi.Johnson · 02-25-2014, 02:33 PM

I'll take it. Payment sent.

Thank you,

Levi

1972 Jimmy · 02-25-2014, 07:16 PM

I would be interested in a sway bar assembly for a 72 Jimmy!! How much to ship to 48623?

KrazyRay · 02-25-2014, 07:36 PM

Sway bar sold to Levi...Thanks!

1972 Jimmy...Its $42 to ship to MI for a total of $132. It might be a little while before I get to the next one.

Thanks,
Ray

1972 Jimmy · 02-25-2014, 08:18 PM

Quote:

Originally Posted by KrazyRay

Sway bar sold to Levi...Thanks!

1972 Jimmy...Its $42 to ship to MI for a total of $132. It might be a little while before I get to the next one.

Thanks,
Ray

Count me in on the next one you find for a 1972 jimmy/blazer!!!
Thanks, Eric

rusty knuckles 5 · 02-25-2014, 11:39 PM

HI! I am interested in a sway bar system , will i have to drill new holes in frame or will i be able to use old existing holes? 1972 k-20 thanks

KrazyRay · 02-26-2014, 01:57 AM

You need to drill some holes.

02-02-2014, 04:41 AM	#51
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,566	Re: Another 4X4 Front Sway Bar Will these install in 72 frames and can I get in line for one? Oh I have a d60 with the plates that have the sway bar bolts in them already. Will it work? __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

02-02-2014, 10:56 AM	#54
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	Re: Another 4X4 Front Sway Bar Ray, please resend .... Inbox was full. Thanks, 72

02-03-2014, 08:28 PM	#55
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,566	Re: Another 4X4 Front Sway Bar I'll take one-money on the way. Keep me in mind for a rear! __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

02-04-2014, 09:05 AM	#56
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,566	Re: Another 4X4 Front Sway Bar Ready to send money. Could you post some pics of the one I will get? I have the spring plate bolts one the dana 60 And will not need those either unless they are different for some reason. I am kicking myself right now for leaving all this stuff in Cali when I moved... __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

02-04-2014, 09:23 AM	#57
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Another 4X4 Front Sway Bar The one you are getting is on post 46 of this thread minus the spring plates because you will need to use your dana 60 spring plates, u bolts, and bolts. Thanks, Ray

02-04-2014, 09:47 AM	#59
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,566	Re: Another 4X4 Front Sway Bar Payment sent. Thank again! Do you have the part #'s for bushing replacement? __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

02-04-2014, 09:54 AM	#60
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,857	Re: Another 4X4 Front Sway Bar I really like the ideal of having a front swaybar on my truck to help the handling. For the most part it will be used on the road, rarely seeing any off-road. But I'm also trying not to make to many mods to the truck that require drilling holes or cutting the frame. I also have the spring plates for the swaybar, so wouldn't need those. How much would a set-up be shipped to 03873 with out the spring plates ? Gary __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859

02-04-2014, 12:31 PM	#61
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Another 4X4 Front Sway Bar jjzepplin...Thanks. It will ship out this week. custom/ 10...Its $125 total shipped without spring plates. I have another one being pulled in the next week. Thanks, Ray

02-04-2014, 01:23 PM	#62
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,857	Re: Another 4X4 Front Sway Bar Let me know when you have it out ! __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859

02-06-2014, 06:41 AM	#63
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,566	Re: Another 4X4 Front Sway Bar Jumped the gun on this and another one. So could I pass this one to Custom/10? __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

02-06-2014, 11:00 AM	#64
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,857	Re: Another 4X4 Front Sway Bar Paypal sent ! Gary __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859

02-24-2014, 02:36 AM	#65
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Another 4X4 Front Sway Bar Here's another available: Attached Images

02-24-2014, 10:38 PM	#66
Levi.Johnson Registered User Join Date: Sep 2010 Location: Fulshear, TX Posts: 152	Re: Another 4X4 Front Sway Bar How much total with shipping to 77441? Thank you, Levi

02-24-2014, 10:39 PM	#67
Levi.Johnson Registered User Join Date: Sep 2010 Location: Fulshear, TX Posts: 152	Re: Another 4X4 Front Sway Bar How much total with shipping to 77441? Thank you, Levi

02-24-2014, 11:45 PM	#68
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Another 4X4 Front Sway Bar pm sent



Register or Log In To remove these advertisements.

02-25-2014, 02:20 PM	#69
chewysask Active Member Join Date: Apr 2013 Location: Saskatoon, Sask Posts: 193	Re: Another 4X4 Front Sway Bar Do you ship to Canada?

02-25-2014, 02:33 PM	#70
Levi.Johnson Registered User Join Date: Sep 2010 Location: Fulshear, TX Posts: 152	Re: Another 4X4 Front Sway Bar I'll take it. Payment sent. Thank you, Levi

02-25-2014, 07:16 PM	#71
1972 Jimmy Registered User Join Date: Nov 2012 Location: Freeland, Michigan Posts: 1,385	Re: Another 4X4 Front Sway Bar I would be interested in a sway bar assembly for a 72 Jimmy!! How much to ship to 48623?

02-25-2014, 07:36 PM	#72
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Another 4X4 Front Sway Bar Sway bar sold to Levi...Thanks! 1972 Jimmy...Its $42 to ship to MI for a total of $132. It might be a little while before I get to the next one. Thanks, Ray

02-25-2014, 11:39 PM	#74
rusty knuckles 5 Registered User Join Date: Dec 2011 Location: coulterville calif Posts: 263	Re: Another 4X4 Front Sway Bar HI! I am interested in a sway bar system , will i have to drill new holes in frame or will i be able to use old existing holes? 1972 k-20 thanks

02-26-2014, 01:57 AM	#75
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Another 4X4 Front Sway Bar You need to drill some holes.

Register or Log In To remove these advertisements.