350, low mileage - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*Randy70C-10* · 12-31-2003, 12:22 PM

Selling the 350 that I replaced with ZZ-3. It has less than 1500 miles on machining and rebuild. Runs great, I ran it in my 72 for a couple months. $700 takes it, intake to oil pan. It will have to be picked up.
Rebuild and machining was done by Wayne Hill, the same guy that built the blown 350 in my Model A.

70ChevyLongbed · 12-31-2003, 04:04 PM

I can't buy it right now (but I WISH I could!) But I can't believe it hasn't been snapped up yet

*Randy70C-10* · 12-31-2003, 07:48 PM

Yeah, it's a bargain, and I might actually consider negotiating the price a little. I don't want to see a good engine go to waste.

krue · 12-31-2003, 08:40 PM

I know we have all heard it before, but I really wish you were closer! But by the time I drive up there it would have to be a HECK of a deal!

**ScottH** · 12-31-2003, 11:27 PM

Can u send me some specs on the engine (2 or 4 bolt, balanced, pistons, cam, heads, intake, etc.)? Also, would u be interested in a partial trade for parts (buckets, console, etc.) ?

Thanks.

SDELVY55@aol.com

*Randy70C-10* · 01-01-2004, 12:00 AM

I honestly don't remember if it is a 2 bolt or 4 bolt, the casting number is 14010207 so it could be either. (keep in mind that I go through alot of engines)

We did a stock rebuild on it. The intake is an Edelbrock Torquer 360 deg. It's for a steeper cam but still seemed to work very nicely. If you want to use a spreadbore carb (like a quadrajet) I have a GM stock aluminum 4 barrel intake that I'll throw in at no extra charge. Sorry, no trades. Just trying to get some money together so I can save up for a wiring kit, NOS grill and new bumpers. For another $200, I'll throw in the th350 tranny that has the same miles on it.
I'll make the price $600! Any takers?

ianjenkins · 01-01-2004, 02:18 PM

1980-85 14010207 350 - - 4 bolt truck

Found this casting info on a website

jose · 01-01-2004, 02:41 PM

Wow Rand y that is a great deal . I do wish you were closer my son bought a 64 Impala 2 door hardtop and he needs a nice 350 with the tranny . Some body closer will snap it up .

*Randy70C-10* · 01-01-2004, 05:01 PM

Quote:

Originally posted by ianjenkins
1980-85 14010207 350 - - 4 bolt truck

Found this casting info on a website

According to Mortec.com it came in both 2 and 4 bolt. I just don't want to mis-lead anyone. I'm pretty sure that it's a 4 bolt block but I'm not 100 percent sure and I gave the engine lift back to my buddy so I have no way of getting under it right now.

12-31-2003, 12:22 PM	#1
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	350, low mileage Selling the 350 that I replaced with ZZ-3. It has less than 1500 miles on machining and rebuild. Runs great, I ran it in my 72 for a couple months. $700 takes it, intake to oil pan. It will have to be picked up. Rebuild and machining was done by Wayne Hill, the same guy that built the blown 350 in my Model A. Last edited by Randy70C-10; 12-31-2003 at 12:24 PM.

12-31-2003, 04:04 PM	#2
70ChevyLongbed Howzit?!? Join Date: Jan 2003 Location: Maryville, TN Posts: 1,265	I can't buy it right now (but I WISH I could!) But I can't believe it hasn't been snapped up yet __________________ Jason Hawaiian-J 70 Longbed, 307, Edelbrock Carb 1404, Edelbrock Intake 2101, Dual Roller Timing chain and gears, 214/214 cam, Comp Roller Rockers, dual Flowmasters. 1999 Chevy Tahoe 2004 Mini Cooper S 71 BMW 2002 - Sold

12-31-2003, 08:40 PM	#4
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	I know we have all heard it before, but I really wish you were closer! But by the time I drive up there it would have to be a HECK of a deal! __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

01-01-2004, 12:00 AM	#6
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	I honestly don't remember if it is a 2 bolt or 4 bolt, the casting number is 14010207 so it could be either. (keep in mind that I go through alot of engines) We did a stock rebuild on it. The intake is an Edelbrock Torquer 360 deg. It's for a steeper cam but still seemed to work very nicely. If you want to use a spreadbore carb (like a quadrajet) I have a GM stock aluminum 4 barrel intake that I'll throw in at no extra charge. Sorry, no trades. Just trying to get some money together so I can save up for a wiring kit, NOS grill and new bumpers. For another $200, I'll throw in the th350 tranny that has the same miles on it. I'll make the price $600! Any takers? Last edited by Randy70C-10; 01-01-2004 at 12:03 AM.

01-01-2004, 02:41 PM	#8
jose Registered User Join Date: Feb 2001 Location: Salem , Oregon 97301 Posts: 1,796	Wow Rand y that is a great deal . I do wish you were closer my son bought a 64 Impala 2 door hardtop and he needs a nice 350 with the tranny . Some body closer will snap it up . __________________ 68 GMC 4x4 SWB jose6772@yahoo.com

12-31-2003, 07:48 PM	#3
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	Yeah, it's a bargain, and I might actually consider negotiating the price a little. I don't want to see a good engine go to waste.

12-31-2003, 11:27 PM	#5
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,193	Can u send me some specs on the engine (2 or 4 bolt, balanced, pistons, cam, heads, intake, etc.)? Also, would u be interested in a partial trade for parts (buckets, console, etc.) ? Thanks. SDELVY55@aol.com

01-01-2004, 02:18 PM	#7
ianjenkins Registered User Join Date: Mar 2003 Location: Frederick, MD Posts: 160	1980-85 14010207 350 - - 4 bolt truck Found this casting info on a website



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.