Who's heard of Felix Chevrolet??? - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

likaroc13 · 08-06-2014, 08:34 PM

Quote:

Originally Posted by KevsClassics

Ok what you guys think?

Looks great!

ready2go69 · 08-06-2014, 08:45 PM

Would be nice if your stripe/sign guy could give a online lesson on this great work. He has our attention.

Great job

**argonaut** · 08-07-2014, 04:30 AM

Some I like lowered but this one I think looked better stock height.

hemi jim · 08-07-2014, 03:21 PM

The stance for this particular truck is cool.............

Sick5 · 08-07-2014, 04:45 PM

not bad for a static drop

**Ol Blue K20** · 08-07-2014, 04:58 PM

Looks great. ...

**KevsClassics** · 08-07-2014, 06:51 PM

Went down one more inch in rear as per Rene's request with CPP 1" blocks also installed CPP bolt in C-notch.

NEWFISHER · 08-07-2014, 07:28 PM

It's missing a 63 grille hahaha

**KevsClassics** · 08-07-2014, 10:04 PM

Quote:

Originally Posted by NEWFISHER

It's missing a 63 grille hahaha

Please don't give him any ideas.

Jeff La · 08-07-2014, 11:25 PM

Quote:

Originally Posted by NEWFISHER

It's missing a 63 grille hahaha

I'm sure he has a dozen or so to use

**lolife99** · 08-08-2014, 12:52 AM

Looks perfect!

doobiebro · 08-08-2014, 09:33 AM

Looking good Rene!

jchav62 · 08-08-2014, 09:52 AM

That thing is awesome! Jealous again....

seanrolandwood · 08-09-2014, 11:38 AM

Sacramento swap meet 155 for the set

corvettejim1968 · 08-09-2014, 01:27 PM

i have seen two of these now in the last month

**KevsClassics** · 08-09-2014, 04:25 PM

Quote:

Originally Posted by seanrolandwood

Sacramento swap meet 155 for the set

Rene was at the Sacramento swap this morning. Can't beleive his sharp eye missed them.

seanrolandwood · 08-09-2014, 05:05 PM

Just in case there was some confusion I posted to help rene get them for the truck I did not buy... guy had more than one set those were the better of the two

scuderia · 08-10-2014, 12:31 PM

Quote:

Originally Posted by seanrolandwood

Just in case there was some confusion I posted to help rene get them for the truck I did not buy... guy had more than one set those were the better of the two

guessing he'll want the worse of the two...

C/10 King · 08-10-2014, 02:47 PM

Quote:

Originally Posted by NEWFISHER

Welcome to California.

Thanks Jon, got back from Oregon late Fri night, what a beautiful place!!!!

Quote:

Originally Posted by likaroc13

Very cool Rene! Look forward to seeing it with an altitude adjustment. Btw, you didn't have me fooled.

I read that first post & was trying to figure out why some folks hadn't caught on yet.

Quote:

Originally Posted by Ol Blue K20

Dang it Rene. ....you had me fooled..guess I need to wear boots when I talk to ya....with all the #### you shovel......

Tall boots!!!!

Quote:

Originally Posted by scuderia

Like this??

Yup, just like that!

Quote:

Originally Posted by LostMy65

Me too!
I was wondering how this dude kept finding all these.
C10 Jester

That has a nice ring to it.

Quote:

Originally Posted by 66Gilbert

How cool it would be to own that truck or any 60's truck purchased from Felix Chevrolet. Check out some Felix memorabilia from ebay.

Very cool stuff.

Quote:

Originally Posted by scuderia

Not to hijack the thread but since we are talking of old California dealers... my truck was sold at Friendly Chevrolet in Escalon CA (about an hour from Fremont where it was built). Seems they went under in 2008. Anyone one know anything about the dealership?

I might have a set of their frames here somewhere.

Quote:

Originally Posted by KevsClassics

Ok what you guys think?

Love it!!!!!

C/10 King · 08-10-2014, 03:01 PM

Quote:

Originally Posted by likaroc13

Looks great!

Thanks Phillip!

Quote:

Originally Posted by ready2go69

Would be nice if your stripe/sign guy could give a online lesson on this great work. He has our attention.

Great job

Wait till you see the next truck!

Quote:

Originally Posted by argonaut

Some I like lowered but this one I think looked better stock height.

Jason, you must be related to Raider Rudy.

Quote:

Originally Posted by hemi jim

The stance for this particular truck is cool.............

Thanks Jim, I just saw you on TV!

Quote:

Originally Posted by Sick5

not bad for a static drop

Quote:

Originally Posted by Ol Blue K20

Looks great. ...

Quote:

Originally Posted by KevsClassics

Went down one more inch in rear as per Rene's request with CPP 1" blocks also installed CPP bolt in C-notch.

My god, you improved it!

Quote:

Originally Posted by NEWFISHER

It's missing a 63 grille hahaha

I noticed that too.

Quote:

Originally Posted by Jeff La

I'm sure he has a dozen or so to use

1/2 dozen.

Quote:

Originally Posted by lolife99

Looks perfect!

Quote:

Originally Posted by doobiebro

Looking good Rene!

Quote:

Originally Posted by jchav62

That thing is awesome! Jealous again....

Thanks so much guys!!!!

Quote:

Originally Posted by seanrolandwood

Sacramento swap meet 155 for the set

Yes, I dropped the ball. grrrrrrr

Quote:

Originally Posted by corvettejim1968

i have seen two of these now in the last month

Yup, Felix is pretty popular.

Quote:

Originally Posted by KevsClassics

Rene was at the Sacramento swap this morning. Can't beleive his sharp eye missed them.

I'm getting old.

Quote:

Originally Posted by seanrolandwood

Just in case there was some confusion I posted to help rene get them for the truck I did not buy... guy had more than one set those were the better of the two

Thanks buddy, I called him yesterday.

Quote:

Originally Posted by scuderia

guessing he'll want the worse of the two...

Anything that matches the truck.

OC 72 · 08-10-2014, 06:28 PM

Pretty damn cool!!!

Jimbo0076 · 08-10-2014, 10:35 PM

So how much did you end up dropping it? Drop spindles up front?

C/10 King · 08-10-2014, 11:38 PM

Quote:

Originally Posted by OC 72

Pretty damn cool!!!

Thanks buddy!

Quote:

Originally Posted by Jimbo0076

So how much did you end up dropping it? Drop spindles up front?

6 inches in the rear and the coils in the front were cut (no dropped spindles) enough to give it a just a slight rake.

**60-66** · 08-12-2014, 10:59 AM

Quote:

Originally Posted by KevsClassics

Went down one more inch in rear as per Rene's request with CPP 1" blocks also installed CPP bolt in C-notch.

Kev and Rene, truck looks great ! Question Kev on lowering this way. Did you have any pinion angle issues ? I recently did the same drop on my 63 and the pinion angle is aiming up too much. Wondering if there's an easy cure out there or am I going to have to make my own wedge like lowering blocks ? I'm getting a slight vibration with it currently.

b.sharp · 08-14-2014, 10:01 AM

60-66, They make wedge shims to put under the lowering blocks. I believe they can be bought from several suppliers. They also have them in several different degrees. You just need to get a set and slide them under your blocks.

08-06-2014, 08:45 PM	#52
ready2go69 Registered User Join Date: Jan 2010 Location: NC Posts: 129	Re: Who's heard of Felix Chevrolet??? Would be nice if your stripe/sign guy could give a online lesson on this great work. He has our attention. Great job

08-07-2014, 04:30 AM	#53
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: Who's heard of Felix Chevrolet??? Some I like lowered but this one I think looked better stock height. __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble!

08-07-2014, 03:21 PM	#54
hemi jim Registered User Join Date: Jul 2011 Location: a****er, ca. Posts: 54	Re: Who's heard of Felix Chevrolet??? The stance for this particular truck is cool.............

08-07-2014, 04:45 PM	#55
Sick5 C10 CLUB Y QUE! Join Date: Mar 2010 Location: Here Posts: 2,770	Re: Who's heard of Felix Chevrolet??? not bad for a static drop __________________ C/10 CLUB http://67-72chevytrucks.com/vboard/f...play.php?f=148

08-07-2014, 04:58 PM	#56
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,243	Re: Who's heard of Felix Chevrolet??? Looks great. ... __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

08-07-2014, 06:51 PM	#57
KevsClassics TILT COLUMN GURU Join Date: Dec 2006 Location: FRESNO CA Posts: 4,276	Re: Who's heard of Felix Chevrolet??? Went down one more inch in rear as per Rene's request with CPP 1" blocks also installed CPP bolt in C-notch. Attached Images __________________ Instagram kevs_classics64 64 Impala SS Conv 72 Blazer 2wd 75 Jimmy 2wd 63 Belair wagon 02 Silverado ext cab. DD RIP EL JAY

08-07-2014, 07:28 PM	#58
NEWFISHER Registered User Join Date: Sep 2012 Location: Oregon Posts: 3,303	Re: Who's heard of Felix Chevrolet??? It's missing a 63 grille hahaha __________________ GOD BLESS AMERICA!

08-08-2014, 12:52 AM	#61
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: Who's heard of Felix Chevrolet??? Looks perfect! __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

08-08-2014, 09:33 AM	#62
doobiebro Registered User Join Date: Nov 2011 Location: Chaparral NM Posts: 693	Re: Who's heard of Felix Chevrolet??? Looking good Rene! __________________ CURRENT & PAST CHEVY TRUCKS 60 C-10 Apache short step side 62 C-10 short step side 66 GMC Long bed fleet side 305 V-6 77 C-20 Custom Deluxe (Blue Goose)

08-08-2014, 09:52 AM	#63
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: Who's heard of Felix Chevrolet??? That thing is awesome! Jealous again.... __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

08-09-2014, 11:38 AM	#64
seanrolandwood Registered User Join Date: Mar 2014 Location: sacramento, california Posts: 93	Re: Who's heard of Felix Chevrolet??? Sacramento swap meet 155 for the set Attached Images

08-09-2014, 01:27 PM	#65
corvettejim1968 Registered User Join Date: Jun 2011 Location: Phoenix,AZ Posts: 946	Re: Who's heard of Felix Chevrolet??? i have seen two of these now in the last month __________________ Hand Made Factory reproduction A/C vents text or call 602-361-6421 Website for A/C vents https://coolc10.com/

08-09-2014, 05:05 PM	#67
seanrolandwood Registered User Join Date: Mar 2014 Location: sacramento, california Posts: 93	Re: Who's heard of Felix Chevrolet??? Just in case there was some confusion I posted to help rene get them for the truck I did not buy... guy had more than one set those were the better of the two

08-10-2014, 06:28 PM	#71
OC 72 Registered User Join Date: Dec 2011 Location: CA Posts: 361	Re: Who's heard of Felix Chevrolet??? Pretty damn cool!!!

08-10-2014, 10:35 PM	#72
Jimbo0076 Registered User Join Date: Jun 2008 Location: Northeast Alabama Posts: 62	Re: Who's heard of Felix Chevrolet??? So how much did you end up dropping it? Drop spindles up front?



Register or Log In To remove these advertisements.

08-14-2014, 10:01 AM	#75
b.sharp Registered User Join Date: May 2006 Location: Frankfort, Kentucky Posts: 508	Re: Who's heard of Felix Chevrolet??? 60-66, They make wedge shims to put under the lowering blocks. I believe they can be bought from several suppliers. They also have them in several different degrees. You just need to get a set and slide them under your blocks.

Register or Log In To remove these advertisements.