AL Part out of 1967 Open Road Camper - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**too much stuff** · 10-12-2014, 07:35 PM

Quote:

Originally Posted by nlped

Seat belts aren't original...some sort of aftermarket burgundy 3 point belts.

Glove box door would be $65 shipped?

I will pass, Thanks.

**nlped** · 10-12-2014, 07:38 PM

Quote:

Originally Posted by chuckmc8

Didnt think about the pass thru hole. It cut the roof out too, right?

How about a price for the complete ac system?

Yeah, the roof is cut right middle area.

I'd probably be keeping the compressor and condensor for the truck I'd be putting the 468 in. I'd sell the underdash piece and the related harnesses, etc...

**70shortfleet** · 10-12-2014, 07:39 PM

what kind of shape and color is the dash pad in? and how much?

**nlped** · 10-12-2014, 07:41 PM

Quote:

Originally Posted by 70shortfleet

what kind of shape and color is the dash pad in? and how much?

See post #5

**nlped** · 10-12-2014, 07:49 PM

Protecto plate & original owners manual showing sale date of 5/16/1967 in Redondo Beach California...$20 shipped

Undone · 10-12-2014, 07:57 PM

Quote:

Originally Posted by nlped

The fenders are in really good shape, but as you can see from the pics, the PO did drill a couple of holes in them for aftermarket trailer style parking lights

and the passenger one will have holes in it from the upright where the awning hardware is mounted...

I'd ship, but I have no idea how much shipping would run...

They are very solid with no visible rust, even in the super common passenger front cup.

$65 each?

I am very interested pending shipping quote, possible Greyhound to Athens Ga. terminal.

**nlped** · 10-12-2014, 08:16 PM

Quote:

Originally Posted by Undone

I am very interested pending shipping quote, possible Greyhound to Athens Ga. terminal.

PM me an address and I'll check. I don't live ANYWHERE near a greyhound.

**nlped** · 10-12-2014, 08:22 PM

Quote:

Originally Posted by jabborabbo

Wipers/lights knobs/switches and heater/defroster control unit shipped to 75801?

Thanks!

SOLD!!! Thanks Jere

**michael bustamante** · 10-12-2014, 08:31 PM

Im interested in the radio if it works and has rca outputs for an amplifier.
Also what are you going to ask for the gauges and what gauges are mounted in the middle abive the radio and in the dash cluster? I see the volts one......

**nlped** · 10-12-2014, 08:34 PM

Quote:

Originally Posted by michael bustamante

Im interested in the radio if it works and has rca outputs for an amplifier.
Also what are you going to ask for the gauges and what gauges are mountes in the middle abive the radio.

I'll check the radio out tomorrow afternoon. I'll put together a price for the guages individually. The 2 in the middle are oil & trans temps.

**southern parts** · 10-12-2014, 08:44 PM

how much for the cab? I know it has a big hole in the roof and back.

**nlped** · 10-12-2014, 08:47 PM

Quote:

Originally Posted by southern parts

how much for the cab? I know it has a big hole in the roof and back.

$300, but it'd be a bit before I'd have it off.

**jmader** · 10-12-2014, 09:04 PM

How is the drivers side door handle/latch relay?

**nlped** · 10-12-2014, 09:08 PM

Quote:

Originally Posted by jmader

How is the drivers side door handle/latch relay?

Like I said...I'm keeping the complete doors. Their amazing.

Blown06 · 10-12-2014, 09:14 PM

Price on the high hump?

**nlped** · 10-12-2014, 09:16 PM

Quote:

Originally Posted by Blown06

Price on the high hump?

$75 plus shipping. It's a 4-speed one.

Blown06 · 10-12-2014, 09:18 PM

I'll take it, figure shipping to 78611 and let me know a total and PayPal address.

**nlped** · 10-12-2014, 09:24 PM

Quote:

Originally Posted by Blown06

I'll take it, figure shipping to 78611 and let me know a total and PayPal address.

PM sent

UPDATE: Sold!!

Blown06 · 10-12-2014, 09:31 PM

Quote:

Originally Posted by nlped

PM sent

Money sent, thanks again. Jarrod

**southern parts** · 10-12-2014, 09:43 PM

I`m going to pass on the cab I didn`t see the big hole in the center of the dash.

but, I`ll take the dash pad if it gets to me.

**nlped** · 10-12-2014, 09:47 PM

Quote:

Originally Posted by southern parts

I`m going to pass on the cab I didn`t see the big hole in the center of the dash.

but, I`ll take the dash pad if it gets to me.

No problem... I do have a complete cab, but it needs rockers & corners. Or I could cut the dash out of it and include it for $335?

I think the dash pad is sold, but I'll let you know tomorrow.

**michael bustamante** · 10-12-2014, 09:48 PM

Lemme know on the gauge cluster and radio. And if anythings missing. Dont kneed the guages above the radio.
Can you tell me what the other aftrmkt gauges are in the dash cluster?

**nlped** · 10-12-2014, 09:53 PM

Quote:

Originally Posted by michael bustamante

Lemme know on the gauge cluster and radio. And if anythings missing. Dont kneed the guages above the radio.
Can you tell me what the other aftrmkt gauges are in the dash cluster?

I'll let you know more on the radio... The cluster guages are Autometer comp guages...Tach, water temp, vacuum, volts, oil pressure.

flashed · 10-12-2014, 10:13 PM

How much for the wheels ,just thinking out loud ?

**nlped** · 10-12-2014, 10:23 PM

Quote:

Originally Posted by flashed

How much for the wheels ,just thinking out loud ?

They are 16" on the front & 19.5" on the rear. $450 with caps, lugs & tires.

10-12-2014, 07:39 PM	#28
70shortfleet Senior Member Join Date: Apr 2010 Location: St.Peters, MO Posts: 2,228	Re: Part out of 1967 Open Road Camper what kind of shape and color is the dash pad in? and how much?

10-12-2014, 07:49 PM	#30
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: Part out of 1967 Open Road Camper Protecto plate & original owners manual showing sale date of 5/16/1967 in Redondo Beach California...$20 shipped Attached Images __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha Last edited by nlped; 10-12-2014 at 08:10 PM.

10-12-2014, 08:31 PM	#34
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,858	Re: Part out of 1967 Open Road Camper Im interested in the radio if it works and has rca outputs for an amplifier. Also what are you going to ask for the gauges and what gauges are mounted in the middle abive the radio and in the dash cluster? I see the volts one...... __________________ 1967custom

10-12-2014, 08:44 PM	#36
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,470	Re: Part out of 1967 Open Road Camper how much for the cab? I know it has a big hole in the roof and back.

10-12-2014, 09:04 PM	#38
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: Part out of 1967 Open Road Camper How is the drivers side door handle/latch relay? __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

10-12-2014, 09:14 PM	#40
Blown06 Registered User Join Date: Oct 2012 Location: Burnet, Tx Posts: 332	Re: Part out of 1967 Open Road Camper Price on the high hump?

10-12-2014, 09:18 PM	#42
Blown06 Registered User Join Date: Oct 2012 Location: Burnet, Tx Posts: 332	Re: Part out of 1967 Open Road Camper I'll take it, figure shipping to 78611 and let me know a total and PayPal address.

10-12-2014, 09:43 PM	#45
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,470	Re: Part out of 1967 Open Road Camper I`m going to pass on the cab I didn`t see the big hole in the center of the dash. but, I`ll take the dash pad if it gets to me.

10-12-2014, 09:48 PM	#47
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,858	Re: Part out of 1967 Open Road Camper Lemme know on the gauge cluster and radio. And if anythings missing. Dont kneed the guages above the radio. Can you tell me what the other aftrmkt gauges are in the dash cluster? __________________ 1967custom

10-12-2014, 10:13 PM	#49
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,728	Re: Part out of 1967 Open Road Camper How much for the wheels ,just thinking out loud ?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.