Project Roxy - Page 25 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**lolife99** · 10-01-2014, 06:02 PM

Quote:

Originally Posted by Rochlow

Guy running Dropmembers and disks in the front ( I have CPP 13" rotors in the front). What are you using for brake hose kits (size, length, etc). CPP has a 7/6" and a 10mm stainless braided kit, but was wondering if I should get the 12" or 14" length.

I would think it would depend on where the flex line connects to the steel line.

I would air it up and measure.
And the lay it out and measure.
Vacume hose is good to mock up your length, so you can turn the wheels also.
Straight fittings or 90 degree fittings at the caliper also affect the length.

Rochlow · 10-01-2014, 06:23 PM

http://www.classicperform.com/Store/...Cars/BHKS7.htm

These are the lines I was thinking about.

Rochlow · 10-01-2014, 06:26 PM

Quote:

Originally Posted by lolife99

I would think it would depend on where the flex line connects to the steel line.

I would air it up and measure.
And the lay it out and measure.
Vacume hose is good to mock up your length, so you can turn the wheels also.
Staight fittings of 90 degree fittings at the caliper also affect the length.

I will have to do some measuring and see what I come up with. Thanks for the advice.

original-71 · 10-02-2014, 11:41 AM

did the tailgate handle come with the truck ? been trying to locate a stainless one.

Rochlow · 10-02-2014, 12:11 PM

Quote:

Originally Posted by original-71

did the tailgate handle come with the truck ? been trying to locate a stainless one.

It's just a Chrome one from LMC. It's o.k. at best. If I could find and afford an OEM or NOS one in stainless, I'd be all for it.

original-71 · 10-02-2014, 12:20 PM

Quote:

Originally Posted by Rochlow

It's just a Chrome one from LMC. It's o.k. at best. If I could find and afford an OEM or NOS one in stainless, I'd be all for it.

thank you for the info ill check around looks good on your truck brother

Rochlow · 10-02-2014, 12:21 PM

Quote:

Originally Posted by original-71

thank you for the info ill check around looks good on your truck brother

Thank you.

Rochlow · 10-05-2014, 05:28 PM

boonedogs72 · 10-05-2014, 08:59 PM

Nice touch. I dig it

sduckworth13 · 10-05-2014, 09:22 PM

Glove box door looks great Jeff

Rochlow · 10-23-2014, 03:10 PM

Nothing to show, but I'm not a fan of bending brake and fuel lines.

Rochlow · 11-08-2014, 02:45 PM

Quote:

Originally Posted by lolife99

I would think it would depend on where the flex line connects to the steel line.

I would air it up and measure.
And the lay it out and measure.
Vacume hose is good to mock up your length, so you can turn the wheels also.
Straight fittings or 90 degree fittings at the caliper also affect the length.

I used 10mm line with straight fittings that were 12" long. Putting the suspension through the travel, this length seemed about right.

I just have to rebend one line, secure them in a few places and I should be done with the brake lines.

Thanks for the help and ideas, lolife99

**lolife99** · 11-08-2014, 06:22 PM

Glad you got it figured out!
I know I made a few purchases from Speedway Motors before I got all my brake lines done.
They have a very good selection of braided brake line fittings and hose.

Rochlow · 11-20-2014, 08:41 PM

I'm looking at the exhaust and was thinking of use Black Widow mufflers. Has anyone had any experience with them

PBFAB.COM · 11-20-2014, 08:48 PM

Quote:

Originally Posted by Rochlow

I'm looking at the exhaust and was thinking of use Black Widow mufflers. Has anyone had any experience with them

They are a private label brand made by Gibson. I have no personal experience with Black Widow Exhaust, but have heard good things and know that Gibson makes a quality product.

Nate

Rochlow · 11-20-2014, 09:29 PM

I was thinking these or hushpowers

knomadd · 11-21-2014, 10:12 AM

Hushpowers are pretty quiet, compared to a Flowmaster, Magna Flow or Borla type sound. I had a set on my GTO, but I really wanted Flowmasters.... was really disappointed. If you want quieter than a Flowmaster, the Hushpowers still have a pretty cool tone, just not nearly as noticeable.

Unfortunately, no experience with Black Widow, or Gibson for that matter.

Rochlow · 11-21-2014, 10:59 AM

Quote:

Originally Posted by knomadd

Hushpowers are pretty quiet, compared to a Flowmaster, Magna Flow or Borla type sound. I had a set on my GTO, but I really wanted Flowmasters.... was really disappointed. If you want quieter than a Flowmaster, the Hushpowers still have a pretty cool tone, just not nearly as noticeable.

Unfortunately, no experience with Black Widow, or Gibson for that matter.

Thanks for the advice. I don't want quieter, I'm looking for a performance truck sound. I have flowmasters on my daily driver and like the tone.

Last_Paladin · 11-21-2014, 10:06 PM

Quote:

Originally Posted by Rochlow

I'm looking at the exhaust and was thinking of use Black Widow mufflers. Has anyone had any experience with them

Yep. Bought them for my Camaro project.

You'd love 'em. Be sure to buy the 304 stainless, over the 409 stuff.

Rochlow · 12-15-2014, 10:13 AM

Well, Just working on the parking brake and found out you can have a garage door company make a custom length intermediate cable with swage fittings, instead of ordering one.

Rochlow · 12-22-2014, 11:15 PM

Santa came early for Roxy

1stchevy · 12-23-2014, 02:38 PM

Is that a battery box?

Rochlow · 12-23-2014, 05:44 PM

Quote:

Originally Posted by 1stchevy

Is that a battery box?

Yes, it is.

68shortwide · 12-23-2014, 06:12 PM

Awesome build. Subbed.

1stchevy · 12-23-2014, 07:51 PM

Quote:

Originally Posted by Rochlow

Yes, it is.

That's killer looking!

10-01-2014, 06:23 PM	#602
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: Project Roxy http://www.classicperform.com/Store/...Cars/BHKS7.htm These are the lines I was thinking about. __________________ ///Relaxed Atmosphere

10-02-2014, 11:41 AM	#604
original-71 ///Relaxed Atmosphere Join Date: May 2010 Location: Houston,Tx Posts: 1,266	Re: Project Roxy did the tailgate handle come with the truck ? been trying to locate a stainless one. __________________ 71-Cheyenne Super (E.C.E Static Drop 4.5/7". Intro Rally's 20X8.5 5" B.S 255/35/20 (F) 20X10 5.25 B.S 275/35/20 (R) 87-Silverado Static Drop 5/7" Raceline Explosion 5 22X8.5 (F) 22X10 (R) hector _________________________________ 1971 Chevrolet Cheyenne Super 1987 Chevrolet Silverado 2006 Ford Mustang GT 2012 Toyota 4-Runner 2014 Dodge Ram 1500 Sport Crew Cab

10-05-2014, 05:28 PM	#608
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: Project Roxy __________________ ///Relaxed Atmosphere

10-05-2014, 08:59 PM	#609
boonedogs72 Registered User Join Date: Apr 2005 Location: redding ca Posts: 1,438	Re: Project Roxy Nice touch. I dig it

10-05-2014, 09:22 PM	#610
sduckworth13 Registered User Join Date: Mar 2011 Location: Kansas City, Missouri Posts: 3,541	Re: Project Roxy Glove box door looks great Jeff __________________ Scott

10-23-2014, 03:10 PM	#611
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: Project Roxy Nothing to show, but I'm not a fan of bending brake and fuel lines. __________________ ///Relaxed Atmosphere

11-08-2014, 06:22 PM	#613
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: Project Roxy Glad you got it figured out! I know I made a few purchases from Speedway Motors before I got all my brake lines done. They have a very good selection of braided brake line fittings and hose. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

11-20-2014, 08:41 PM	#614
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: Project Roxy I'm looking at the exhaust and was thinking of use Black Widow mufflers. Has anyone had any experience with them __________________ ///Relaxed Atmosphere

11-20-2014, 09:29 PM	#616
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: Project Roxy I was thinking these or hushpowers __________________ ///Relaxed Atmosphere

11-21-2014, 10:12 AM	#617
knomadd Registered User Join Date: Jul 2012 Location: Rosenberg, Texas Posts: 3,506	Re: Project Roxy Hushpowers are pretty quiet, compared to a Flowmaster, Magna Flow or Borla type sound. I had a set on my GTO, but I really wanted Flowmasters.... was really disappointed. If you want quieter than a Flowmaster, the Hushpowers still have a pretty cool tone, just not nearly as noticeable. Unfortunately, no experience with Black Widow, or Gibson for that matter. __________________ -Duane C/10 Club Texas member 1971 Chevy C10 "Brutus" SWB Fleetside 2016 6.0L (L96) 6L90E (driver/project) 1965 Pontiac GTO "Royal Goat" 400/TH400 w/AC (my baby)

12-15-2014, 10:13 AM	#620
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: Project Roxy Well, Just working on the parking brake and found out you can have a garage door company make a custom length intermediate cable with swage fittings, instead of ordering one. __________________ ///Relaxed Atmosphere

12-22-2014, 11:15 PM	#621
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: Project Roxy Santa came early for Roxy __________________ ///Relaxed Atmosphere

12-23-2014, 02:38 PM	#622
1stchevy Registered User Join Date: Jan 2010 Location: Randleman, NC Posts: 785	Re: Project Roxy Is that a battery box?

12-23-2014, 06:12 PM	#624
68shortwide Registered User Join Date: Jul 2014 Location: Missouri Posts: 1,427	Re: Project Roxy Awesome build. Subbed. __________________ Jack 1968 swb on air



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.