Busy day today!!!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

FRENCHBLUE72 · 12-31-2003, 12:10 AM

Well today was great went to the junk yard got some stainless wiper's(I THINK THEY ARE STAINLESS??).. I also picked up a set of aluminum headlight bezel's for the truck so I can get rid of the black one's . Also got alot accomplished on the truck today or aleast I got more part's scattered everywhere... Here are some pic's of what I got done today..

FRENCHBLUE72 · 12-31-2003, 12:12 AM

More glass work on the fan schroud itchy itchy..

FRENCHBLUE72 · 12-31-2003, 12:15 AM

Should have the shroud finished and painted wensday.. Also glassed the crack's in the heater box... While I had it out I put in a new motorand heater core..Also broke out the spray gun and got some black on it..

dinnut · 12-31-2003, 12:17 AM

aluminum headlight bezels look so much better than the black ones do! good luck on that fan shroud i need one of those!

FRENCHBLUE72 · 12-31-2003, 12:18 AM

New headlight bezel's installed..

FRENCHBLUE72 · 12-31-2003, 12:20 AM

Made these filler plate's today also gonna shave the whole damn truck ..

FRENCHBLUE72 · 12-31-2003, 12:23 AM

Gonna shave the stake pocket's also ,so I shaved the bottom part also still need to make filler plate's for the top..

dinnut · 12-31-2003, 12:26 AM

is this on the 69 or the 72?

FRENCHBLUE72 · 12-31-2003, 12:27 AM

And the last thing I did was pull the whole front clip off today... Gonna start on the front end rebuild late wensday... Got aweek to get as much done as I can then it's back to work.... In total I spent about 12 hour's on it today which is more than I have spent on it in the last 3 month's as I was getting burned out... How come when your on vacation it alway's seem's like your still at work??

FRENCHBLUE72 · 12-31-2003, 12:31 AM

The 72 is what I spent all my time on today. it was my h.s. truck ... I had been spending alot of time on the 69 but it's not at my house so it's harder to work on...And my blazer is my dail driver so I can't take too much of it apart....

Mrs72shadetree · 12-31-2003, 01:43 AM

wow it is looking good...I know you must be tired. I told shadetree I was ready to go back out on the road so I could get some rest.

jay-dawg · 12-31-2003, 03:11 AM

boy...you really worked your fingers to the bone on your vacation. now that you have your front clip off, can you tell me whether the front steering link ends point towards or away from the engine? (Where the screw driver points in the pic)

Jay

jay-dawg · 12-31-2003, 03:32 AM

here's the pic....note screwdriver...lol

Hooter · 12-31-2003, 03:34 AM

is that 454?

FRENCHBLUE72 · 12-31-2003, 12:03 PM

End link's point toward's the front of the truck,I replaced all the inner/outter/adjusting sleeve's about 4 month's ago it was kinda a pain by myself tryin to hold up all the part's get buddy to help ya hold all the stuff...

FRENCHBLUE72 · 12-31-2003, 12:07 PM

Hooter it's a 1975 454 outta a suburban.. Reciept's in the glove box said the motor had been rebuilt about 8,000 mile's before I bought it for 400. It would smoke the tire's on the sub pretty good so I am just gonna chrome it out and run it..

jay-dawg · 12-31-2003, 01:11 PM

thanks for the info.

Jay

12-31-2003, 12:10 AM	#1
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Busy day today!!!!! Well today was great went to the junk yard got some stainless wiper's(I THINK THEY ARE STAINLESS??).. I also picked up a set of aluminum headlight bezel's for the truck so I can get rid of the black one's . Also got alot accomplished on the truck today or aleast I got more part's scattered everywhere... Here are some pic's of what I got done today.. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

12-31-2003, 12:12 AM	#2
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	More glass work on the fan schroud itchy itchy.. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

12-31-2003, 12:15 AM	#3
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Should have the shroud finished and painted wensday.. Also glassed the crack's in the heater box... While I had it out I put in a new motorand heater core..Also broke out the spray gun and got some black on it.. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

12-31-2003, 12:17 AM	#4
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	aluminum headlight bezels look so much better than the black ones do! good luck on that fan shroud i need one of those! __________________ 70 longbed 496/th400/Ford 9"

12-31-2003, 12:18 AM	#5
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	New headlight bezel's installed.. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

12-31-2003, 12:20 AM	#6
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Made these filler plate's today also gonna shave the whole damn truck .. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

12-31-2003, 12:23 AM	#7
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Gonna shave the stake pocket's also ,so I shaved the bottom part also still need to make filler plate's for the top.. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

12-31-2003, 12:26 AM	#8
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	is this on the 69 or the 72? __________________ 70 longbed 496/th400/Ford 9"

12-31-2003, 12:27 AM	#9
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	And the last thing I did was pull the whole front clip off today... Gonna start on the front end rebuild late wensday... Got aweek to get as much done as I can then it's back to work.... In total I spent about 12 hour's on it today which is more than I have spent on it in the last 3 month's as I was getting burned out... How come when your on vacation it alway's seem's like your still at work?? Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

12-31-2003, 12:31 AM	#10
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	The 72 is what I spent all my time on today. it was my h.s. truck ... I had been spending alot of time on the 69 but it's not at my house so it's harder to work on...And my blazer is my dail driver so I can't take too much of it apart.... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

12-31-2003, 01:43 AM	#11
Mrs72shadetree YES ITS MINE Join Date: Nov 2003 Location: Virginia Posts: 241	wow it is looking good...I know you must be tired. I told shadetree I was ready to go back out on the road so I could get some rest. __________________ 97 Lumina 69 short step i got it and no he cant drive it!!!!!!!!!!!!! GO DALE JR.!!!! I love chihuahua's Bassett, Va

12-31-2003, 03:11 AM	#12
jay-dawg chevelito Join Date: Jun 2001 Location: Honolulu, HI USA Posts: 1,609	boy...you really worked your fingers to the bone on your vacation. now that you have your front clip off, can you tell me whether the front steering link ends point towards or away from the engine? (Where the screw driver points in the pic) Jay __________________ New deadline...when my son can drive. Aloha from Honolulu, HI Last edited by jay-dawg; 12-31-2003 at 03:31 AM.

12-31-2003, 03:32 AM	#13
jay-dawg chevelito Join Date: Jun 2001 Location: Honolulu, HI USA Posts: 1,609	here's the pic....note screwdriver...lol Attached Images __________________ New deadline...when my son can drive. Aloha from Honolulu, HI

12-31-2003, 03:34 AM	#14
Hooter My other Love Join Date: Aug 2001 Location: Castlegar B.C. Canada Posts: 4,085	is that 454? __________________ Castlegar B.C.The great white North (Canada Eh!) Hooter_5@hotmail.com First generation Monte Carlo club pictures of my life

12-31-2003, 12:03 PM	#15
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	End link's point toward's the front of the truck,I replaced all the inner/outter/adjusting sleeve's about 4 month's ago it was kinda a pain by myself tryin to hold up all the part's get buddy to help ya hold all the stuff... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..



Register or Log In To remove these advertisements.

12-31-2003, 12:07 PM	#16
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Hooter it's a 1975 454 outta a suburban.. Reciept's in the glove box said the motor had been rebuilt about 8,000 mile's before I bought it for 400. It would smoke the tire's on the sub pretty good so I am just gonna chrome it out and run it.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

12-31-2003, 01:11 PM	#17
jay-dawg chevelito Join Date: Jun 2001 Location: Honolulu, HI USA Posts: 1,609	thanks for the info. Jay __________________ New deadline...when my son can drive. Aloha from Honolulu, HI

Register or Log In To remove these advertisements.