NJ 700r4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**MidLifer** · 09-08-2014, 11:26 AM

SOLD SOLD SOLD

I bought a rebuilt 700R4 for my truck a few months back, but have changed my mind for the umpteenth time and bought a NV4500 instead. Note that I trusted the guy selling me the trans to be honest and I have not cracked the case to verify what's in it, but it has both the sticker and stamping from a well-known South Jersey rebuilder (Ziggy's) and after spending a lot of time with the guy either I'm very naive or he's honest and it's a good trans.

The story was he had a car in and the owner didn't pay for the work he did so he took the car on a mechanic's lien and parted it out.

Includes a flexplate, starter and driveshaft (from a Camaro) for this but no TC.

Happy to try to box and ship this but would greatly prefer a local buyer.

Specs as follows - asking $500/obo - that's what I paid for it:

Raybestos Stage 1 Frictions
•Complete steel module with .097" thick 3-4 kolene steels
•New Input Sprag
•New ACDelco Upgraded Complete Pump Assembly
•New Hardened Pump Rings
•New 13 Vane Pump Rotor
•High Performance Factory .500 Boost Valve
•Bushing Kit
•New Thrust Washers
•Heavy Duty Hardened "Beast" Sun Shell
•Reinforcement sleeve to strengthen input drum
•New ACDelco 5 pinion planetaries both front input and rear reaction
•New Low/ Rev Heavy Duty Spring and Roller
•Corvette Servo
•Wide Carbon-Fiber 2-4 Band with heavy duty anchors
•New ACDelco reverse input drum
•New updated performance valve body separator plate w/ Torlon check balls
•Remanufactured ACDelco "Corvette" calibrated valve body , auto/manual valve body modification, TCI TV cable, etc. All built into a seasoned, high performance case

Also have low hump, crossmember and non-tilt auto column (black) which I will be posting with pics and prices soon.

beetle1960 · 09-08-2014, 01:27 PM

Interested... What town in jersey are you located?

**MidLifer** · 09-08-2014, 01:30 PM

Moorestown, near Cherry Hill and Philly.

**6t727t2** · 09-08-2014, 05:09 PM

Ziggy has been rebuilding transmissions for a long time, mostly hi-performance, and I've only heard good things about his work.

**bcnya2** · 09-08-2014, 05:41 PM

Converter come with it?

Thanks.

Kennuck · 09-08-2014, 05:52 PM

Includes a flexplate, starter and driveshaft (from a Camaro) for this but no TC.

**bcnya2** · 09-08-2014, 07:58 PM

Im sorry.....I totally missed you wrote no torque converter.

Thanks,
Greg

dbb1025 · 09-08-2014, 10:11 PM

Interested in this. Is it possible for a freight quote to 06405? Is this a 2 wheel drive?

**MidLifer** · 09-09-2014, 06:54 AM

Ah yes, thanks guys, this is a 2wd trans.

The best way to get freight is to go to uship.com. I could ship this from my office where we have a dock. Zip ther is 08648.

A 700r4 weighs 125lb dry and the starter and plate would add probably 20lb, then say 10 for the pallet. I could take the yoke off the driveshaft and put that, the starter and the flexplate into a box on the pallet. If you want the shaft I will box that up as a separate piece.

Uship will ask for dimensions. Figure the pallet is 36x48 and it would be about 24 high.

As a comparison, I bought my nv4500 from Champlain NY, on the Canadian border. That weighs 200lb. The low bid on uship was $116. Took about 2 days to get that bid. My inbox was like as episode of Shipping Wars LOL

dbb1025 · 09-09-2014, 11:28 AM

Thank you. Working on freight quote now. Do you have any pictures you can post?

**MidLifer** · 09-09-2014, 11:41 AM

The trans is currently in my storage unit. I'd have to get over there, which may take a day or two. Let me see if I can get there tonight or tomorrow and snap pics. Anything in particular you want to see? It kind of looks like a 700R4 from most angles.....

dbb1025 · 09-09-2014, 12:02 PM

Okay. Sorry to be a pain. Just curious of the condition visually. Being that I will not inspect at this point a visual is better than nothing.

angelo_32806 · 09-09-2014, 01:24 PM

I'm interested if dbb1025 dosen't take it

**MidLifer** · 09-09-2014, 01:34 PM

Ok Angelo. Stay tuned.

dbb1025 · 09-09-2014, 02:20 PM

having issues with ship.com only showing in french?!!!

**MidLifer** · 09-09-2014, 02:35 PM

It's uship.com (not ship.com) and it shows in English for me.

Another site you can try is http://www.freightcenter.com/.

Failing that you can pick up the phone and start calling trucking lines.

dbb1025 · 09-09-2014, 02:39 PM

the board would not allow the u. for some reason it goes to french for me

dbb1025 · 09-09-2014, 03:01 PM

Got uship to work

**MidLifer** · 09-10-2014, 10:07 AM

Pics are here:

https://picasaweb.google.com/1008010...eat=directlink

BTW I got PM from dbb1025 that he has yet to get a freight quote that works for him, so this item is still available to anyone who wants it.

Origin zip would be 08648. It is a commercial address with a loading dock.

beetle1960 · 09-10-2014, 04:29 PM

Midlifer....if you dont mind me asking, where did the spec list come from?

**MidLifer** · 09-10-2014, 04:31 PM

Ask away. It came from the man who sold me the transmission, who stated that he spoke to Ziggy (the builder) and got it from him. In fact it was copied and pasted from him ad on CL.

beetle1960 · 09-10-2014, 08:01 PM

Would you take 350.00 picked up? I know it is somewhat lowball, however, there is a risk involved.

**MidLifer** · 09-11-2014, 07:11 AM

Sorry Beetle that's not enough to make me say yes.

THoeler · 09-11-2014, 09:36 AM

would the driveline fit a 71 short stepper with a small block and 700r4? would you sell the driveline separate? I'm in NJ and can pickup today.

**MidLifer** · 09-11-2014, 09:40 AM

sorry i have no idea if the driveshaft will work for your application. I can measure it tonight and post the length.

BTW if you know the length you can pick up driveshafts at any junkyard cheaply. Would save you the 1.5 hour drive from where you live to where I live (Cherry Hill area).

09-08-2014, 11:26 AM	#1
MidLifer Senior Member Join Date: Apr 2011 Location: South NJ Posts: 1,268	700r4 SOLD SOLD SOLD I bought a rebuilt 700R4 for my truck a few months back, but have changed my mind for the umpteenth time and bought a NV4500 instead. Note that I trusted the guy selling me the trans to be honest and I have not cracked the case to verify what's in it, but it has both the sticker and stamping from a well-known South Jersey rebuilder (Ziggy's) and after spending a lot of time with the guy either I'm very naive or he's honest and it's a good trans. The story was he had a car in and the owner didn't pay for the work he did so he took the car on a mechanic's lien and parted it out. Includes a flexplate, starter and driveshaft (from a Camaro) for this but no TC. Happy to try to box and ship this but would greatly prefer a local buyer. Specs as follows - asking $500/obo - that's what I paid for it: Raybestos Stage 1 Frictions •Complete steel module with .097" thick 3-4 kolene steels •New Input Sprag •New ACDelco Upgraded Complete Pump Assembly •New Hardened Pump Rings •New 13 Vane Pump Rotor •High Performance Factory .500 Boost Valve •Bushing Kit •New Thrust Washers •Heavy Duty Hardened "Beast" Sun Shell •Reinforcement sleeve to strengthen input drum •New ACDelco 5 pinion planetaries both front input and rear reaction •New Low/ Rev Heavy Duty Spring and Roller •Corvette Servo •Wide Carbon-Fiber 2-4 Band with heavy duty anchors •New ACDelco reverse input drum •New updated performance valve body separator plate w/ Torlon check balls •Remanufactured ACDelco "Corvette" calibrated valve body , auto/manual valve body modification, TCI TV cable, etc. All built into a seasoned, high performance case Also have low hump, crossmember and non-tilt auto column (black) which I will be posting with pics and prices soon. Last edited by MidLifer; 09-13-2014 at 01:37 PM. Reason: add additional parts

09-08-2014, 01:27 PM	#2
beetle1960 Registered User Join Date: Aug 2013 Location: Hiram Ohio Posts: 619	Re: 700r4 Interested... What town in jersey are you located? __________________ 1953 Chevy 3100 1964 Chevy Impala 1966 Chevy El Camino 1970 Chevy C10 Fleet Long 1972 Chevy C10 Step long 1985 Chevy K10 Fleet Short

09-08-2014, 01:30 PM	#3
MidLifer Senior Member Join Date: Apr 2011 Location: South NJ Posts: 1,268	Re: 700r4 Moorestown, near Cherry Hill and Philly.

09-08-2014, 05:09 PM	#4
6t727t2 Active Member Join Date: Dec 2004 Location: NJ Posts: 6,456	Re: 700r4 Ziggy has been rebuilding transmissions for a long time, mostly hi-performance, and I've only heard good things about his work.

09-08-2014, 05:41 PM	#5
bcnya2 Senior Member Join Date: Oct 2012 Location: New Windsor, Md (Baltimore) Posts: 945	Re: 700r4 Converter come with it? Thanks. __________________ 72 Cheyenne Super 350 Holley EFI/700R4 67 Camaro SS/RS 68 Corvette 427 Tri-power 4-speed convertible 55 Chevy Belair Hardtop

09-08-2014, 05:52 PM	#6
Kennuck Registered User Join Date: Oct 2013 Location: Dresden, Ontario Posts: 647	Re: 700r4 Includes a flexplate, starter and driveshaft (from a Camaro) for this but no TC. __________________ 1970 Short Wide 5.3 4L60E BlackBear tune 3:73 gears, Boyd's Tank 2.5 / 4 drop 5 lug disc brakes Vintage Air 18x8 Ridlers 255/55 frt. 18x9.5 275/60 rear

09-08-2014, 07:58 PM	#7
bcnya2 Senior Member Join Date: Oct 2012 Location: New Windsor, Md (Baltimore) Posts: 945	Re: 700r4 Im sorry.....I totally missed you wrote no torque converter. Thanks, Greg __________________ 72 Cheyenne Super 350 Holley EFI/700R4 67 Camaro SS/RS 68 Corvette 427 Tri-power 4-speed convertible 55 Chevy Belair Hardtop

09-08-2014, 10:11 PM	#8
dbb1025 Registered User Join Date: Jul 2013 Location: branford, connecticut Posts: 201	Re: 700r4 Interested in this. Is it possible for a freight quote to 06405? Is this a 2 wheel drive?

09-09-2014, 06:54 AM	#9
MidLifer Senior Member Join Date: Apr 2011 Location: South NJ Posts: 1,268	Re: 700r4 Ah yes, thanks guys, this is a 2wd trans. The best way to get freight is to go to uship.com. I could ship this from my office where we have a dock. Zip ther is 08648. A 700r4 weighs 125lb dry and the starter and plate would add probably 20lb, then say 10 for the pallet. I could take the yoke off the driveshaft and put that, the starter and the flexplate into a box on the pallet. If you want the shaft I will box that up as a separate piece. Uship will ask for dimensions. Figure the pallet is 36x48 and it would be about 24 high. As a comparison, I bought my nv4500 from Champlain NY, on the Canadian border. That weighs 200lb. The low bid on uship was $116. Took about 2 days to get that bid. My inbox was like as episode of Shipping Wars LOL Last edited by MidLifer; 09-09-2014 at 07:08 AM.

09-09-2014, 11:28 AM	#10
dbb1025 Registered User Join Date: Jul 2013 Location: branford, connecticut Posts: 201	Re: 700r4 Thank you. Working on freight quote now. Do you have any pictures you can post?

09-09-2014, 11:41 AM	#11
MidLifer Senior Member Join Date: Apr 2011 Location: South NJ Posts: 1,268	Re: 700r4 The trans is currently in my storage unit. I'd have to get over there, which may take a day or two. Let me see if I can get there tonight or tomorrow and snap pics. Anything in particular you want to see? It kind of looks like a 700R4 from most angles.....

09-09-2014, 12:02 PM	#12
dbb1025 Registered User Join Date: Jul 2013 Location: branford, connecticut Posts: 201	Re: 700r4 Okay. Sorry to be a pain. Just curious of the condition visually. Being that I will not inspect at this point a visual is better than nothing.

09-09-2014, 01:24 PM	#13
angelo_32806 Registered User Join Date: May 2009 Location: Orlando FL Posts: 107	Re: 700r4 I'm interested if dbb1025 dosen't take it

09-09-2014, 01:34 PM	#14
MidLifer Senior Member Join Date: Apr 2011 Location: South NJ Posts: 1,268	Re: 700r4 Ok Angelo. Stay tuned.

09-09-2014, 02:20 PM	#15
dbb1025 Registered User Join Date: Jul 2013 Location: branford, connecticut Posts: 201	Re: 700r4 having issues with ship.com only showing in french?!!!



Register or Log In To remove these advertisements.

09-09-2014, 02:35 PM	#16
MidLifer Senior Member Join Date: Apr 2011 Location: South NJ Posts: 1,268	Re: 700r4 It's uship.com (not ship.com) and it shows in English for me. Another site you can try is http://www.freightcenter.com/. Failing that you can pick up the phone and start calling trucking lines.

09-09-2014, 02:39 PM	#17
dbb1025 Registered User Join Date: Jul 2013 Location: branford, connecticut Posts: 201	Re: 700r4 the board would not allow the u. for some reason it goes to french for me

09-09-2014, 03:01 PM	#18
dbb1025 Registered User Join Date: Jul 2013 Location: branford, connecticut Posts: 201	Re: 700r4 Got uship to work

09-10-2014, 10:07 AM	#19
MidLifer Senior Member Join Date: Apr 2011 Location: South NJ Posts: 1,268	Re: 700r4 Pics are here: https://picasaweb.google.com/1008010...eat=directlink BTW I got PM from dbb1025 that he has yet to get a freight quote that works for him, so this item is still available to anyone who wants it. Origin zip would be 08648. It is a commercial address with a loading dock.

09-10-2014, 04:29 PM	#20
beetle1960 Registered User Join Date: Aug 2013 Location: Hiram Ohio Posts: 619	Re: 700r4 Midlifer....if you dont mind me asking, where did the spec list come from? __________________ 1953 Chevy 3100 1964 Chevy Impala 1966 Chevy El Camino 1970 Chevy C10 Fleet Long 1972 Chevy C10 Step long 1985 Chevy K10 Fleet Short

09-10-2014, 04:31 PM	#21
MidLifer Senior Member Join Date: Apr 2011 Location: South NJ Posts: 1,268	Re: 700r4 Ask away. It came from the man who sold me the transmission, who stated that he spoke to Ziggy (the builder) and got it from him. In fact it was copied and pasted from him ad on CL.

09-10-2014, 08:01 PM	#22
beetle1960 Registered User Join Date: Aug 2013 Location: Hiram Ohio Posts: 619	Re: 700r4 Would you take 350.00 picked up? I know it is somewhat lowball, however, there is a risk involved. __________________ 1953 Chevy 3100 1964 Chevy Impala 1966 Chevy El Camino 1970 Chevy C10 Fleet Long 1972 Chevy C10 Step long 1985 Chevy K10 Fleet Short

09-11-2014, 07:11 AM	#23
MidLifer Senior Member Join Date: Apr 2011 Location: South NJ Posts: 1,268	Re: 700r4 Sorry Beetle that's not enough to make me say yes.

09-11-2014, 09:36 AM	#24
THoeler Registered User Join Date: Apr 2013 Location: Barnegat, NJ Posts: 34	Re: 700r4 would the driveline fit a 71 short stepper with a small block and 700r4? would you sell the driveline separate? I'm in NJ and can pickup today.

09-11-2014, 09:40 AM	#25
MidLifer Senior Member Join Date: Apr 2011 Location: South NJ Posts: 1,268	Re: 700r4 sorry i have no idea if the driveshaft will work for your application. I can measure it tonight and post the length. BTW if you know the length you can pick up driveshafts at any junkyard cheaply. Would save you the 1.5 hour drive from where you live to where I live (Cherry Hill area).

Register or Log In To remove these advertisements.