KS Parting out a 72 chevy 402 BB 1/2 ton now - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

burb71 · 06-15-2014, 08:16 AM

Randy if still up for grabs
Ill take the 2 upper radiator hold downs with the 2 screws that hold fan shroud.

teeitup · 06-15-2014, 03:04 PM

kaphillips, I will look at bag and see condition

dueceswild, thanks

Reeds72, sorry sold it to Bluek5 already

burb71, these are sold but I should have another set out there, $22 shipped

Thanks Randy

burb71 · 06-15-2014, 05:42 PM

Ill take the other set of upper radiator hold downs with the screws to hold shroud.
Thanks Randy

kaphillips · 06-16-2014, 10:41 AM

In addition to my other parts if sun visors and seat belts are still available a price on those also please . and awaiting condition and price on the jack accessory bag if OEM. Thanks.

BLT gmc · 06-16-2014, 12:33 PM

Is the flange for the high hump good? I would like to be in-line for a cab cut if the flange is good. I am also interested in a good tool acessory bag. Thank you, Bruce

teeitup · 06-16-2014, 12:40 PM

Steve, I will get them mailed out Tues

Kaphillips, I forgot to look at jack bag last night , I will later today for sure. Visors are pretty good, one has indentions from mirrors. Belts are so so. $35 for belts and visors plus shipping. I will check out the bag and let you know

BLTGMC, I think its good, how much do you need around it? $30 plus shipping

Thanks Randy

BLT gmc · 06-16-2014, 02:27 PM

Randy,

3 inches.
Bruce

teeitup · 06-16-2014, 06:04 PM

Bruce, I can get that much, it will have some surface rust? Thanks Randy

teeitup · 06-16-2014, 10:45 PM

Kaphillips, the bag has a couple tears in it. $8 for it plus shipping

kaphillips · 06-16-2014, 11:47 PM

Quote:

Originally Posted by teeitup

Kaphillips, the bag has a couple tears in it. $8 for it plus shipping

Ok I will take the 2 engine pull brackets off the intake, the 2 spark plug wire looms off valve covers, all the seat belts and the visors, and the jack bag. Please provide total of all requested parts shipped to Amarillo TX 79106. Thank you so much, Ken 806-236-4375

teeitup · 06-17-2014, 06:36 AM

Ken, I will have a total tonight, Thanks

BLT gmc · 06-17-2014, 09:12 AM

Randy,
I will take the flange. Pm sent
Bruce

teeitup · 06-17-2014, 09:02 PM

Kaphillips, one of the male plastic ends is cracked, I have another complete one I will throw in deal, one female has some rust

teeitup · 06-17-2014, 09:03 PM

trailing arms

teeitup · 06-17-2014, 09:03 PM

exhaust hangers

teeitup · 06-17-2014, 09:04 PM

turbo 400 stub shaft

kaphillips · 06-17-2014, 10:25 PM

Payment sent on all requested parts, thanks.

Justintime67 · 06-18-2014, 07:44 PM

Do you still have the speedo reducer in pic 6?? And would you happen to have a metal clutch delete plug??

teeitup · 06-18-2014, 10:46 PM

Ken, I will get you parts shipped out asap, Thanks

Justin, I have 4 or 5 reducers out there. $15 for one and $10 for delete plus $6 shipping. Thanks Randy

69Rumbler · 06-18-2014, 11:02 PM

Looking for number 5

waylonbud · 06-21-2014, 09:58 AM

Hi Randy,
Im sorry for not getting back till now, been really busy and guess I forgot I asked for a quote. I will take the booster/master cylinder/prop valve set-up in unknown condition. Even if its bad could use for a core or for part #. Im at 37303 and I think I still got your paypal.
Thanks, Waylon.

teeitup · 06-21-2014, 12:59 PM

69Rumbler, I should have one, what about those other parts your asked about?

Waylon, I still have it, but I have a new pay pal addy, I will pm you. Thanks Randy

Justintime67 · 06-23-2014, 07:07 PM

Quote:

Originally Posted by teeitup

Justin, I have 4 or 5 reducers out there. $15 for one and $10 for delete plus $6 shipping. Thanks Randy

I'll take a reducer and the plug.

teeitup · 06-23-2014, 09:44 PM

seam spot weld cam apart and some rust on one side and deep surface rust on other

BLT gmc · 06-25-2014, 11:04 AM

Randy,
What are the total charges for the flange and shipping?
Bruce

06-15-2014, 08:16 AM	#101
burb71 Active Member Join Date: Oct 2002 Location: Ft. Myers, Fl Posts: 1,716	Re: Parting out a 72 chevy 402 BB 1/2 ton now Randy if still up for grabs Ill take the 2 upper radiator hold downs with the 2 screws that hold fan shroud.

06-15-2014, 03:04 PM	#102
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting out a 72 chevy 402 BB 1/2 ton now kaphillips, I will look at bag and see condition dueceswild, thanks Reeds72, sorry sold it to Bluek5 already burb71, these are sold but I should have another set out there, $22 shipped Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-15-2014, 05:42 PM	#103
burb71 Active Member Join Date: Oct 2002 Location: Ft. Myers, Fl Posts: 1,716	Re: Parting out a 72 chevy 402 BB 1/2 ton now Ill take the other set of upper radiator hold downs with the screws to hold shroud. Thanks Randy

06-16-2014, 10:41 AM	#104
kaphillips Registered User Join Date: Jul 2013 Location: Amarillo Tx Posts: 502	Re: Parting out a 72 chevy 402 BB 1/2 ton now In addition to my other parts if sun visors and seat belts are still available a price on those also please . and awaiting condition and price on the jack accessory bag if OEM. Thanks.

06-16-2014, 12:33 PM	#105
BLT gmc Registered User Join Date: Feb 2014 Location: West Iowa Posts: 1,106	Re: Parting out a 72 chevy 402 BB 1/2 ton now Is the flange for the high hump good? I would like to be in-line for a cab cut if the flange is good. I am also interested in a good tool acessory bag. Thank you, Bruce

06-16-2014, 12:40 PM	#106
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting out a 72 chevy 402 BB 1/2 ton now Steve, I will get them mailed out Tues Kaphillips, I forgot to look at jack bag last night , I will later today for sure. Visors are pretty good, one has indentions from mirrors. Belts are so so. $35 for belts and visors plus shipping. I will check out the bag and let you know BLTGMC, I think its good, how much do you need around it? $30 plus shipping Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-16-2014, 02:27 PM	#107
BLT gmc Registered User Join Date: Feb 2014 Location: West Iowa Posts: 1,106	Re: Parting out a 72 chevy 402 BB 1/2 ton now Randy, 3 inches. Bruce

06-16-2014, 06:04 PM	#108
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting out a 72 chevy 402 BB 1/2 ton now Bruce, I can get that much, it will have some surface rust? Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-16-2014, 10:45 PM	#109
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting out a 72 chevy 402 BB 1/2 ton now Kaphillips, the bag has a couple tears in it. $8 for it plus shipping __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-17-2014, 06:36 AM	#111
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting out a 72 chevy 402 BB 1/2 ton now Ken, I will have a total tonight, Thanks __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-17-2014, 09:12 AM	#112
BLT gmc Registered User Join Date: Feb 2014 Location: West Iowa Posts: 1,106	Re: Parting out a 72 chevy 402 BB 1/2 ton now Randy, I will take the flange. Pm sent Bruce

06-17-2014, 09:02 PM	#113
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting out a 72 chevy 402 BB 1/2 ton now Kaphillips, one of the male plastic ends is cracked, I have another complete one I will throw in deal, one female has some rust Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-17-2014, 09:03 PM	#114
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting out a 72 chevy 402 BB 1/2 ton now trailing arms Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-17-2014, 09:03 PM	#115
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting out a 72 chevy 402 BB 1/2 ton now exhaust hangers Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-17-2014, 09:04 PM	#116
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting out a 72 chevy 402 BB 1/2 ton now turbo 400 stub shaft Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

06-17-2014, 10:25 PM	#117
kaphillips Registered User Join Date: Jul 2013 Location: Amarillo Tx Posts: 502	Re: Parting out a 72 chevy 402 BB 1/2 ton now Payment sent on all requested parts, thanks.

06-18-2014, 07:44 PM	#118
Justintime67 Registered User Join Date: Oct 2012 Location: Victorville, CA Posts: 150	Re: Parting out a 72 chevy 402 BB 1/2 ton now Do you still have the speedo reducer in pic 6?? And would you happen to have a metal clutch delete plug?? __________________ Justin 67 C10 LWB Fleetside "Bessie"

06-18-2014, 10:46 PM	#119
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting out a 72 chevy 402 BB 1/2 ton now Ken, I will get you parts shipped out asap, Thanks Justin, I have 4 or 5 reducers out there. $15 for one and $10 for delete plus $6 shipping. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-18-2014, 11:02 PM	#120
69Rumbler Registered User Join Date: Jan 2013 Location: Los Angeles Posts: 903	Re: Parting out a 72 chevy 402 BB 1/2 ton now Looking for number 5 Attached Images __________________ 1969 C20 CUSTOM "RUMBLEr"

06-21-2014, 09:58 AM	#121
waylonbud Registered User Join Date: Dec 2011 Location: Athens,TN Posts: 302	Re: Parting out a 72 chevy 402 BB 1/2 ton now Hi Randy, Im sorry for not getting back till now, been really busy and guess I forgot I asked for a quote. I will take the booster/master cylinder/prop valve set-up in unknown condition. Even if its bad could use for a core or for part #. Im at 37303 and I think I still got your paypal. Thanks, Waylon.

06-21-2014, 12:59 PM	#122
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting out a 72 chevy 402 BB 1/2 ton now 69Rumbler, I should have one, what about those other parts your asked about? Waylon, I still have it, but I have a new pay pal addy, I will pm you. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 06-21-2014 at 01:05 PM.

06-23-2014, 09:44 PM	#124
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting out a 72 chevy 402 BB 1/2 ton now seam spot weld cam apart and some rust on one side and deep surface rust on other Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-25-2014, 11:04 AM	#125
BLT gmc Registered User Join Date: Feb 2014 Location: West Iowa Posts: 1,106	Re: Parting out a 72 chevy 402 BB 1/2 ton now Randy, What are the total charges for the flange and shipping? Bruce

Register or Log In To remove these advertisements.