MN Rapid Parting Big Block GMC Custom!!!! - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jessemthompson · 09-08-2014, 11:55 PM

Paypal for sway bar sent

toyplumbertrucks · 09-09-2014, 07:02 AM

How much for the front coil springs?

Vintage Windmills · 09-09-2014, 09:41 AM

Quote:

Originally Posted by jessemthompson

Paypal for sway bar sent

got it thanks!

Quote:

Originally Posted by toyplumbertrucks

How much for the front coil springs?

Jesse I;m thinking an additional $47 for those to ship with your pulleys, they're heavy and take some time to remove.

waylonbud · 09-09-2014, 09:50 AM

Whats the condition of the AC controls; any real bad pitting or broken arms or levers? If not can I get a price with shipping to 37303.
Thanks.

toyplumbertrucks · 09-09-2014, 10:23 AM

Quote:

Originally Posted by Vintage Windmills

got it thanks!

Jesse I;m thinking an additional $47 for those to ship with your pulleys, they're heavy and take some time to remove.

I will take them. I will pay you when I get home.

nickv6266 · 09-09-2014, 10:42 AM

Quote:

Originally Posted by Vintage Windmills

Nick you are up on the brackets.

General update: Truck cab and front end is getting loaded on the scrap trailer tomorrow night so the rest of you please get back to me also soon since its getting hauled away as early as Friday.

I hate to be one of todays tire kickers but ill let this go to next guy. I was hoping for 72 style alt bracket. If for some reason it wont sell for you shoot me a pm and ill buy it for opening my mouth. LOL

Vintage Windmills · 09-09-2014, 11:22 AM

Quote:

Originally Posted by nickv6266

I hate to be one of todays tire kickers but ill let this go to next guy. I was hoping for 72 style alt bracket. If for some reason it wont sell for you shoot me a pm and ill buy it for opening my mouth. LOL

Nick, no problem, 3 others interested. More worried about the engine and trans selling, i hate to scrap them and im surprised there isnt interest in an original 396 and th400! oil and inside valve covers looks good on the bbc, need to try to turn it over.

Quote:

Originally Posted by toyplumbertrucks

I will take them. I will pay you when I get home.

sounds good sir.

toyplumbertrucks · 09-09-2014, 11:56 AM

I would be a buyer on the transmission but shipping would probably be a fortune.

Gawdly · 09-09-2014, 12:41 PM

You have pm on power steering pump, res, brakets, alt brackets, fan, fan clutch and fan shroud... If still available, or put me in line.

Gawdly · 09-09-2014, 01:02 PM

... And add radiator brackets (upper and lower) to that list.

BLT gmc · 09-09-2014, 01:20 PM

Please PM me your address so I can mail the $25 for the air cleaner base. To save you some $, you can cut the base. I only need intake snout with about 2-3 inches of the air cleaner attached around the base of the snout. Thank you, Bruce

**lolife99** · 09-09-2014, 05:25 PM

Quote:

Originally Posted by Vintage Windmills

Keith, there is one dime sized area with rust and a crack. I will do $59 shipped

Paypal money sent today.
Thank you.

Vintage Windmills · 09-09-2014, 07:43 PM

Quote:

Originally Posted by waylonbud

Whats the condition of the AC controls; any real bad pitting or broken arms or levers? If not can I get a price with shipping to 37303.
Thanks.

Will look tonight. Did you get the 67 cab home yet?

Quote:

Originally Posted by toyplumbertrucks

I will take them. I will pay you when I get home.

got payment thanks!

Quote:

Originally Posted by Gawdly

... And add radiator brackets (upper and lower) to that list.

Will see if other gentleman takes the BBC stuff then I'll let you know. The set of 4, 4core radiator brackets are $37 shipped on their own.

Quote:

Originally Posted by BLT gmc

Please PM me your address so I can mail the $25 for the air cleaner base. To save you some $, you can cut the base. I only need intake snout with about 2-3 inches of the air cleaner attached around the base of the snout. Thank you, Bruce

Do you still want the eyebrows?

Quote:

Originally Posted by lolife99

Paypal money sent today.
Thank you.

Got it thanks!

Vintage Windmills · 09-09-2014, 07:45 PM

Guys when you pay, it makes things a little easier for me if you put name/address in the paypal note and just post you sent a payment here. PM's are just another thing to manage... That said, not a big deal, but it could save us both a little time.

BLT gmc · 09-09-2014, 09:15 PM

Yes, I would like the eyebrows if tinkermc passes. Bruce

waylonbud · 09-09-2014, 09:19 PM

No its tucked away in one of my dads sheds waiting on me to come and get it. If I wasnt deep into my wifes suburban build, Id send my dad over there to pick up that big block. I hope it dont get scrapped. Maybe let me know if it dont sell and I'll see what I can come up with.
Thanks.

Gawdly · 09-09-2014, 09:37 PM

I'll take the 4 core brackets... would like to ship with all the other stuff if the other guy doesn't take them. Putting a 402 in my 71 k10 and my motor is missing everything.

Vintage Windmills · 09-09-2014, 10:26 PM

Quote:

Originally Posted by BLT gmc

Yes, I would like the eyebrows if tinkermc passes. Bruce

He's had a couple days and I haven't heard from him so they are yours if 60 total shipped for those and the cleaner part sounds good. Sending PM with address

Quote:

Originally Posted by waylonbud

No its tucked away in one of my dads sheds waiting on me to come and get it. If I wasnt deep into my wifes suburban build, Id send my dad over there to pick up that big block. I hope it dont get scrapped. Maybe let me know if it dont sell and I'll see what I can come up with.
Thanks.

Waylon, sounds good.

Quote:

Originally Posted by Gawdly

I'll take the 4 core brackets... would like to ship with all the other stuff if the other guy doesn't take them. Putting a 402 in my 71 k10 and my motor is missing everything.

He's got until tomorrow to get back to me on the big block stuff, so should know by then.

**too much stuff** · 09-09-2014, 11:15 PM

So, what is the story on the engine? Any history on it?

Vintage Windmills · 09-10-2014, 12:06 AM

Eric, looks like it was in service when the distributor caught fire. Carb isn't burned and oil looks good and inside valve covers is good. Will see if she turns over tomorrow. Looks original judging by the thick layer of grease on it. 396 is on SPID. Price is cheap, worth a shot I would think.

Black71Shorty · 09-10-2014, 09:20 AM

Would you sell the valve covers? I need a good straight set.
Thanks

BLT gmc · 09-10-2014, 10:18 AM

I will take the eyebrows (if the have good hardware) and the air cleaner snout with about 2 inches of air cleaner around the snout base for $60 shipped. Tried to send PM, but it said your box is full. Bruce

Vintage Windmills · 09-10-2014, 11:01 AM

Cleaned out some PM"s sounds good

Vintage Windmills · 09-10-2014, 11:11 PM

Quote:

Originally Posted by waylonbud

No its tucked away in one of my dads sheds waiting on me to come and get it. If I wasnt deep into my wifes suburban build, Id send my dad over there to pick up that big block. I hope it dont get scrapped. Maybe let me know if it dont sell and I'll see what I can come up with.
Thanks.

Waylon, the AC control has a broken lever sorry.

I got the BBC to turn over by grasping the front pulley firmly and turning.

Quote:

Originally Posted by Black71Shorty

Would you sell the valve covers? I need a good straight set.
Thanks

Thinking I will keep with the engine for now

Gawdly · 09-10-2014, 11:29 PM

Quote:

Originally Posted by Vintage Windmills

He's got until tomorrow to get back to me on the big block stuff, so should know by then.

Any word?

09-08-2014, 11:55 PM	#51
jessemthompson Registered User Join Date: Nov 2011 Location: Williamsburg, VA Posts: 960	Re: Rapid Parting Big Block GMC Custom!!!! Paypal for sway bar sent

09-09-2014, 07:02 AM	#52
toyplumbertrucks Registered User Join Date: Aug 2012 Location: st. john, in Posts: 280	Re: Rapid Parting Big Block GMC Custom!!!! How much for the front coil springs?

09-09-2014, 09:50 AM	#54
waylonbud Registered User Join Date: Dec 2011 Location: Athens,TN Posts: 302	Re: Rapid Parting Big Block GMC Custom!!!! Whats the condition of the AC controls; any real bad pitting or broken arms or levers? If not can I get a price with shipping to 37303. Thanks.

09-09-2014, 11:56 AM	#58
toyplumbertrucks Registered User Join Date: Aug 2012 Location: st. john, in Posts: 280	Re: Rapid Parting Big Block GMC Custom!!!! I would be a buyer on the transmission but shipping would probably be a fortune.

09-09-2014, 12:41 PM	#59
Gawdly Registered User Join Date: Jun 2010 Location: Boise, ID Posts: 115	Re: Rapid Parting Big Block GMC Custom!!!! You have pm on power steering pump, res, brakets, alt brackets, fan, fan clutch and fan shroud... If still available, or put me in line.

09-09-2014, 01:02 PM	#60
Gawdly Registered User Join Date: Jun 2010 Location: Boise, ID Posts: 115	Re: Rapid Parting Big Block GMC Custom!!!! ... And add radiator brackets (upper and lower) to that list.

09-09-2014, 01:20 PM	#61
BLT gmc Registered User Join Date: Feb 2014 Location: West Iowa Posts: 1,106	Re: Rapid Parting Big Block GMC Custom!!!! Please PM me your address so I can mail the $25 for the air cleaner base. To save you some $, you can cut the base. I only need intake snout with about 2-3 inches of the air cleaner attached around the base of the snout. Thank you, Bruce

09-09-2014, 07:45 PM	#64
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Rapid Parting Big Block GMC Custom!!!! Guys when you pay, it makes things a little easier for me if you put name/address in the paypal note and just post you sent a payment here. PM's are just another thing to manage... That said, not a big deal, but it could save us both a little time. __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

09-09-2014, 09:15 PM	#65
BLT gmc Registered User Join Date: Feb 2014 Location: West Iowa Posts: 1,106	Re: Rapid Parting Big Block GMC Custom!!!! Yes, I would like the eyebrows if tinkermc passes. Bruce

09-09-2014, 09:19 PM	#66
waylonbud Registered User Join Date: Dec 2011 Location: Athens,TN Posts: 302	Re: Rapid Parting Big Block GMC Custom!!!! No its tucked away in one of my dads sheds waiting on me to come and get it. If I wasnt deep into my wifes suburban build, Id send my dad over there to pick up that big block. I hope it dont get scrapped. Maybe let me know if it dont sell and I'll see what I can come up with. Thanks.

09-09-2014, 09:37 PM	#67
Gawdly Registered User Join Date: Jun 2010 Location: Boise, ID Posts: 115	Re: Rapid Parting Big Block GMC Custom!!!! I'll take the 4 core brackets... would like to ship with all the other stuff if the other guy doesn't take them. Putting a 402 in my 71 k10 and my motor is missing everything.

09-09-2014, 11:15 PM	#69
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,765	Re: Rapid Parting Big Block GMC Custom!!!! So, what is the story on the engine? Any history on it? __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

09-10-2014, 12:06 AM	#70
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Rapid Parting Big Block GMC Custom!!!! Eric, looks like it was in service when the distributor caught fire. Carb isn't burned and oil looks good and inside valve covers is good. Will see if she turns over tomorrow. Looks original judging by the thick layer of grease on it. 396 is on SPID. Price is cheap, worth a shot I would think. __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

09-10-2014, 09:20 AM	#71
Black71Shorty Registered User Join Date: May 2009 Location: Ft. Worth, Texas...”Where the West begins” Posts: 424	Re: Rapid Parting Big Block GMC Custom!!!! Would you sell the valve covers? I need a good straight set. Thanks

09-10-2014, 10:18 AM	#72
BLT gmc Registered User Join Date: Feb 2014 Location: West Iowa Posts: 1,106	Re: Rapid Parting Big Block GMC Custom!!!! I will take the eyebrows (if the have good hardware) and the air cleaner snout with about 2 inches of air cleaner around the snout base for $60 shipped. Tried to send PM, but it said your box is full. Bruce Last edited by BLT gmc; 09-10-2014 at 10:19 AM. Reason: clarifying



Register or Log In To remove these advertisements.

09-10-2014, 11:01 AM	#73
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Rapid Parting Big Block GMC Custom!!!! Cleaned out some PM"s sounds good __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

Register or Log In To remove these advertisements.