|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
03-21-2014, 06:55 PM
|
#1 |
|
Registered User
Join Date: Mar 2014
Location: Oregon
Posts: 2
|
1970 CST 10 Front shock install
I am replacing the front shocks on my 1970 CST 10. of course the everything came of easily, But I cant get the bolt that attaches the shock to the control arm to engage the nut. the control arm has a recess for the nut but I have'nt had any luck getting it started on the bolt. any advice would be appreciated
|
|
|
|
03-21-2014, 08:12 PM
|
#2 |
|
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
Re: 1970 CST 10 Front shock install
you are not trying it with the shock on the bolt right
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
|
|
|
|
03-21-2014, 09:36 PM
|
#3 |
|
Registered User
Join Date: Mar 2014
Location: Oregon
Posts: 2
|
Re: 1970 CST 10 Front shock install
No, but I did discover the problem. I had to open the bracket on the control arm to allow the slightly larger Clevis on the new shock to fit. This prevented the nut from aligning with the bolt. So little room at that point. It was frustrating but I figured it out. Thanks for the reply
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
