GA 2002 2500HD parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chuckmc8 · 07-04-2014, 01:53 PM

From 2wd 6.0 truck 2002 model 2500HD

a/c comp $75

both airbags $150

heater a/c control $40

instrument panel $75

radiator coolant tank $35

radiator $50

a/c condenser $40

I can ship the small items. I'm located 20 miles west of Atlanta on I-20

chuckmc8 · 07-13-2014, 06:04 PM

ttt

Vintage Windmills · 07-13-2014, 06:14 PM

hows the grille? also fender flares?

Undone · 08-05-2014, 07:56 PM

Do you have the Engine stands from this truck?

chuckmc8 · 08-06-2014, 04:57 PM

Yes I have them

Undone · 08-06-2014, 06:56 PM

This was the 6.0 engine correct? How much with shipping to 30530?

chuckmc8 · 08-06-2014, 07:28 PM

It was a 6.0 and 4L80E 2wd. Ill take $40 for the mounts. I think they will fit in a medium flat rate priority box for $15- So, $55 to your door. Here is twisted pics of them (sorry) If you want them, shoot me a PM for paypal addy

Vintage Windmills · 08-06-2014, 08:52 PM

how about the parts I asked about?

chuckmc8 · 08-06-2014, 09:09 PM

Quote:

Originally Posted by Vintage Windmills

how about the parts I asked about?

I don't have those parts. I apologize for not responding

**w314speed** · 08-23-2014, 08:59 AM

Is the rear end a 9.5 or 10.5 and gear ratio? Thanks, Dan

chuckmc8 · 08-23-2014, 10:51 AM

the PO said it was a full floater G80 limited slip with 4:10 gears. I dont know anything about these as to if its a 9.5 or 10.5. You are welcome to ride over and check it out

**w314speed** · 08-24-2014, 11:08 AM

If the pinion bolts in the front of the housing, it is a 10.5.

chuckmc8 · 08-24-2014, 02:09 PM

Quote:

Originally Posted by w314speed

If the pinion bolts in the front of the housing, it is a 10.5.

here is a pic

chuckmc8 · 08-24-2014, 05:39 PM

another pic

**w314speed** · 08-25-2014, 07:58 AM

If you don't sell the complete rolling chassis, I would be interested in the complete rear end assy with all brake cables and hoses and the spare tire and wheel. Thanks, Dan

chuckmc8 · 08-25-2014, 08:03 AM

$550 for complete rear end assy with all brake cables and hoses and the spare tire and wheel

**w314speed** · 08-26-2014, 05:15 AM

Thanks for the offer. That's more than I would spend for those items. Thanks, Dan

chuckmc8 · 08-26-2014, 06:12 AM

Thats fine, thanks. TTT

chuckmc8 · 08-31-2014, 05:34 AM

TTT This disc brake differential goes for $650 in local yards

PT'S 70 CST · 09-02-2014, 12:03 PM

Can I get a pic of the instrument panel and do you know how many miles it has on it.

Thanks, PT

chuckmc8 · 09-02-2014, 12:14 PM

Here's a pic of the panel. The truck had about 179K or close. I thought the mileage was stored in the PCM and the cluster was just a display. Is that incorrect?

PT'S 70 CST · 09-02-2014, 12:58 PM

I am not sure. I have some lights out on my 2004 Denali panel and want to pull it to take it to a guy to fix them but did not want to be without my Denali for a week. Is the mileage stored on a PCM or if I take out the dash will it stay as is on mine until I put it back in. I guess I need to know this before I do what I am thinking of. I do not want to break any kind of laws or anything.

PT

chuckmc8 · 09-02-2014, 01:52 PM

If its just the bulbs, they are super easy to replace- I snapped a few pics of this panel with the bulbs accessed

**Dave** · 09-02-2014, 02:17 PM

I'll take the dash if PT doesn't. I need one for my 2002. LMK, thanks Dave.

PT'S 70 CST · 09-02-2014, 03:20 PM

Mine was more than just the bulb because I took it to the dealership and he was talking about having to solder something. So I will take it and if you do not mind pm me your paypal address.

PT

07-04-2014, 01:53 PM	#1
chuckmc8 It's alsways something..... Join Date: Nov 2008 Location: Douglasville GA Posts: 1,171	2002 2500HD parts From 2wd 6.0 truck 2002 model 2500HD a/c comp $75 both airbags $150 heater a/c control $40 instrument panel $75 radiator coolant tank $35 radiator $50 a/c condenser $40 I can ship the small items. I'm located 20 miles west of Atlanta on I-20 __________________ 1968 RS Camaro 'Vert Matching number 327 and M21 Muncie 1968 C10 Black with red interior and orig paint. 5.3 / 4l60e,3:73 POSI 17" Torq Thrusts 1968 CST 514 Red with black interior. Buddy Buckets, Factory A/C, PS, PB- 20" AR custom shop TT, 5.3 and 4l60e Last edited by chuckmc8; 01-21-2015 at 06:33 AM.

07-13-2014, 06:04 PM	#2
chuckmc8 It's alsways something..... Join Date: Nov 2008 Location: Douglasville GA Posts: 1,171	Re: 2002 2500HD parts ttt __________________ 1968 RS Camaro 'Vert Matching number 327 and M21 Muncie 1968 C10 Black with red interior and orig paint. 5.3 / 4l60e,3:73 POSI 17" Torq Thrusts 1968 CST 514 Red with black interior. Buddy Buckets, Factory A/C, PS, PB- 20" AR custom shop TT, 5.3 and 4l60e

07-13-2014, 06:14 PM	#3
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: 2002 2500HD parts hows the grille? also fender flares? __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

08-05-2014, 07:56 PM	#4
Undone Registered User Join Date: Aug 2010 Location: commerce ga Posts: 896	Re: 2002 2500HD parts Do you have the Engine stands from this truck?

08-06-2014, 04:57 PM	#5
chuckmc8 It's alsways something..... Join Date: Nov 2008 Location: Douglasville GA Posts: 1,171	Re: 2002 2500HD parts Yes I have them __________________ 1968 RS Camaro 'Vert Matching number 327 and M21 Muncie 1968 C10 Black with red interior and orig paint. 5.3 / 4l60e,3:73 POSI 17" Torq Thrusts 1968 CST 514 Red with black interior. Buddy Buckets, Factory A/C, PS, PB- 20" AR custom shop TT, 5.3 and 4l60e

08-06-2014, 06:56 PM	#6
Undone Registered User Join Date: Aug 2010 Location: commerce ga Posts: 896	Re: 2002 2500HD parts This was the 6.0 engine correct? How much with shipping to 30530?

08-06-2014, 07:28 PM	#7
chuckmc8 It's alsways something..... Join Date: Nov 2008 Location: Douglasville GA Posts: 1,171	Re: 2002 2500HD parts It was a 6.0 and 4L80E 2wd. Ill take $40 for the mounts. I think they will fit in a medium flat rate priority box for $15- So, $55 to your door. Here is twisted pics of them (sorry) If you want them, shoot me a PM for paypal addy Attached Images __________________ 1968 RS Camaro 'Vert Matching number 327 and M21 Muncie 1968 C10 Black with red interior and orig paint. 5.3 / 4l60e,3:73 POSI 17" Torq Thrusts 1968 CST 514 Red with black interior. Buddy Buckets, Factory A/C, PS, PB- 20" AR custom shop TT, 5.3 and 4l60e

08-06-2014, 08:52 PM	#8
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: 2002 2500HD parts how about the parts I asked about? __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

08-23-2014, 08:59 AM	#10
w314speed Senior Member Join Date: Jun 2005 Location: atlanta Posts: 2,315	Re: 2002 2500HD parts Is the rear end a 9.5 or 10.5 and gear ratio? Thanks, Dan

08-23-2014, 10:51 AM	#11
chuckmc8 It's alsways something..... Join Date: Nov 2008 Location: Douglasville GA Posts: 1,171	Re: 2002 2500HD parts the PO said it was a full floater G80 limited slip with 4:10 gears. I dont know anything about these as to if its a 9.5 or 10.5. You are welcome to ride over and check it out __________________ 1968 RS Camaro 'Vert Matching number 327 and M21 Muncie 1968 C10 Black with red interior and orig paint. 5.3 / 4l60e,3:73 POSI 17" Torq Thrusts 1968 CST 514 Red with black interior. Buddy Buckets, Factory A/C, PS, PB- 20" AR custom shop TT, 5.3 and 4l60e

08-24-2014, 11:08 AM	#12
w314speed Senior Member Join Date: Jun 2005 Location: atlanta Posts: 2,315	Re: 2002 2500HD parts If the pinion bolts in the front of the housing, it is a 10.5.

08-24-2014, 05:39 PM	#14
chuckmc8 It's alsways something..... Join Date: Nov 2008 Location: Douglasville GA Posts: 1,171	Re: 2002 2500HD parts another pic Attached Images __________________ 1968 RS Camaro 'Vert Matching number 327 and M21 Muncie 1968 C10 Black with red interior and orig paint. 5.3 / 4l60e,3:73 POSI 17" Torq Thrusts 1968 CST 514 Red with black interior. Buddy Buckets, Factory A/C, PS, PB- 20" AR custom shop TT, 5.3 and 4l60e

08-25-2014, 07:58 AM	#15
w314speed Senior Member Join Date: Jun 2005 Location: atlanta Posts: 2,315	Re: 2002 2500HD parts If you don't sell the complete rolling chassis, I would be interested in the complete rear end assy with all brake cables and hoses and the spare tire and wheel. Thanks, Dan

08-25-2014, 08:03 AM	#16
chuckmc8 It's alsways something..... Join Date: Nov 2008 Location: Douglasville GA Posts: 1,171	Re: 2002 2500HD parts $550 for complete rear end assy with all brake cables and hoses and the spare tire and wheel __________________ 1968 RS Camaro 'Vert Matching number 327 and M21 Muncie 1968 C10 Black with red interior and orig paint. 5.3 / 4l60e,3:73 POSI 17" Torq Thrusts 1968 CST 514 Red with black interior. Buddy Buckets, Factory A/C, PS, PB- 20" AR custom shop TT, 5.3 and 4l60e

08-26-2014, 05:15 AM	#17
w314speed Senior Member Join Date: Jun 2005 Location: atlanta Posts: 2,315	Re: 2002 2500HD parts Thanks for the offer. That's more than I would spend for those items. Thanks, Dan



Register or Log In To remove these advertisements.

08-26-2014, 06:12 AM	#18
chuckmc8 It's alsways something..... Join Date: Nov 2008 Location: Douglasville GA Posts: 1,171	Re: 2002 2500HD parts Thats fine, thanks. TTT __________________ 1968 RS Camaro 'Vert Matching number 327 and M21 Muncie 1968 C10 Black with red interior and orig paint. 5.3 / 4l60e,3:73 POSI 17" Torq Thrusts 1968 CST 514 Red with black interior. Buddy Buckets, Factory A/C, PS, PB- 20" AR custom shop TT, 5.3 and 4l60e

08-31-2014, 05:34 AM	#19
chuckmc8 It's alsways something..... Join Date: Nov 2008 Location: Douglasville GA Posts: 1,171	Re: 2002 2500HD parts TTT This disc brake differential goes for $650 in local yards __________________ 1968 RS Camaro 'Vert Matching number 327 and M21 Muncie 1968 C10 Black with red interior and orig paint. 5.3 / 4l60e,3:73 POSI 17" Torq Thrusts 1968 CST 514 Red with black interior. Buddy Buckets, Factory A/C, PS, PB- 20" AR custom shop TT, 5.3 and 4l60e

09-02-2014, 12:03 PM	#20
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: 2002 2500HD parts Can I get a pic of the instrument panel and do you know how many miles it has on it. Thanks, PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

09-02-2014, 12:14 PM	#21
chuckmc8 It's alsways something..... Join Date: Nov 2008 Location: Douglasville GA Posts: 1,171	Re: 2002 2500HD parts Here's a pic of the panel. The truck had about 179K or close. I thought the mileage was stored in the PCM and the cluster was just a display. Is that incorrect? Attached Images __________________ 1968 RS Camaro 'Vert Matching number 327 and M21 Muncie 1968 C10 Black with red interior and orig paint. 5.3 / 4l60e,3:73 POSI 17" Torq Thrusts 1968 CST 514 Red with black interior. Buddy Buckets, Factory A/C, PS, PB- 20" AR custom shop TT, 5.3 and 4l60e

09-02-2014, 12:58 PM	#22
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: 2002 2500HD parts I am not sure. I have some lights out on my 2004 Denali panel and want to pull it to take it to a guy to fix them but did not want to be without my Denali for a week. Is the mileage stored on a PCM or if I take out the dash will it stay as is on mine until I put it back in. I guess I need to know this before I do what I am thinking of. I do not want to break any kind of laws or anything. PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

09-02-2014, 01:52 PM	#23
chuckmc8 It's alsways something..... Join Date: Nov 2008 Location: Douglasville GA Posts: 1,171	Re: 2002 2500HD parts If its just the bulbs, they are super easy to replace- I snapped a few pics of this panel with the bulbs accessed Attached Images __________________ 1968 RS Camaro 'Vert Matching number 327 and M21 Muncie 1968 C10 Black with red interior and orig paint. 5.3 / 4l60e,3:73 POSI 17" Torq Thrusts 1968 CST 514 Red with black interior. Buddy Buckets, Factory A/C, PS, PB- 20" AR custom shop TT, 5.3 and 4l60e

09-02-2014, 02:17 PM	#24
Dave DND Trucks Join Date: Dec 1999 Location: NW Indiana Posts: 2,397	Re: 2002 2500HD parts I'll take the dash if PT doesn't. I need one for my 2002. LMK, thanks Dave.

09-02-2014, 03:20 PM	#25
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: 2002 2500HD parts Mine was more than just the bulb because I took it to the dealership and he was talking about having to solder something. So I will take it and if you do not mind pm me your paypal address. PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

Register or Log In To remove these advertisements.