|
06-17-2014, 06:10 PM
|
#1 |
|
Senior Member
 Join Date: May 2013
Location: Vero Beach FL
Posts: 293
|
Help
Swapping three speed to a sm465 four speed in 67 K10 Rockwel T221. I thought I could cut down the length of the coupler , but after pulling everything apart I discovered the three speed coupler was fine spline on one end and 10 spline on the other. I need 10 spline on both ends. The coupler is 2" diameter. And a little less than 4" long.Thanks John
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
