The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 12-27-2003, 07:58 PM   #1
skokie
Registered User
 
skokie's Avatar
 
Join Date: Oct 2003
Location: San Jose Ca.
Posts: 3,354
Speedometer 6 mph slow

My speedometer is showing 6 mph slow. Is this the tranny speedo gear? Tranny is a 400 turbo?

Thanks
skokie is offline   Reply With Quote
Old 12-27-2003, 08:16 PM   #2
Sweet72
Registered User
 
Sweet72's Avatar
 
Join Date: Nov 2003
Location: Alexandria, VA
Posts: 1,534
The correction can be made by changing the speedo driven gear. Check this website: bgsoflex.com
-Sam
__________________
'72 GMC SWB C1500 Custom, frame-off in progress. 383 SBC, 9:1CR, Comp Cams XE262H, Scat internal balanced crank, Eagle SIR 6" rods, Keith Black dish pistons, Dart Iron Eagle 72/180 heads, Weiand Stealth intake, Stewart stage I water pump, Holley 4bbl vac sec, TH350 with B&M Shift Improver Kit. 12 bolt positraction.
Sweet72 is offline   Reply With Quote
Old 12-27-2003, 08:19 PM   #3
Sweet72
Registered User
 
Sweet72's Avatar
 
Join Date: Nov 2003
Location: Alexandria, VA
Posts: 1,534
That address didn't work so try: www.bgsoflex.com/auto.html
-Sam
__________________
'72 GMC SWB C1500 Custom, frame-off in progress. 383 SBC, 9:1CR, Comp Cams XE262H, Scat internal balanced crank, Eagle SIR 6" rods, Keith Black dish pistons, Dart Iron Eagle 72/180 heads, Weiand Stealth intake, Stewart stage I water pump, Holley 4bbl vac sec, TH350 with B&M Shift Improver Kit. 12 bolt positraction.
Sweet72 is offline   Reply With Quote
Old 12-28-2003, 05:01 AM   #4
jimfulco
Registered User
 
Join Date: May 2003
Location: Shreveport LA
Posts: 3,170
Depends on at what mph it's 6mph slow. Speedo calibration is done on a percentage basis. If it's 6mph off at 60mph, then it's 10% off, & you need to change your speedo gear ratio by 10%. If you're lucky, you can just change the drive gear (the one on the tailshaft) by 10%, or change the driven gear (the one the cable is connected to) by 10%. Otherwise, you could change both gears to get a 10% change, or use a geared adapter (expensive) that changes the speed of your speedo cable. You can usually get pretty close by changing just the driven gear, which is a $5 part at the Chevy place. If you're reading 10% slow, count the teeth on your driven gear (best to do this twice just to make sure), then get a gear with 10% fewer teeth. Here's a chart of Turbo 400 gears & color codes from TCI, & some more codes & calibration info from NovaResource:

http://www.tciauto.com/tech_info/speedo_gears.htm#400
http://www.novaresource.org/speedo.htm
http://www.novaresource.org/speedo2.htm

Watch out for color codes when dealing with old used gears, because the colors sometimes fade. My speedo gear would have needed a fractional amount of teeth to be exact, so I rounded down, making it read a little bit high, just to be on the safe side (lead foot, etc.).
jimfulco is offline   Reply With Quote
Old 12-29-2003, 11:28 PM   #5
gmc71
Registered User
 
gmc71's Avatar
 
Join Date: Aug 2003
Location: Buffalo, NY
Posts: 115
Just go faster!
__________________
72 Chevy 4x4 350
55 Chevy Bel Air 350/350
53 Matchless G80s (motorcycle)
06 Trailblazer SS 400hp LS2
gmc71 is offline   Reply With Quote
Old 12-29-2003, 11:38 PM   #6
skokie
Registered User
 
skokie's Avatar
 
Join Date: Oct 2003
Location: San Jose Ca.
Posts: 3,354
Quote:
Just go faster!
I did.
skokie is offline   Reply With Quote
Old 12-30-2003, 12:05 AM   #7
ChevLoRay
Old Skool Club
 
ChevLoRay's Avatar
 
Join Date: Jun 2001
Location: Benton, AR "The Heart of Arkansas"
Posts: 10,880
Our interstates in Arkansas are being re-done. Between my home town of Benton, and Little Rock, the speed limit varies from 55 to 60. They have some of those portable speed displays to show you how much over the limit you're driving. On my truck, original 3.07's, according to the manual I have, with 255R70-15's, and the stock TH400, I'm running at 55mph, when my speedo shows me to be doing 52. So, I adjust. I drive 33, to go 35, in town. When I want to go 65, I drive so it says 61.

I need a 700R4, so I can go faster with less RPM's.
__________________
Member Nr. 2770

'96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed.

'69 C-10 SWB; 350/TH400 - in limbo

The older I get, the better I was.
ChevLoRay is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:42 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com