1953 chevrolet 3100 hood emblem clips - The 1947 - Present Chevrolet & GMC Truck Message Board Network

metalmen · 07-22-2014, 03:54 PM

i have a good hood emblem off my 53 3100, the clips rotted off does someone make clips to to remount it?

crossfire84 · 07-22-2014, 05:02 PM

ace hardware. $.25 each.

b.sharp · 07-23-2014, 09:34 AM

my clips are completely gone also. I would like to see the ones from ace hardware. I doubt it has the formed metal to fit the emblem. Just a crew is what I am thinking. We will probably have to remake the sheetmetal piece from scratch.

metalmen · 07-23-2014, 11:13 AM

yea you would figure someone would repop them by now

b.sharp · 07-23-2014, 01:40 PM

I will be attending the street rod nationals next weekend. If I run across a vendor that has them I will let you know how to order a set. There should be plenty of people selling parts for these trucks.

metalmen · 07-23-2014, 04:45 PM

great thanks

crossfire84 · 07-23-2014, 08:37 PM

Quote:

Originally Posted by b.sharp

my clips are completely gone also. I would like to see the ones from ace hardware. I doubt it has the formed metal to fit the emblem. Just a crew is what I am thinking. We will probably have to remake the sheetmetal piece from scratch.

well here ya go!

Donaldo · 07-23-2014, 11:34 PM

Are you talking about the front stainless 'Chevrolet' ornament or the 3100 badges on the sides ?

I have an earlier '48 cast metal center ornament that has 4 bosses and screws for mounting, and the '51 had a stamped stainless center piece with 4 steel mounting pieces welded in place - these rust apart. I replaced the steel with some ss flat stock and tig'd in in place with some silicone bronze rod - it doesn't req' a lot of heat.

metalmen · 07-24-2014, 11:19 AM

yea nice fab work on that, i wonder why no one repops them clips, since the stainless last forever

b.sharp · 07-24-2014, 02:35 PM

yep, that would be the pieces I need. Not the little round clip on for the stud. I don't have anything but the emblem. Everything in the back has long rusted away. My emblem is not really worth messing with, it's really pitted on the front and has a couple of holes but it was free and a buddy of mine gave it to me. It will likely become wall art and I will look for a better one to put on my truck.

**mr48chev** · 07-24-2014, 05:22 PM

The ones crossfire84 showed should work but Running down to ACE and going through those pull out drawers above the bolt bins might be pretty productive. Or stop by Fasteners if there is one locally with one of the emblems. A search shows that Honda uses a similar clip on some hood ornaments but no idea of the size.

Henney · 04-01-2015, 11:24 AM

Reviving this. Did anyone make any good headway finding hardware?

b.sharp · 04-02-2015, 11:47 AM

no luck finding replacement tabs. I need the correct emblem for my '50. I found one for a later model but the steel tab pieces have rotted away. I need to make some or figure out a mounting system. I just have way to many other things to worry about right now. The emblem is very low on the to do list.

07-22-2014, 03:54 PM	#1
metalmen Registered User Join Date: Nov 2009 Location: williamstown nj Posts: 32	1953 chevrolet 3100 hood emblem clips i have a good hood emblem off my 53 3100, the clips rotted off does someone make clips to to remount it?

07-22-2014, 05:02 PM	#2
crossfire84 Registered User Join Date: Jun 2012 Location: wind lake WI Posts: 1,750	Re: 1953 chevrolet 3100 hood emblem clips ace hardware. $.25 each. __________________ LIL ERV the 50-3600 396 BBC stroked to 415 cid Richmond 6spd over drive C4 rear Porter built a arms Never give the Devil a ride,because he'll want to Drive!

07-23-2014, 09:34 AM	#3
b.sharp Registered User Join Date: May 2006 Location: Frankfort, Kentucky Posts: 508	Re: 1953 chevrolet 3100 hood emblem clips my clips are completely gone also. I would like to see the ones from ace hardware. I doubt it has the formed metal to fit the emblem. Just a crew is what I am thinking. We will probably have to remake the sheetmetal piece from scratch.

07-23-2014, 11:13 AM	#4
metalmen Registered User Join Date: Nov 2009 Location: williamstown nj Posts: 32	Re: 1953 chevrolet 3100 hood emblem clips yea you would figure someone would repop them by now

07-23-2014, 01:40 PM	#5
b.sharp Registered User Join Date: May 2006 Location: Frankfort, Kentucky Posts: 508	Re: 1953 chevrolet 3100 hood emblem clips I will be attending the street rod nationals next weekend. If I run across a vendor that has them I will let you know how to order a set. There should be plenty of people selling parts for these trucks.

07-23-2014, 04:45 PM	#6
metalmen Registered User Join Date: Nov 2009 Location: williamstown nj Posts: 32	Re: 1953 chevrolet 3100 hood emblem clips great thanks

07-23-2014, 11:34 PM	#8
Donaldo Registered User Join Date: Sep 2013 Location: Morro Bay, California Posts: 447	Re: 1953 chevrolet 3100 hood emblem clips Are you talking about the front stainless 'Chevrolet' ornament or the 3100 badges on the sides ? I have an earlier '48 cast metal center ornament that has 4 bosses and screws for mounting, and the '51 had a stamped stainless center piece with 4 steel mounting pieces welded in place - these rust apart. I replaced the steel with some ss flat stock and tig'd in in place with some silicone bronze rod - it doesn't req' a lot of heat. Attached Images __________________ Thanks, Don http://www.donsbirds.com/pick-up

07-24-2014, 11:19 AM	#9
metalmen Registered User Join Date: Nov 2009 Location: williamstown nj Posts: 32	Re: 1953 chevrolet 3100 hood emblem clips yea nice fab work on that, i wonder why no one repops them clips, since the stainless last forever

07-24-2014, 02:35 PM	#10
b.sharp Registered User Join Date: May 2006 Location: Frankfort, Kentucky Posts: 508	Re: 1953 chevrolet 3100 hood emblem clips yep, that would be the pieces I need. Not the little round clip on for the stud. I don't have anything but the emblem. Everything in the back has long rusted away. My emblem is not really worth messing with, it's really pitted on the front and has a couple of holes but it was free and a buddy of mine gave it to me. It will likely become wall art and I will look for a better one to put on my truck.

07-24-2014, 05:22 PM	#11
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,708	Re: 1953 chevrolet 3100 hood emblem clips The ones crossfire84 showed should work but Running down to ACE and going through those pull out drawers above the bolt bins might be pretty productive. Or stop by Fasteners if there is one locally with one of the emblems. A search shows that Honda uses a similar clip on some hood ornaments but no idea of the size. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

04-01-2015, 11:24 AM	#12
Henney Registered User Join Date: Sep 2014 Location: Portland, OR Posts: 133	Re: 1953 chevrolet 3100 hood emblem clips Reviving this. Did anyone make any good headway finding hardware?

04-02-2015, 11:47 AM	#13
b.sharp Registered User Join Date: May 2006 Location: Frankfort, Kentucky Posts: 508	Re: 1953 chevrolet 3100 hood emblem clips no luck finding replacement tabs. I need the correct emblem for my '50. I found one for a later model but the steel tab pieces have rotted away. I need to make some or figure out a mounting system. I just have way to many other things to worry about right now. The emblem is very low on the to do list.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.