NC 67-72 Headers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

fulltroy · 07-18-2014, 04:08 PM

These are new but a few years old but have never been run. I don't know know who makes them but they were on a 2wd truck. 125 obo local pickup. They do have some surface rust that may or may not clean up.

fulltroy · 07-22-2014, 03:51 PM

Price reduced $100

chubinit · 07-22-2014, 09:34 PM

Approximately where is the rust located on the headers? I.e., if they'll look good with the hood open, I'm interested.
Thanks,
chubinit

fulltroy · 07-23-2014, 01:21 PM

Most of the rust is located where it will be seen.

Marcello D'Ottavio · 07-23-2014, 01:59 PM

Do you still have these for sale? if so, can you box them up for shipment?

fulltroy · 07-23-2014, 02:02 PM

I do have them but I think shipping would be pretty costly because of the size.

chubinit · 07-23-2014, 08:39 PM

fulltroy,
I'll take the headers for $100 if you don't mind keeping them until I travel up to your area in the next 2 to 3 weeks. Or I may have a friend pick them up and get 'em from him. One question; these appear to be chrome, are they?

fulltroy · 07-23-2014, 08:46 PM

Quote:

Originally Posted by chubinit

fulltroy,
I'll take the headers for $100 if you don't mind keeping them until I travel up to your area in the next 2 to 3 weeks. Or I may have a friend pick them up and get 'em from him. One question; these appear to be chrome, are they?

I believe they are ceramic coated or it could be high temp paint but it's not chrome. I can hold them for a few weeks they don't take up much space.

chubinit · 07-23-2014, 10:18 PM

OK fulltroy, it's a deal. I or the friend will pay cash when picked up. Are we good? If so, please send me a physical address (for GPS) and a contact number to hazmatek@gmail.com.
Thank you,
chubinit

fulltroy · 07-24-2014, 03:56 PM

I'll send you a pm

fulltroy · 08-14-2014, 01:42 PM

These are available again..... Will NOT hold for anyone else without money!

bk04z66 · 08-14-2014, 06:33 PM

I am interested, can you confirm they are ceramic coated, also what diameter are the primary tubes? When you had them installed how far did they hang down past the trucks frame? I am close to you so picking them up is not a problem

fulltroy · 08-15-2014, 01:15 AM

I cannot confirm the finish. They look ceramic coated but I'm not positive. Primary tubes are 1.5 inches outside diameter. I didn't measure them on the truck so I don't know how far they hung down.

jeffg1010 · 08-17-2014, 01:00 AM

I'll take them for $100. Do you work in Charlotte as well? Could I meet up with ya sometime during the day? I live/work in Mooresville, but travel into the city some for work. They are for a 350 right? Thanks - Jeff

fulltroy · 08-17-2014, 03:06 AM

Quote:

Originally Posted by jeffg1010

I'll take them for $100. Do you work in Charlotte as well? Could I meet up with ya sometime during the day? I live/work in Mooresville, but travel into the city some for work. They are for a 350 right? Thanks - Jeff

Headers will fit a 350. Yes, I live and work in Charlotte. If you give me notice of when you'll be down I have a pretty flexible schedule.

jeffg1010 · 08-18-2014, 08:22 AM

Can you PM me a phone #? I may be down that way tomorrow afternoon.
Thanks Jeff

fulltroy · 08-18-2014, 11:25 AM

Pm sent

fulltroy · 08-27-2014, 12:42 PM

Sold!

07-18-2014, 04:08 PM	#1
fulltroy Registered User Join Date: Sep 2012 Location: Charlotte Posts: 101	67-72 Headers These are new but a few years old but have never been run. I don't know know who makes them but they were on a 2wd truck. 125 obo local pickup. They do have some surface rust that may or may not clean up. Attached Images

07-22-2014, 03:51 PM	#2
fulltroy Registered User Join Date: Sep 2012 Location: Charlotte Posts: 101	Re: 67-72 Headers Price reduced $100

07-22-2014, 09:34 PM	#3
chubinit Registered User Join Date: May 2012 Location: Williamston, NC Posts: 37	Re: 67-72 Headers Approximately where is the rust located on the headers? I.e., if they'll look good with the hood open, I'm interested. Thanks, chubinit

07-23-2014, 01:21 PM	#4
fulltroy Registered User Join Date: Sep 2012 Location: Charlotte Posts: 101	Re: 67-72 Headers Most of the rust is located where it will be seen. Last edited by fulltroy; 07-23-2014 at 08:44 PM.

07-23-2014, 01:59 PM	#5
Marcello D'Ottavio Registered User Join Date: Jul 2012 Location: Winnipeg, Manitoba, Canada Posts: 18	Re: 67-72 Headers Do you still have these for sale? if so, can you box them up for shipment?

07-23-2014, 02:02 PM	#6
fulltroy Registered User Join Date: Sep 2012 Location: Charlotte Posts: 101	Re: 67-72 Headers I do have them but I think shipping would be pretty costly because of the size.

07-23-2014, 08:39 PM	#7
chubinit Registered User Join Date: May 2012 Location: Williamston, NC Posts: 37	Re: 67-72 Headers fulltroy, I'll take the headers for $100 if you don't mind keeping them until I travel up to your area in the next 2 to 3 weeks. Or I may have a friend pick them up and get 'em from him. One question; these appear to be chrome, are they?

07-23-2014, 10:18 PM	#9
chubinit Registered User Join Date: May 2012 Location: Williamston, NC Posts: 37	Re: 67-72 Headers OK fulltroy, it's a deal. I or the friend will pay cash when picked up. Are we good? If so, please send me a physical address (for GPS) and a contact number to hazmatek@gmail.com. Thank you, chubinit

07-24-2014, 03:56 PM	#10
fulltroy Registered User Join Date: Sep 2012 Location: Charlotte Posts: 101	Re: 67-72 Headers I'll send you a pm

08-14-2014, 01:42 PM	#11
fulltroy Registered User Join Date: Sep 2012 Location: Charlotte Posts: 101	Re: 67-72 Headers These are available again..... Will NOT hold for anyone else without money!

08-14-2014, 06:33 PM	#12
bk04z66 Registered User Join Date: Jun 2012 Location: mebane,nc Posts: 120	Re: 67-72 Headers I am interested, can you confirm they are ceramic coated, also what diameter are the primary tubes? When you had them installed how far did they hang down past the trucks frame? I am close to you so picking them up is not a problem

08-15-2014, 01:15 AM	#13
fulltroy Registered User Join Date: Sep 2012 Location: Charlotte Posts: 101	Re: 67-72 Headers I cannot confirm the finish. They look ceramic coated but I'm not positive. Primary tubes are 1.5 inches outside diameter. I didn't measure them on the truck so I don't know how far they hung down.

08-17-2014, 01:00 AM	#14
jeffg1010 Registered User Join Date: Aug 2010 Location: Mooresville, NC Posts: 2,677	Re: 67-72 Headers I'll take them for $100. Do you work in Charlotte as well? Could I meet up with ya sometime during the day? I live/work in Mooresville, but travel into the city some for work. They are for a 350 right? Thanks - Jeff __________________ Jeff 1972 Blazer CST 2wd- My son Sam's Project "S" Project "S" 1970 Suburban - SOLD "One Bad Burb" Photobucket Album 1986 C30 Crewcab - 63K original miles, original paint Members I have met: mikey531, gcburdic, bashed, burbman69, TonyPieras, Blazester, GCncsuHD, custombuilt67-72, tsnow678, highrpm, PanelDeland, tanman722001, 47thriftmaster, babyblueoval, 68stepbed, JesseWebb, Andy4639, xs-style, TobyArnot, BigOrange, frednoah, brn_agn, k5hart, Graham57a, bhelton, AJohn6, SilverC10, 69CST, '71 Flame, RaceAGMC, Liz, Josh, MattPSU, 68corvair, Chevy350V8, mdeal, ccrorymc, mrhurt73, dmxxpert, Custom68, 84GMC, BionicABs1, BigBlockBurris, Ebfabman, ATP...

08-18-2014, 08:22 AM	#16
jeffg1010 Registered User Join Date: Aug 2010 Location: Mooresville, NC Posts: 2,677	Re: 67-72 Headers Can you PM me a phone #? I may be down that way tomorrow afternoon. Thanks Jeff __________________ Jeff 1972 Blazer CST 2wd- My son Sam's Project "S" Project "S" 1970 Suburban - SOLD "One Bad Burb" Photobucket Album 1986 C30 Crewcab - 63K original miles, original paint Members I have met: mikey531, gcburdic, bashed, burbman69, TonyPieras, Blazester, GCncsuHD, custombuilt67-72, tsnow678, highrpm, PanelDeland, tanman722001, 47thriftmaster, babyblueoval, 68stepbed, JesseWebb, Andy4639, xs-style, TobyArnot, BigOrange, frednoah, brn_agn, k5hart, Graham57a, bhelton, AJohn6, SilverC10, 69CST, '71 Flame, RaceAGMC, Liz, Josh, MattPSU, 68corvair, Chevy350V8, mdeal, ccrorymc, mrhurt73, dmxxpert, Custom68, 84GMC, BionicABs1, BigBlockBurris, Ebfabman, ATP...

08-18-2014, 11:25 AM	#17
fulltroy Registered User Join Date: Sep 2012 Location: Charlotte Posts: 101	Re: 67-72 Headers Pm sent



Register or Log In To remove these advertisements.

08-27-2014, 12:42 PM	#18
fulltroy Registered User Join Date: Sep 2012 Location: Charlotte Posts: 101	Re: 67-72 Headers Sold!

Register or Log In To remove these advertisements.