MN Rapid Parting Big Block GMC Custom!!!! - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Vintage Windmills · 09-15-2014, 09:59 AM

Quote:

Originally Posted by uncle

Thx for checking. I'll pass for now. Like to get complete unit.

No worries. Pics of switch and bracket in above post for anyone interested

Vintage Windmills · 09-15-2014, 12:12 PM

Another BBC trans linkage. Toyplumbertrucks has 1st shot

Jake1971 · 09-15-2014, 07:35 PM

[QUOTE=Vintage Windmills;6843525]Paul, I don't have any extras of those rear harnesses since I make trailers out of the back halves. I do have a spare item #4 though. No extra bottom seat foam right now.

Pics of armrests and sliders below. The one with seal around perimeter yet is pretty rough as far as slide weatherstripping goes and I'd do $30 for it plus ship. Shipping will probably make it not a good deal given its condition. Other one is nice except for cosmetic rubs on the back from a topper being too close. I'd do $75 on this one plus shipping. Also the latch is broke/missing on both. I'm guessing shipping would be around $50 for either.

Armrests by themselves would be $35 shipped.

Hey Jud, bummer that the latches are broken. I found a light blue pair of driver quality armrests in another thread so I will pass on them and the slider. I have two of item #4 wire harnesses that I bought from Randy (teeitup). Thanks anyways and good luck with your sales.

Littletony · 09-16-2014, 07:45 AM

Jud does it have the custom door emblems? If so what is the condition of them?

toyplumbertrucks · 09-16-2014, 07:48 AM

Quote:

Originally Posted by Vintage Windmills

Another BBC trans linkage. Toyplumbertrucks has 1st shot

I will take it.

toyplumbertrucks · 09-16-2014, 10:32 PM

Quote:

Originally Posted by toyplumbertrucks

I will take it.

payment sent.

Vintage Windmills · 09-16-2014, 11:37 PM

Quote:

Originally Posted by Littletony

Jud does it have the custom door emblems? If so what is the condition of them?

Hi Tony, one door has emblems, none on the other. the custom part has some pitting, but the camper doesn't. See pic below

Quote:

Originally Posted by toyplumbertrucks

payment sent.

Got it, thanks, planning to ship with rest of items that haven't shipped yet tomorrow.

Pic for Tony

Littletony · 09-17-2014, 07:20 AM

Jud let me make sure it's the same as the one on my truck.

Vintage Windmills · 09-17-2014, 08:33 AM

No problem Tony, I think I may have another one or two here, but will have to look for them.

BLT gmc · 09-17-2014, 09:29 PM

Eyebrows and air cleaner snout arrived undamaged. I have never seen a cleaner with that much rust!!!! It was as you described. I believe I can use the snout. Thank you, Bruce

Vintage Windmills · 09-18-2014, 09:01 AM

Quote:

Originally Posted by BLT gmc

Eyebrows and air cleaner snout arrived undamaged. I have never seen a cleaner with that much rust!!!! It was as you described. I believe I can use the snout. Thank you, Bruce

Bruce, good to hear you can use the snout, I was just going to scrap the whole thing. You should have seen the rest of it

Amazing how corrosive those mouse nests are!

**gmc 2500 4x4** · 11-15-2014, 03:43 PM

do you still have this dana 60?

Vintage Windmills · 11-15-2014, 03:58 PM

Yes, I still have a couple 3.54 open Dana 60's.

**gmc 2500 4x4** · 11-15-2014, 04:05 PM

i have a post looking for brake hardware, with 12" drums. are you willing to part out one? i could use that 3:54 carrier w/axles if you would ship.

Burnsman · 11-16-2014, 04:26 PM

I could use a hubcap. 2 if possible??? Let me know. Trying to get my father in laws truck done for Christmas! Brian

engairuph · 11-16-2014, 08:18 PM

I'll take the column for 60 shipped to 39503 business. pm information and how much for dash a/c harness?

Vintage Windmills · 11-18-2014, 09:04 PM

Quote:

Originally Posted by gmc 2500 4x4

i have a post looking for brake hardware, with 12" drums. are you willing to part out one? i could use that 3:54 carrier w/axles if you would ship.

I think I'll keep together. Too bad you aren't closer I'd give you a good deal on the whole thing. Just don't have a good way to ship sorry.

Quote:

Originally Posted by Burnsman

I could use a hubcap. 2 if possible??? Let me know. Trying to get my father in laws truck done for Christmas! Brian

Sorry they are not available anymore. This thread is a little old

Quote:

Originally Posted by engairuph

I'll take the column for 60 shipped to 39503 business. pm information and how much for dash a/c harness?

Sorry they are not available anymore. This thread is a little old

**gmc 2500 4x4** · 11-19-2014, 12:39 AM

no problem, i think i found some parts...thanx 4 the reply

BigCarl · 03-05-2015, 07:56 PM

This is an older thread, but I didn't see the BBC Perches, Mounts and Clams sell. Do you still have them?

Shipping to 55605

09-15-2014, 12:12 PM	#102
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Rapid Parting Big Block GMC Custom!!!! Another BBC trans linkage. Toyplumbertrucks has 1st shot Attached Images __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

09-15-2014, 07:35 PM	#103
Jake1971 Registered User Join Date: Oct 2013 Location: Bonnerdale, AR Posts: 699	Re: Rapid Parting Big Block GMC Custom!!!! [QUOTE=Vintage Windmills;6843525]Paul, I don't have any extras of those rear harnesses since I make trailers out of the back halves. I do have a spare item #4 though. No extra bottom seat foam right now. Pics of armrests and sliders below. The one with seal around perimeter yet is pretty rough as far as slide weatherstripping goes and I'd do $30 for it plus ship. Shipping will probably make it not a good deal given its condition. Other one is nice except for cosmetic rubs on the back from a topper being too close. I'd do $75 on this one plus shipping. Also the latch is broke/missing on both. I'm guessing shipping would be around $50 for either. Armrests by themselves would be $35 shipped. Hey Jud, bummer that the latches are broken. I found a light blue pair of driver quality armrests in another thread so I will pass on them and the slider. I have two of item #4 wire harnesses that I bought from Randy (teeitup). Thanks anyways and good luck with your sales. __________________ 1971 Bone Stock C10 project "Jake" 1997 Sierra SLT factory short bed "Silver Bullet"

09-16-2014, 07:45 AM	#104
Littletony Registered User Join Date: Sep 2010 Location: Jacksonville, NC Posts: 596	Re: Rapid Parting Big Block GMC Custom!!!! Jud does it have the custom door emblems? If so what is the condition of them? __________________ "Some people spend an entire lifetime wondering if they've made a difference. The Marines don't have that problem." President Ronald Reagan,1985 "The Marines I have seen around the world have the cleanest bodies, the filthiest minds, the highest morale, and the lowest morals of any group of animals I have ever seen. Thank God for the United States Marine Corps!" ..............Eleanor Roosevelt, 1945

09-17-2014, 07:20 AM	#108
Littletony Registered User Join Date: Sep 2010 Location: Jacksonville, NC Posts: 596	Re: Rapid Parting Big Block GMC Custom!!!! Jud let me make sure it's the same as the one on my truck. __________________ "Some people spend an entire lifetime wondering if they've made a difference. The Marines don't have that problem." President Ronald Reagan,1985 "The Marines I have seen around the world have the cleanest bodies, the filthiest minds, the highest morale, and the lowest morals of any group of animals I have ever seen. Thank God for the United States Marine Corps!" ..............Eleanor Roosevelt, 1945

09-17-2014, 08:33 AM	#109
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Rapid Parting Big Block GMC Custom!!!! No problem Tony, I think I may have another one or two here, but will have to look for them. __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

09-17-2014, 09:29 PM	#110
BLT gmc Registered User Join Date: Feb 2014 Location: West Iowa Posts: 1,106	Re: Rapid Parting Big Block GMC Custom!!!! Eyebrows and air cleaner snout arrived undamaged. I have never seen a cleaner with that much rust!!!! It was as you described. I believe I can use the snout. Thank you, Bruce

11-15-2014, 03:43 PM	#112
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,958	Re: Rapid Parting Big Block GMC Custom!!!! do you still have this dana 60?

11-15-2014, 03:58 PM	#113
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Rapid Parting Big Block GMC Custom!!!! Yes, I still have a couple 3.54 open Dana 60's. __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

11-15-2014, 04:05 PM	#114
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,958	Re: Rapid Parting Big Block GMC Custom!!!! i have a post looking for brake hardware, with 12" drums. are you willing to part out one? i could use that 3:54 carrier w/axles if you would ship.

11-16-2014, 04:26 PM	#115
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Re: Rapid Parting Big Block GMC Custom!!!! I could use a hubcap. 2 if possible??? Let me know. Trying to get my father in laws truck done for Christmas! Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

11-16-2014, 08:18 PM	#116
engairuph Registered User Join Date: Oct 2014 Location: D'Iberville, MS Posts: 449	Re: Rapid Parting Big Block GMC Custom!!!! I'll take the column for 60 shipped to 39503 business. pm information and how much for dash a/c harness? __________________ Ralph L. Jasper 69 4x4 Suburban PTO winch(NAVY) 13 GMC Ext cab 12 Ford Fusion SE(wife) MAI Interior shop

11-19-2014, 12:39 AM	#118
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,958	Re: Rapid Parting Big Block GMC Custom!!!! no problem, i think i found some parts...thanx 4 the reply

03-05-2015, 07:56 PM	#119
BigCarl Registered User Join Date: Sep 2007 Location: Thunder Bay, Ontario Posts: 170	Re: Rapid Parting Big Block GMC Custom!!!! This is an older thread, but I didn't see the BBC Perches, Mounts and Clams sell. Do you still have them? Shipping to 55605



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.