AZ parting out 67 swb - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

oilyrag80 · 06-20-2014, 09:29 PM

Quote:

Originally Posted by michael bustamante

Did the truck have 67 window crank handles?

no it did not

oilyrag80 · 06-20-2014, 09:30 PM

Quote:

Originally Posted by Lowood77

Sir, i'll take the bed.

PM sent

**TBONE1964** · 06-20-2014, 09:33 PM

Quote:

Originally Posted by oilyrag80

i was talking about just the knobs but they are not what I thought.
I would do $40 shipped for the cluster if you want it
thanks james

Thank you James,

I will get back with you,
Tom

**jmader** · 06-20-2014, 10:39 PM

Quote:

Originally Posted by oilyrag80

I have 4 of these and this is this is the best one out of the bunch spring is good and it dosen't feel all loose
$8 shipped
thanks james

Is it off a 67? I will take it if so. They are different than 68-72

oilyrag80 · 06-20-2014, 11:12 PM

Quote:

Originally Posted by jmader

Is it off a 67? I will take it if so. They are different than 68-72

No the 67 one was loose. I thought only 72 was different due to the plastic door panels?

**too much stuff** · 06-20-2014, 11:31 PM

Payment sent with a little extra for fees for the belts and bezels.

oilyrag80 · 06-21-2014, 12:13 AM

Thank You I got it. Its all boxed up and ready to go will ship sat or monday

**jmader** · 06-21-2014, 09:46 AM

Yes the inside door handles are different and won't fit the 68-71 style. I think they're shorter if I remember correctly. Maybe someone else who knows for sure can chime in.

oilyrag80 · 06-21-2014, 07:33 PM

Quote:

Originally Posted by jmader

Yes the inside door handles are different and won't fit the 68-71 style. I think they're shorter if I remember correctly. Maybe someone else who knows for sure can chime in.

you are right 67 ones are a little shorter then the 68-71 I compared them.
The spring in the 67 one is no good. but grooves are nice
You can have the 67 one if it will help you out.
thanks

oilyrag80 · 06-21-2014, 07:43 PM

Ok this is pretty much it for the small stuff
fender emblems nice shape all studs are good $37 shipped
door panels no rust nice shape $65 shipped
67 vent windows pass side is good shape driver side needs some work
both need rubber $75 shipped
67 dash cut out ash tray is tight $50 shipped
let me know James

**jmader** · 06-22-2014, 10:19 AM

Quote:

Originally Posted by oilyrag80

you are right 67 ones are a little shorter then the 68-71 I compared them.
The spring in the 67 one is no good. but grooves are nice
You can have the 67 one if it will help you out.
thanks

Ok thanks for the offer but I'll wait until I find one with a good spring.

gotztofly · 08-04-2014, 10:33 AM

You still have the front fenders and hood?

gotztofly · 08-04-2014, 10:35 AM

Do you also still have the vent windows?

mrweld · 08-04-2014, 11:07 AM

Will you take $100 for dash cut out and door panels shipped to 37303?

Nola67 · 08-04-2014, 05:35 PM

How is the radiator core support?

vweater2001 · 08-04-2014, 06:12 PM

I'd be interested in the reverse lights including all the brackets, wiring to the tranny and the switch to tranny as well?

Let me know how much for that including shipping to 91331.

Mando

**burb71** · 08-05-2014, 10:56 PM

I need the little light bulb socket and a few inches of the wire that went to light up the heater control

Shortstep67 · 08-06-2014, 09:23 AM

Interested in rear driver's side fender, let me know price and shipping.
Thanks

angelo_32806 · 08-12-2014, 07:18 PM

Do you have a title?

gotztofly · 09-03-2014, 04:08 PM

How is the hood? how much ? thanks

jerrya59 · 09-03-2014, 07:26 PM

are the fenders emblems still availabe and are they $37 for the pair?
If so I will take them

**zicc1835** · 09-03-2014, 09:06 PM

2nd on the fender emblems if they get to me

**zicc1835** · 09-08-2014, 07:51 PM

Quote:

Originally Posted by zicc1835

2nd on the fender emblems if they get to me

I'm gonna be out your way did the fender emblems sell?
Thanks
Jz

seth7843 · 04-02-2015, 09:28 AM

Do you still have the gauge cluster for sale?

JG67 · 04-02-2015, 04:46 PM

Do you still have the 67 passenger fender. I'm interested. I'm in Phoenix.

Thanks Julian

06-20-2014, 11:31 PM	#56
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,768	Re: parting out 67 swb Payment sent with a little extra for fees for the belts and bezels. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

06-21-2014, 12:13 AM	#57
oilyrag80 Registered User Join Date: Jul 2006 Location: Tucson Az Posts: 1,695	Re: parting out 67 swb Thank You I got it. Its all boxed up and ready to go will ship sat or monday __________________ check out my crew cab build http://67-72chevytrucks.com/vboard/s...d.php?t=557019

06-21-2014, 09:46 AM	#58
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: parting out 67 swb Yes the inside door handles are different and won't fit the 68-71 style. I think they're shorter if I remember correctly. Maybe someone else who knows for sure can chime in. __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

06-21-2014, 07:43 PM	#60
oilyrag80 Registered User Join Date: Jul 2006 Location: Tucson Az Posts: 1,695	Re: parting out 67 swb Ok this is pretty much it for the small stuff fender emblems nice shape all studs are good $37 shipped door panels no rust nice shape $65 shipped 67 vent windows pass side is good shape driver side needs some work both need rubber $75 shipped 67 dash cut out ash tray is tight $50 shipped let me know James Attached Images __________________ check out my crew cab build http://67-72chevytrucks.com/vboard/s...d.php?t=557019

08-04-2014, 10:33 AM	#62
gotztofly Registered User Join Date: Aug 2014 Location: Gilbert Posts: 6	Re: parting out 67 swb You still have the front fenders and hood?

08-04-2014, 10:35 AM	#63
gotztofly Registered User Join Date: Aug 2014 Location: Gilbert Posts: 6	Re: parting out 67 swb Do you also still have the vent windows?

08-04-2014, 11:07 AM	#64
mrweld Registered User Join Date: Feb 2013 Location: Ten Mile Tennessee Posts: 73	Re: parting out 67 swb Will you take $100 for dash cut out and door panels shipped to 37303?

08-04-2014, 05:35 PM	#65
Nola67 Registered User Join Date: Feb 2014 Location: New Orleans la Posts: 27	Re: parting out 67 swb How is the radiator core support? __________________ 67 small window swb 98 bagged s10 (orig owner) 99 z71 01 swb

08-04-2014, 06:12 PM	#66
vweater2001 Registered User Join Date: Sep 2013 Location: Lakeview Terrace Posts: 190	Re: parting out 67 swb I'd be interested in the reverse lights including all the brackets, wiring to the tranny and the switch to tranny as well? Let me know how much for that including shipping to 91331. Mando __________________ "If you aint first your last!!" 1969 GMC C1500 Stepside Shortbed - daily driver Mando

08-05-2014, 10:56 PM	#67
burb71 Active Member Join Date: Oct 2002 Location: Ft. Myers, Fl Posts: 1,716	Re: parting out 67 swb I need the little light bulb socket and a few inches of the wire that went to light up the heater control Last edited by burb71; 08-06-2014 at 11:06 AM.

08-06-2014, 09:23 AM	#68
Shortstep67 Registered User Join Date: May 2012 Location: San Antonio, Texas Posts: 6	Re: parting out 67 swb Interested in rear driver's side fender, let me know price and shipping. Thanks

08-12-2014, 07:18 PM	#69
angelo_32806 Registered User Join Date: May 2009 Location: Orlando FL Posts: 107	Re: parting out 67 swb Do you have a title?

09-03-2014, 04:08 PM	#70
gotztofly Registered User Join Date: Aug 2014 Location: Gilbert Posts: 6	Re: parting out 67 swb How is the hood? how much ? thanks

09-03-2014, 07:26 PM	#71
jerrya59 Registered User Join Date: Nov 2013 Location: Gilbert Arizona Posts: 30	Re: parting out 67 swb are the fenders emblems still availabe and are they $37 for the pair? If so I will take them __________________ 67 K10 4X4 LWB 4inch lift 350/sm420 4sp/ t221 t/c 65 Mustang 2+2 fastback 289/5sp manual 79 CJ7 4x4 inline 6 / 4inch lift 33" 2014 Tahoe (wifes ride)

09-03-2014, 09:06 PM	#72
zicc1835 Senior Member Join Date: Mar 2011 Location: Hanover NJ Posts: 4,252	Re: parting out 67 swb 2nd on the fender emblems if they get to me __________________ Doc & Kim build http://67-72chevytrucks.com/vboard/s...d.php?t=722288 I am from the desert http://67-72chevytrucks.com/vboard/s...d.php?t=650332 basket case build SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=648557



Register or Log In To remove these advertisements.

04-02-2015, 09:28 AM	#74
seth7843 Registered User Join Date: Jun 2013 Location: Norman, OK Posts: 52	Re: parting out 67 swb Do you still have the gauge cluster for sale?

04-02-2015, 04:46 PM	#75
JG67 Registered User Join Date: Dec 2013 Location: Phoenix Posts: 87	Re: parting out 67 swb Do you still have the 67 passenger fender. I'm interested. I'm in Phoenix. Thanks Julian

Register or Log In To remove these advertisements.