![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Jan 2014
Location: Alberta, Canada
Posts: 37
|
'66 C10 Rear Drum Brake Removal and Disc Swap
Hello all,
Hoping someone can provide some guidance, I tried to search it, but either came up with a ton of front brake swap information or conflicting information. I'm in the process of swapping out my rear drum brakes in my '66 C10 with some disc brakes from CPP. Can someone please confirm that to remove the rear drums, I need to get into my differential and remove the hubs? Or can this be done by not doing this? Does anyone know of a 'how-to' or a step by step process available online for this conversion? Thank you, Mike |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jun 2013
Location: joshua tree ca.
Posts: 1,484
|
Re: '66 C10 Rear Drum Brake Removal and Disc Swap
if your drums wont just pull off then you need to go thru the backing plates and back off the brake adjusters .... you will have to hold the self adjuster arm/lever off of the adjusting wheel (with some hard wire) as you back them off
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Sep 2010
Location: Tulsa, Oklahoma
Posts: 1,925
|
Re: '66 C10 Rear Drum Brake Removal and Disc Swap
THE only thing holding the brake drums on are the wheel studs which align the brake drum then when you put the wheel in place and tighten the lug nuts. So the only thing holding your drums in place is rust or the brake shoes. Adjust them out so you can beat the drums off. You may still have to remove the axles to get the new disc brake kit installed. Kieth
![]() |
![]() |
![]() |
![]() |
#4 |
60-66 Nut
![]() ![]() Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,248
|
Re: '66 C10 Rear Drum Brake Removal and Disc Swap
Kieth is correct. You will still have to remove the axles to get the backing plates off, so that you can install the caliper brackets. To remove the axles yopu will have to remove the rear cover. Then remove the retaining bolt for the crossshaft, remove the crossshaft. Then slide the axles towards the center and the C-clips should drop out, and then you can remove the axles.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Jan 2014
Location: Alberta, Canada
Posts: 37
|
Re: '66 C10 Rear Drum Brake Removal and Disc Swap
Thanks Captainfab, kieth and jtrichard. Got 'er off!
|
![]() |
![]() |
![]() |
Bookmarks |
|
|