hELP with ANOTHER PS story... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hardwaycooke · 03-01-2014, 11:58 PM

Here's some picks of my setup..I was told by the seller of this truck it was a short pump, looks long to me...what do you think???

Also, I bought a Saginaw PS pump from summit and a pulley. Got it mounted and looks like I need a 3 groove water pump pulley or a 3 belt crank pulley.

Why is my pulley out so far. I used the stock brackets from the same year.

thanks for the info ahead of time...

**Boog** · 03-02-2014, 12:18 AM

If the back of the water pump is pretty much flush up to the timing chain cover it's a short pump. Long pump is about 3/4" away from the cover. There are a lot of pulley combinations out there. I'd look for a junk engine with a matching set still intact. Car or truck will work.

Tx Firefighter · 03-02-2014, 07:29 AM

That is a short pump.

On these trucks, the power steering uses an add on pulley that bolts atop the existing crankshaft pulley. You just use longer bolts and stack the two pulleys.

hardwaycooke · 03-02-2014, 11:47 AM

Quote:

Originally Posted by Tx Firefighter

That is a short pump.

On these trucks, the power steering uses an add on pulley that bolts atop the existing crankshaft pulley. You just use longer bolts and stack the two pulleys.

Yeah but I have a dbl on The fan. That one is still not far enough out to line it up. Should I had a double and make it a triple.

Tx Firefighter · 03-02-2014, 11:56 AM

Here is the add-on pulley for power steering. They're getting hard to find nowadays.

All installed.

The groove closest to the engine runs the water pump and alternator.

The add-on pulley runs just the power steering pump.

71 longbed · 03-02-2014, 12:01 PM

looks like you have the wrong pump.

hardwaycooke · 03-02-2014, 12:08 PM

Quote:

Originally Posted by 71 longbed

looks like you have the wrong pump.

I have a newer version but both Look same on and are off the same amount.

hardwaycooke · 03-02-2014, 12:10 PM

Quote:

Originally Posted by 71 longbed

looks like you have the wrong pump.

Uses same bracket too.

71 longbed · 03-02-2014, 01:27 PM

need to get someone to post some pics of there setup

71 longbed · 03-02-2014, 03:37 PM

check with teeitup he has a lot of parts

03-01-2014, 11:58 PM	#1
hardwaycooke Registered User Join Date: Sep 2013 Location: anderson, sc Posts: 647	hELP with ANOTHER PS story... Here's some picks of my setup..I was told by the seller of this truck it was a short pump, looks long to me...what do you think??? Also, I bought a Saginaw PS pump from summit and a pulley. Got it mounted and looks like I need a 3 groove water pump pulley or a 3 belt crank pulley. Why is my pulley out so far. I used the stock brackets from the same year. thanks for the info ahead of time... Attached Images

03-02-2014, 12:18 AM	#2
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,514	Re: hELP with ANOTHER PS story... If the back of the water pump is pretty much flush up to the timing chain cover it's a short pump. Long pump is about 3/4" away from the cover. There are a lot of pulley combinations out there. I'd look for a junk engine with a matching set still intact. Car or truck will work. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

03-02-2014, 07:29 AM	#3
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: hELP with ANOTHER PS story... That is a short pump. On these trucks, the power steering uses an add on pulley that bolts atop the existing crankshaft pulley. You just use longer bolts and stack the two pulleys. __________________ I'm on the Instagram- @Gearhead_Kevin

03-02-2014, 11:56 AM	#5
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: hELP with ANOTHER PS story... Here is the add-on pulley for power steering. They're getting hard to find nowadays. All installed. The groove closest to the engine runs the water pump and alternator. The add-on pulley runs just the power steering pump. __________________ I'm on the Instagram- @Gearhead_Kevin

03-02-2014, 12:01 PM	#6
71 longbed Registered User Join Date: Apr 2005 Location: ohio Posts: 36	Re: hELP with ANOTHER PS story... looks like you have the wrong pump. __________________

03-02-2014, 01:27 PM	#9
71 longbed Registered User Join Date: Apr 2005 Location: ohio Posts: 36	Re: hELP with ANOTHER PS story... need to get someone to post some pics of there setup __________________

03-02-2014, 03:37 PM	#10
71 longbed Registered User Join Date: Apr 2005 Location: ohio Posts: 36	Re: hELP with ANOTHER PS story... check with teeitup he has a lot of parts __________________



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.