|
02-20-2014, 07:35 PM
|
#1 |
|
Senior Member
 Join Date: May 2002
Location: mt juliet, tennessee, usa
Posts: 237
|
Brake Help Please!
I am replacing the brake slave cylinders on the rear axle of my 69 C10 P/U.
I also would like to replace the flexible line that connects the hard line on the frame rail to the splitter/t joint on the axle(I have leaf springs). Tried a well known supplier of parts for 67-72 chevy trucks but was told they don't stock it. Anybody know where I can get this item?? Thanks! Jim in Middle Tennessee |
|
|
|
02-20-2014, 07:52 PM
|
#2 |
|
20' Daredevil (Ret)
Join Date: May 2003
Location: Jefferson State
Posts: 13,694
|
Re: Brake Help Please!
NAPA shows one for a 1969 C10 http://www.napaonline.com/Catalog/Ca...564_0435802278
Maybe also try Autozone, O'Reilly's, or whatever else is near you.
__________________
- Mike - 1972 K20 LWB 350/350/205 RIP El Jay |
|
|
|
|
02-20-2014, 10:39 PM
|
#3 |
|
Registered User
Join Date: Jun 2010
Location: San Diego Co.
Posts: 1,176
|
Re: Brake Help Please!
Got mine from RockAuto. Just buy the cheap chineese ones. Don't pay extra for a name, because chances are, it will be the cheap one anyway. When I ordered the Raybestos, they were Sunsongs. Same as some other one I had that was the wrong length. Trouble with mail order is, you don't really know what you have till you get it. But they have worked out fine so far, about 2 years.
__________________
1972 Chevy C-10, SWB, Fleet, 350/350, PS, PB, HEI, mostly stock, Survivor. 
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
