MI 1972 GMC 2500 "Part out" - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**DaHos** · 03-30-2014, 09:44 AM

1972 GMC 2500 Big Block Custom Camper / Cheyenne

Going to be breaking this one down, keeping most BB items.

I do have a day job and its still quite cold here so I will be at this as I can.
All items are as is.
PayPal or USPS money orders.
First Ill take it gets it. Shipping extra.

Items not listed just ask !

Bare Cab and Doors - $300 Local only !
Complete front clip/doghouse - $200 Local only !
Big Block PS remoter reservoir - $35
Big Block Pass side heat shield w screws - $40
Big Block A/t Shift linkage and bracket -- $75
Big Block 4 core radiator hold downs Upper and Lower -- $30
Big Block Fan Shroud --has cut out on bottom $50
Grill, inner and outer with headlight buckets and bezels (complete) - $100
Grille brace -- $10
Hood latch, pin and latch plate (attaches to hood) -- $15
Core support to fender brace pair -- $10
Front bumper brackets -- $30
Seat belts - ok drivers - $35
Steering wheel (67-68) -- $75
Throttle cable, bracket and th400 kickdown switch -- $75
Heater components --Interior side. $30
Sun visors - Nice stitching $35
Dome light and harness -- $5
washer switch and knob -- $5
Headlight Switch and knob -- $5
Saddle fuel tank selector $20
Taillight - reverse housings -- $10
EBrake - $40
Brake booster/proportioning valve/brackets -- $100
Gauge cluster $50
Ashtray $15

Thx, D'

Vintage Windmills · 03-30-2014, 09:52 AM

Will you sell any of the cab roof marker lights?

**DaHos** · 03-30-2014, 09:53 AM

Pics 2

mx289 · 03-30-2014, 09:56 AM

Hi Dave.
What do you need for the mirrors ?
Any pics of the saddle tank selector ?

Thanks

**DaHos** · 03-30-2014, 09:56 AM

Quote:

Originally Posted by Vintage Windmills

Will you sell any of the cab roof marker lights?

Sorry but I already pulled them for my use on my 68 C30.

BKSS67 · 03-30-2014, 10:04 AM

Interested in the hub caps (can't tell are they chevy or gmc?) a picture of them would be great.

The dash pad (any cracks or damage?)

Antenna with hardware. Original and fixed mast or telescoping?

Please let me know what you would like for these items as well

Thanks
Brian

**DaHos** · 03-30-2014, 10:28 AM

Quote:

Originally Posted by mx289

Hi Dave.
What do you need for the mirrors ?
Any pics of the saddle tank selector ?

Thanks

Mirror heads are nice other than flaky paint over the stainless, the ps tripod is stainless the ds is steel. Id do $60 shipped for both mirrors and the selector valve.

**DaHos** · 03-30-2014, 10:35 AM

Quote:

Originally Posted by BKSS67

Interested in the hub caps (can't tell are they chevy or gmc?) a picture of them would be great.

The dash pad (any cracks or damage?)

Antenna with hardware. Original and fixed mast or telescoping?

Please let me know what you would like for these items as well

Thanks
Brian

Caps are chevy and only have 2. The other side has the later Flat style black and red GMC caps. Dents and dings, $10 ea.
Antenna is a solid mast but has been modified, $5
Dash Pad would make a nice patina driver, no curling but does have pressure cracks. $40

**too much stuff** · 03-30-2014, 10:56 AM

In line for the 2 chevy hubcaps

**DeadheadNM** · 03-30-2014, 11:00 AM

In line for the dash pad...

Are the door latches in decent shape and available? Would consider the door regulators and rear view mirror as well.

Thanks

**DaHos** · 03-30-2014, 11:15 AM

Quote:

Originally Posted by too much stuff

In line for the 2 chevy hubcaps

I just found another wall hanger in the garage, same condition. All 3 $45 shipped.

Quote:

Originally Posted by DeadheadNM

In line for the dash pad...

Are the door latches in decent shape and available? Would consider the door regulators and rear view mirror as well.

Thanks

Door Latches, ds works but the roller pin is loose, pass side is VERY good condition.
Door latch remotes, DS not 72 and loose, Pass side is 72 correct and solid, good return spring.
Window regulator on Pass side 72 correct and rolls up / down nicely.
Rear view mirror, is a repo but very good shape.

**DeadheadNM** · 03-30-2014, 11:20 AM

Thanks - sounds like RH pass door parts are in decent shape - what do you need for the latch and window regulator shipped to 59901? Will pass on LH parts as sound so-so and the mirror. Thanks, Pete

BKSS67 · 03-30-2014, 11:21 AM

I'll take the thre chevy caps. I would like the dash pad as well but do you have an appropriate box for it? I'm not sure if it fits those triangular boxes?

Feel free to PM to work out the details.

Thanks
Brian

rusty knuckles 5 · 03-30-2014, 11:29 AM

HI ! I am interested in the power steering mounting brackets from the big block let me k now the price thanks

**DaHos** · 03-30-2014, 11:29 AM

Quote:

Originally Posted by DeadheadNM

Thanks - sounds like RH pass door parts are in decent shape - what do you need for the latch and window regulator shipped to 59901? Will pass on LH parts as sound so-so and the mirror. Thanks, Pete

Pass side door latch and Pass side window regulator and pass side latch remote (needed ?) $65 shipped for all 3 items.

Quote:

Originally Posted by BKSS67

I'll take the thre chevy caps. I would like the dash pad as well but do you have an appropriate box for it? I'm not sure if it fits those triangular boxes?

Feel free to PM to work out the details.

Thanks
Brian

Yes I will have proper box and packaging for the dash pad. I will have to ship the caps and pad separately. $45 shipped for the caps, $65 shipped for dash pad. Total - $110

rusty knuckles 5 · 03-30-2014, 11:31 AM

that is the power steering pump brackets 2 pieces

**davischevy** · 03-30-2014, 11:31 AM

Any pics of the fender emblems?

**DaHos** · 03-30-2014, 11:41 AM

Quote:

Originally Posted by rusty knuckles 5

HI ! I am interested in the power steering mounting brackets from the big block let me k now the price thanks

Sorry keeping the PS pump and brackets. I only have the remote reservoir available. Check with VA72C10 here for a nice setup: http://67-72chevytrucks.com/vboard/s...d.php?t=622701

Quote:

Originally Posted by davischevy

Any pics of the fender emblems?

Not great, 1 missing the inlay. All studs intact. $15 shipped for pair.

BKSS67 · 03-30-2014, 11:42 AM

That works for me. Please let me know how you would like payment.

Thanks
Brian

Quote:

Originally Posted by DaHos

Yes I will have proper box and packaging for the dash pad. I will have to ship the caps and pad separately. $45 shipped for the caps, $65 shipped for dash pad. Total - $110

mx289 · 03-30-2014, 11:48 AM

Quote:

Originally Posted by DaHos

Mirror heads are nice other than flaky paint over the stainless, the ps tripod is stainless the ds is steel. Id do $60 shipped for both mirrors and the selector valve.

Good deal,but i will pass on the mirrors and selector valve.
Thanks for the pics Dave.

**undertaker72** · 03-30-2014, 11:56 AM

are you going to sell the 4 core radiator , or keeping it with big block stuff

**DaHos** · 03-30-2014, 12:00 PM

Quote:

Originally Posted by undertaker72

are you going to sell the 4 core radiator , or keeping it with big block stuff

Yes its available, have yet to determine its condition. Ill be heading out in a bit to gather up some items and Ill take another look for you.

**DaHos** · 03-30-2014, 12:05 PM

Visor Pics, also have a pr of repo saddle 72 armrests available.

**undertaker72** · 03-30-2014, 12:06 PM

im interested , does it have the upper heater hose return , and auto trans correct ,

nobolt · 03-30-2014, 04:17 PM

hi Dave,
what shape is the driver door in?
I still need a '72 DSide.
thanks

03-30-2014, 09:44 AM	#1
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,858	1972 GMC 2500 "Part out" 1972 GMC 2500 Big Block Custom Camper / Cheyenne Going to be breaking this one down, keeping most BB items. I do have a day job and its still quite cold here so I will be at this as I can. All items are as is. PayPal or USPS money orders. First Ill take it gets it. Shipping extra. Items not listed just ask ! Bare Cab and Doors - $300 Local only ! Complete front clip/doghouse - $200 Local only ! Big Block PS remoter reservoir - $35 Big Block Pass side heat shield w screws - $40 Big Block A/t Shift linkage and bracket -- $75 Big Block 4 core radiator hold downs Upper and Lower -- $30 Big Block Fan Shroud --has cut out on bottom $50 Grill, inner and outer with headlight buckets and bezels (complete) - $100 Grille brace -- $10 Hood latch, pin and latch plate (attaches to hood) -- $15 Core support to fender brace pair -- $10 Front bumper brackets -- $30 Seat belts - ok drivers - $35 Steering wheel (67-68) -- $75 Throttle cable, bracket and th400 kickdown switch -- $75 Heater components --Interior side. $30 Sun visors - Nice stitching $35 Dome light and harness -- $5 washer switch and knob -- $5 Headlight Switch and knob -- $5 Saddle fuel tank selector $20 Taillight - reverse housings -- $10 EBrake - $40 Brake booster/proportioning valve/brackets -- $100 Gauge cluster $50 Ashtray $15 Thx, D' Attached Images __________________ 1967 C10 SWB Owner - Rustbelt Restorations

03-30-2014, 09:52 AM	#2
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: 1972 GMC 2500 "Part out" Will you sell any of the cab roof marker lights? __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

03-30-2014, 09:53 AM	#3
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,858	Re: 1972 GMC 2500 "Part out" Pics 2 Attached Images __________________ 1967 C10 SWB Owner - Rustbelt Restorations

03-30-2014, 09:56 AM	#4
mx289 Registered User Join Date: May 2013 Location: wall,nj Posts: 865	Re: 1972 GMC 2500 "Part out" Hi Dave. What do you need for the mirrors ? Any pics of the saddle tank selector ? Thanks __________________ Tom 71 K2500 71 K5 Jimmy

03-30-2014, 10:04 AM	#6
BKSS67 Registered User Join Date: Feb 2009 Location: Norcal, CA Posts: 169	Re: 1972 GMC 2500 "Part out" Interested in the hub caps (can't tell are they chevy or gmc?) a picture of them would be great. The dash pad (any cracks or damage?) Antenna with hardware. Original and fixed mast or telescoping? Please let me know what you would like for these items as well Thanks Brian

03-30-2014, 10:56 AM	#9
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,770	Re: 1972 GMC 2500 "Part out" In line for the 2 chevy hubcaps __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

03-30-2014, 11:00 AM	#10
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,428	Re: 1972 GMC 2500 "Part out" In line for the dash pad... Are the door latches in decent shape and available? Would consider the door regulators and rear view mirror as well. Thanks __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland Last edited by DeadheadNM; 03-30-2014 at 11:04 AM. Reason: added rear mirror

03-30-2014, 11:20 AM	#12
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,428	Re: 1972 GMC 2500 "Part out" Thanks - sounds like RH pass door parts are in decent shape - what do you need for the latch and window regulator shipped to 59901? Will pass on LH parts as sound so-so and the mirror. Thanks, Pete __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

03-30-2014, 11:21 AM	#13
BKSS67 Registered User Join Date: Feb 2009 Location: Norcal, CA Posts: 169	Re: 1972 GMC 2500 "Part out" I'll take the thre chevy caps. I would like the dash pad as well but do you have an appropriate box for it? I'm not sure if it fits those triangular boxes? Feel free to PM to work out the details. Thanks Brian

03-30-2014, 11:29 AM	#14
rusty knuckles 5 Registered User Join Date: Dec 2011 Location: coulterville calif Posts: 263	Re: 1972 GMC 2500 "Part out" HI ! I am interested in the power steering mounting brackets from the big block let me k now the price thanks

03-30-2014, 11:31 AM	#16
rusty knuckles 5 Registered User Join Date: Dec 2011 Location: coulterville calif Posts: 263	Re: 1972 GMC 2500 "Part out" that is the power steering pump brackets 2 pieces

03-30-2014, 11:31 AM	#17
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,838	Re: 1972 GMC 2500 "Part out" Any pics of the fender emblems? __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

03-30-2014, 11:56 AM	#21
undertaker72 Senior Member Join Date: Dec 2013 Location: nephi , utah Posts: 2,308	Re: 1972 GMC 2500 "Part out" are you going to sell the 4 core radiator , or keeping it with big block stuff

03-30-2014, 12:05 PM	#23
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,858	Re: 1972 GMC 2500 "Part out" Visor Pics, also have a pr of repo saddle 72 armrests available. Attached Images __________________ 1967 C10 SWB Owner - Rustbelt Restorations

03-30-2014, 12:06 PM	#24
undertaker72 Senior Member Join Date: Dec 2013 Location: nephi , utah Posts: 2,308	Re: 1972 GMC 2500 "Part out" im interested , does it have the upper heater hose return , and auto trans correct ,



Register or Log In To remove these advertisements.

03-30-2014, 04:17 PM	#25
nobolt Registered User Join Date: Oct 2011 Location: Algonac, MI 48001 Posts: 1,848	Re: 1972 GMC 2500 "Part out" hi Dave, what shape is the driver door in? I still need a '72 DSide. thanks __________________ Dave "... government even in its best state is but a necessary evil. Thomas Paine "It wasn't a lie, it was ineptitude with insufficient cover." Donald Draper (Mad Men)

Register or Log In To remove these advertisements.