IA 1972 GMC 4x4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gehrts · 04-15-2014, 10:51 PM

Parting out a 1972 GMC 3/4 ton 350 / 4 speed / 4x4. 4.11 gear ratio. Parting out complete chassis.

Front and rear spiral shocks $120.00 + shipping $75.00 shipped
Complete clutch linkage setup $40.00 + shipping SOLD
Power steering pump and brackets $50.00 + shipping SOLD
Complete gas pedal / throttle cable assembly $50.00 + shipping
Front exhaust hanger $15.00 + shipping $12.50 Shipped
Points distributor & coil $25.00 + shipping
High hump manual / 4x4 $40.00 + shipping
Fan shroud $40.00 + shipping
Upper radiator hose pipe $25.00 + shipping Sold
Spark plug wire heat shields w/bolts $25.00 + shipping
Brake booster assembly with brackets $30.00 + shipping CAN NOT FIND
Exhaust manifolds left & right $75.00 + shipping SOLD
Rear overload spring set / with hardware $100.00 + shipping $60.00 + shipping
Transmission / transfer case cross member $50.00 + shipping
Front cross member $25.00 + shipping
Front bump stops $10.00 each + shipping
Rear bump stops and brackets $12.00 each + shipping
Front spring front mount $30.00 each + shipping
Front spring rear mount $20.00 each + shipping
Left front spring stop $10.00 + shipping
Front parking brake cable $20.00 + shipping

**cst204x4** · 04-15-2014, 11:20 PM

Interested in speedometer cable and spark plug wire holders at rear of intake

gehrts · 04-15-2014, 11:24 PM

Rear spark plug wire holders and speedometer cable $30.00 + shipping.

**t korinek** · 04-15-2014, 11:28 PM

I'll take the upper metal hose if not completely rusted out, power steering pump & brackets , does that include the pulley too? Pending reasonable shipping to 85207
& how about the front lockout hub assemblies? are they in decent shape? how much shipped with the other stuff
Thanks,
Tom

**DeadheadNM** · 04-15-2014, 11:44 PM

Cost and condition of the pitman arm shipped to 59901 please.

**DeadheadNM** · 04-15-2014, 11:48 PM

Also, should be a Dana 60 rear if a GMC but if an Eaton HO52 does it have a posi rear diff?

JeffD72 · 04-15-2014, 11:51 PM

Interestd in the Spark plug wire heat shields w/bolts, can you quote shipping to 66207?

**cst204x4** · 04-15-2014, 11:53 PM

I'll take the cable and wire holders also in line on lockouts and shipped price on brake booster assembly to 48817

dodgiesdad · 04-16-2014, 06:03 AM

I would be interested in the torque mount for the transfer case (this is the part which bolts to the side of the transfer case and then to the passenger side of the frame). What is the condition and cost shipped to 15701?

**undertaker72** · 04-16-2014, 06:26 AM

ill take the shroud if its in good shape , do you have a pic , and ill get in line on front selective hubs

**D.PASSMORE** · 04-16-2014, 06:38 AM

Interested in locking hubs, a few more pictures and condition description. Thanks

gehrts · 04-16-2014, 08:15 AM

t korinek, I will get pictures of the upper metal hose to you today. Power steering pump, pulley and brackets are still on the truck. I will get them removed tonight to get a weight for shipping. The front hubs are not for sale. Thanks Mike

gehrts · 04-16-2014, 08:19 AM

DeadheadNM

I will inspect the pitman arm tonight and send you pictures. I should be able to ship the pitman arm in a USPS flat rate envelope, I think. Thanks Mike.

gehrts · 04-16-2014, 08:22 AM

DeadheadNM
I will look at the rear differential tonight. Pretty sure it is the Dana. Doesn't the Eaton have a back cover on the housing, but the carrier comes out the front? Thanks Mike

gehrts · 04-16-2014, 08:24 AM

JeffD72
I will remove the heat shields tonight and get a shipping quote. Thanks Mike

gehrts · 04-16-2014, 08:27 AM

cst204x4
I will remove the spark plug wire holders tonight. The lockouts are not for sale. I will get a shipping price on the brake booster assembly. Thanks Mike.

gehrts · 04-16-2014, 08:29 AM

dodgiesdad

I will inspect the mount and get you pictures tonight. Thanks Mike

gehrts · 04-16-2014, 08:30 AM

undertaker72

I will get you pictures today of the shroud. The hubs are not for sale.
Thanks Mike.

**DeadheadNM** · 04-16-2014, 08:30 AM

Quote:

Originally Posted by gehrts

DeadheadNM

I will inspect the pitman arm tonight and send you pictures. I should be able to ship the pitman arm in a USPS flat rate envelope, I think. Thanks Mike.

Thanks - I'll bet a small flat rate box would work. Hoping the grooves are nice and solid.

Quote:

Originally Posted by gehrts

DeadheadNM
I will look at the rear differential tonight. Pretty sure it is the Dana. Doesn't the Eaton have a back cover on the housing, but the carrier comes out the front? Thanks Mike

Yes, unlike the Dana the Eaton rear diff is removed via the front of the axle and has a round cover on the rear.

gehrts · 04-16-2014, 08:31 AM

D.PASSMORE

Sorry, the hubs are not for sale. Thanks Mike.

sboris · 04-16-2014, 09:18 AM

Second in line on the upper radiator pipe..

**JimH2828** · 04-16-2014, 09:49 AM

I'll take the exhaust manifolds with bolts if $80 shipped to 30005 GA works for you.

Thanks

BlueMule72 · 04-16-2014, 10:17 AM

Front driveshaft to 58045?

gehrts · 04-16-2014, 03:55 PM

JimH2828
I will get them weighed and get you a shipping quote.

Thanks Mike

gehrts · 04-16-2014, 03:56 PM

BlueMule72

I will get it weighed and get a shipping quote tonight. Thanks Mike.

04-15-2014, 10:51 PM	#1
gehrts Registered User Join Date: Aug 2012 Location: Mallard, Iowa Posts: 136	1972 GMC 4x4 Parting out a 1972 GMC 3/4 ton 350 / 4 speed / 4x4. 4.11 gear ratio. Parting out complete chassis. Front and rear spiral shocks $120.00 + shipping $75.00 shipped Complete clutch linkage setup $40.00 + shipping SOLD Power steering pump and brackets $50.00 + shipping SOLD Complete gas pedal / throttle cable assembly $50.00 + shipping Front exhaust hanger $15.00 + shipping $12.50 Shipped Points distributor & coil $25.00 + shipping High hump manual / 4x4 $40.00 + shipping Fan shroud $40.00 + shipping Upper radiator hose pipe $25.00 + shipping Sold Spark plug wire heat shields w/bolts $25.00 + shipping Brake booster assembly with brackets $30.00 + shipping CAN NOT FIND Exhaust manifolds left & right $75.00 + shipping SOLD Rear overload spring set / with hardware $100.00 + shipping $60.00 + shipping Transmission / transfer case cross member $50.00 + shipping Front cross member $25.00 + shipping Front bump stops $10.00 each + shipping Rear bump stops and brackets $12.00 each + shipping Front spring front mount $30.00 each + shipping Front spring rear mount $20.00 each + shipping Left front spring stop $10.00 + shipping Front parking brake cable $20.00 + shipping Attached Images Last edited by gehrts; 04-30-2014 at 06:06 PM.

04-15-2014, 11:20 PM	#2
cst204x4 Senior Member Join Date: Jan 2012 Location: corunna michigan Posts: 2,006	Re: 1972 GMC 4x4 Interested in speedometer cable and spark plug wire holders at rear of intake __________________ 1970 CST 4x4 collecting nos parts for this project 1972 cutlass owned since 1984 1972 cutlass conv 1970 Cutlass conv 1981 chevy shortbox 1986 grand national 2004 2500HD Crew Cab 66,000 miles

04-15-2014, 11:24 PM	#3
gehrts Registered User Join Date: Aug 2012 Location: Mallard, Iowa Posts: 136	Re: 1972 GMC 4x4 Rear spark plug wire holders and speedometer cable $30.00 + shipping. Attached Images

04-15-2014, 11:28 PM	#4
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,194	Re: 1972 GMC 4x4 I'll take the upper metal hose if not completely rusted out, power steering pump & brackets , does that include the pulley too? Pending reasonable shipping to 85207 & how about the front lockout hub assemblies? are they in decent shape? how much shipped with the other stuff Thanks, Tom __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

04-15-2014, 11:44 PM	#5
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,450	Re: 1972 GMC 4x4 Cost and condition of the pitman arm shipped to 59901 please. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

04-15-2014, 11:48 PM	#6
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,450	Re: 1972 GMC 4x4 Also, should be a Dana 60 rear if a GMC but if an Eaton HO52 does it have a posi rear diff? __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

04-15-2014, 11:51 PM	#7
JeffD72 Registered User Join Date: Feb 2011 Location: Birmingham, Alabama Posts: 220	Re: 1972 GMC 4x4 Interestd in the Spark plug wire heat shields w/bolts, can you quote shipping to 66207?

04-15-2014, 11:53 PM	#8
cst204x4 Senior Member Join Date: Jan 2012 Location: corunna michigan Posts: 2,006	Re: 1972 GMC 4x4 I'll take the cable and wire holders also in line on lockouts and shipped price on brake booster assembly to 48817 __________________ 1970 CST 4x4 collecting nos parts for this project 1972 cutlass owned since 1984 1972 cutlass conv 1970 Cutlass conv 1981 chevy shortbox 1986 grand national 2004 2500HD Crew Cab 66,000 miles

04-16-2014, 06:03 AM	#9
dodgiesdad Registered User Join Date: Nov 2010 Location: Indiana, PA Posts: 220	Re: 1972 GMC 4x4 I would be interested in the torque mount for the transfer case (this is the part which bolts to the side of the transfer case and then to the passenger side of the frame). What is the condition and cost shipped to 15701?

04-16-2014, 06:26 AM	#10
undertaker72 Senior Member Join Date: Dec 2013 Location: nephi , utah Posts: 2,308	Re: 1972 GMC 4x4 ill take the shroud if its in good shape , do you have a pic , and ill get in line on front selective hubs

04-16-2014, 06:38 AM	#11
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,059	Re: 1972 GMC 4x4 Interested in locking hubs, a few more pictures and condition description. Thanks __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

04-16-2014, 08:15 AM	#12
gehrts Registered User Join Date: Aug 2012 Location: Mallard, Iowa Posts: 136	Re: 1972 GMC 4x4 t korinek, I will get pictures of the upper metal hose to you today. Power steering pump, pulley and brackets are still on the truck. I will get them removed tonight to get a weight for shipping. The front hubs are not for sale. Thanks Mike

04-16-2014, 08:19 AM	#13
gehrts Registered User Join Date: Aug 2012 Location: Mallard, Iowa Posts: 136	Re: 1972 GMC 4x4 DeadheadNM I will inspect the pitman arm tonight and send you pictures. I should be able to ship the pitman arm in a USPS flat rate envelope, I think. Thanks Mike.

04-16-2014, 08:22 AM	#14
gehrts Registered User Join Date: Aug 2012 Location: Mallard, Iowa Posts: 136	Re: 1972 GMC 4x4 DeadheadNM I will look at the rear differential tonight. Pretty sure it is the Dana. Doesn't the Eaton have a back cover on the housing, but the carrier comes out the front? Thanks Mike

04-16-2014, 08:24 AM	#15
gehrts Registered User Join Date: Aug 2012 Location: Mallard, Iowa Posts: 136	Re: 1972 GMC 4x4 JeffD72 I will remove the heat shields tonight and get a shipping quote. Thanks Mike



Register or Log In To remove these advertisements.

04-16-2014, 08:27 AM	#16
gehrts Registered User Join Date: Aug 2012 Location: Mallard, Iowa Posts: 136	Re: 1972 GMC 4x4 cst204x4 I will remove the spark plug wire holders tonight. The lockouts are not for sale. I will get a shipping price on the brake booster assembly. Thanks Mike.

04-16-2014, 08:29 AM	#17
gehrts Registered User Join Date: Aug 2012 Location: Mallard, Iowa Posts: 136	Re: 1972 GMC 4x4 dodgiesdad I will inspect the mount and get you pictures tonight. Thanks Mike

04-16-2014, 08:30 AM	#18
gehrts Registered User Join Date: Aug 2012 Location: Mallard, Iowa Posts: 136	Re: 1972 GMC 4x4 undertaker72 I will get you pictures today of the shroud. The hubs are not for sale. Thanks Mike.

04-16-2014, 08:31 AM	#20
gehrts Registered User Join Date: Aug 2012 Location: Mallard, Iowa Posts: 136	Re: 1972 GMC 4x4 D.PASSMORE Sorry, the hubs are not for sale. Thanks Mike.

04-16-2014, 09:18 AM	#21
sboris Registered User Join Date: Jun 2011 Location: Osceola, Ia Posts: 2,017	Re: 1972 GMC 4x4 Second in line on the upper radiator pipe.. __________________ Shawn 68 chevy K/20 05 chevy 3/4 4x4 71 short step-sold 71 chevy Beauville van My build. http://67-72chevytrucks.com/vboard/s...d.php?t=633039

04-16-2014, 09:49 AM	#22
JimH2828 Senior Member Join Date: Oct 2012 Location: Cumming GA Posts: 621	Re: 1972 GMC 4x4 I'll take the exhaust manifolds with bolts if $80 shipped to 30005 GA works for you. Thanks

04-16-2014, 10:17 AM	#23
BlueMule72 Registered User Join Date: Nov 2012 Location: Hillsboro ND Posts: 28	Re: 1972 GMC 4x4 Front driveshaft to 58045?

04-16-2014, 03:55 PM	#24
gehrts Registered User Join Date: Aug 2012 Location: Mallard, Iowa Posts: 136	Re: 1972 GMC 4x4 JimH2828 I will get them weighed and get you a shipping quote. Thanks Mike

04-16-2014, 03:56 PM	#25
gehrts Registered User Join Date: Aug 2012 Location: Mallard, Iowa Posts: 136	Re: 1972 GMC 4x4 BlueMule72 I will get it weighed and get a shipping quote tonight. Thanks Mike.

Register or Log In To remove these advertisements.