Best fitting inner fenders what have you used - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**blazercrazy70** · 04-17-2014, 08:04 PM

I need to replace my passenger inner fender used goodmark on my blazer project was not real happy with fitment. Anybody have a suggestion

19673ontree · 04-17-2014, 08:09 PM

My truck came with a new one when I got it and it fit perfect but I dont know what brand it was ?

Lee H · 04-17-2014, 08:21 PM

Not sure who's is best fitting but do know you have to start every fastener before tightening them down. Then tighten slowly around to get it lined up. I used truck shop inners once and cut the crap out of my hand washing near the lip, it did not have the correct angle bent into it. Switched to good used originals and they fit great.

In The Ten Ring · 04-17-2014, 08:21 PM

I'd like to know too since it doesn't look like I'm going to find a front passenger (inner) fender that's original and in nice shape.

CST10 · 04-17-2014, 09:03 PM

I recently bought both from brothers trucks. Fit perfect. Start every bolt and leave loose until all in. Then start tightening from the upper inners then from front to back then check them all again. Make sure ya get new j nuts and bolts. They will make the job easier.

Mine fit perfect without any overhang or places to catch ya hand on.

In The Ten Ring · 04-17-2014, 09:23 PM

Brother's huh? I think they have a special going on right now for inner fenders.

THANKS

04-17-2014, 08:04 PM	#1
blazercrazy70 Senior Member Join Date: Sep 2006 Location: illinois Posts: 516	Best fitting inner fenders what have you used I need to replace my passenger inner fender used goodmark on my blazer project was not real happy with fitment. Anybody have a suggestion

04-17-2014, 08:09 PM	#2
19673ontree CAN'T FIX NOTHIN Join Date: Sep 2006 Location: SOUTHRUST VIRGINIA !!! Posts: 2,112	Re: Best fitting inner fenders what have you used My truck came with a new one when I got it and it fit perfect but I dont know what brand it was ? __________________ 1967 C10 Shortbed Fleetside Small back glass 6 cyl 3spd on the tree 3.08 gears underdash AC

04-17-2014, 08:21 PM	#3
Lee H Registered User Join Date: Jun 2010 Location: Upland Ca Posts: 4,147	Re: Best fitting inner fenders what have you used Not sure who's is best fitting but do know you have to start every fastener before tightening them down. Then tighten slowly around to get it lined up. I used truck shop inners once and cut the crap out of my hand washing near the lip, it did not have the correct angle bent into it. Switched to good used originals and they fit great. __________________ 1972 C10 SWB, Air, PS, PB, 350/350THM. Second owner. 1965 Corvette roadster, 44K miles, 327/365 SHP, 4 speed, side exhaust, knockoffs, teak, second owner (bought in 1970), Have ALL numbers matching components. My frame off restoration thread: http://67-72chevytrucks.com/vboard/s...d.php?t=556703

04-17-2014, 08:21 PM	#4
In The Ten Ring Registered User Join Date: Jun 2013 Location: West Virginia Posts: 6,421	Re: Best fitting inner fenders what have you used I'd like to know too since it doesn't look like I'm going to find a front passenger (inner) fender that's original and in nice shape.

04-17-2014, 09:03 PM	#5
CST10 Registered User Join Date: Sep 2013 Location: Gonzales, La Posts: 1,441	Re: Best fitting inner fenders what have you used I recently bought both from brothers trucks. Fit perfect. Start every bolt and leave loose until all in. Then start tightening from the upper inners then from front to back then check them all again. Make sure ya get new j nuts and bolts. They will make the job easier. Mine fit perfect without any overhang or places to catch ya hand on. __________________ MyToys: Goldilocks the "Ol School Survivor" 1968 C10, SWB Stepside, 08/15 TOTM, 250 CI 6 cylinder, 3 on the tree, 3.73 rear, 3/5 static drop, 23,500 original miles. Samson the 1970 CST10, LWB, 462Ci, Turbo 350 tranny, 3.08 rear gear, PB, PS, A/C, AM/FM, 2/4 Drop. Brutus the 1998 Camaro Z28, 33,500 original miles, LS1, 519 RWHP/497 RWTQ. Member of the Louisiana Classic Truck Club, LCTC Member of the Louisiana C10 Club Member of the Baton Rouge Drifters Car Club

04-17-2014, 09:23 PM	#6
In The Ten Ring Registered User Join Date: Jun 2013 Location: West Virginia Posts: 6,421	Re: Best fitting inner fenders what have you used Brother's huh? I think they have a special going on right now for inner fenders. THANKS



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.