Universal Power Window Kit - The 1947 - Present Chevrolet & GMC Truck Message Board Network

coop34 · 10-15-2014, 07:16 PM

Saw this on amazon today. Really, really cheap. Has anyone installed something like this on their truck?

http://www.amazon.com/XO-Vision-PW203-Power-Window...

**70STOVEBOLT** · 10-15-2014, 07:27 PM

Don't know about that brand, but the cable driven ones are not powerful enough to raise the window if the division bar channel is worn.

coop34 · 10-15-2014, 07:31 PM

My windows roll up and down with little effort. Would that make a difference?

**70STOVEBOLT** · 10-15-2014, 07:40 PM

Probably. You can make your own out of stock regulators. Search for "power windows on the cheap" in the box at the top of the page. Be sure to click on the 67-72 dot first.

Eddie H. · 10-16-2014, 05:21 PM

I just put a set of these Electric Life PW regulators in my sons 71 GMC. It's an easy install and they work great. http://electric-life.com/shopexd.asp?id=926

davepl · 10-16-2014, 07:11 PM

Those cable ones still drive the factory window crankshaft, so I guess they must stick out of the door somehow (since the shaft itself does). Unless they have you cut it off. I'd like to see a picture of this style installed.

hotrodder · 10-16-2014, 09:22 PM

I have used these on two streetrod builds and they work great. Real easy to install .

RManson · 10-17-2014, 12:42 AM

X2 on the Electric Life kit. Really strong motors and no faffing around with "custom" mounts, etc. Even possible to keep the stock cranks. I've had my kit installed for about a year now and the motors are still really fast. Wired in for remote fob control is cool too.

Here's the full story on the install on my '68...

http://www.customclassictrucks.com/t..._installation/

Hope this helps!

**70STOVEBOLT** · 10-18-2014, 12:02 PM

Quote:

Originally Posted by davepl

Those cable ones still drive the factory window crankshaft, so I guess they must stick out of the door somehow (since the shaft itself does). Unless they have you cut it off. I'd like to see a picture of this style installed.

Dave, there is a cover in the kit that goes over the shaft but it does not look good IMO. And you have to drill several holes in the door to mount the motor
and the part that goes over the splined regulator shaft. I had the passenger
side installed, but it would not raise the window without help. Member bonnieclyde100 made power regulators from his stock ones. He has a youtube video on it. Only cost would be the motors and wiring/switches. I did mine patterned after his and they work great.

10-15-2014, 07:16 PM	#1
coop34 Registered User Join Date: Sep 2009 Location: Visalia, CA Posts: 247	Universal Power Window Kit Saw this on amazon today. Really, really cheap. Has anyone installed something like this on their truck? http://www.amazon.com/XO-Vision-PW203-Power-Window...

10-15-2014, 07:27 PM	#2
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,352	Re: Universal Power Window Kit Don't know about that brand, but the cable driven ones are not powerful enough to raise the window if the division bar channel is worn. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

10-15-2014, 07:31 PM	#3
coop34 Registered User Join Date: Sep 2009 Location: Visalia, CA Posts: 247	Re: Universal Power Window Kit My windows roll up and down with little effort. Would that make a difference?

10-15-2014, 07:40 PM	#4
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,352	Re: Universal Power Window Kit Probably. You can make your own out of stock regulators. Search for "power windows on the cheap" in the box at the top of the page. Be sure to click on the 67-72 dot first. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

10-16-2014, 05:21 PM	#5
Eddie H. Registered User Join Date: Mar 2001 Location: Paradise TX USA Posts: 1,200	Re: Universal Power Window Kit I just put a set of these Electric Life PW regulators in my sons 71 GMC. It's an easy install and they work great. http://electric-life.com/shopexd.asp?id=926 __________________ "Negative people always seem to have a problem for every solution"

10-16-2014, 07:11 PM	#6
davepl Registered User Join Date: Aug 2006 Location: Redmond, WA Posts: 6,332	Re: Universal Power Window Kit Those cable ones still drive the factory window crankshaft, so I guess they must stick out of the door somehow (since the shaft itself does). Unless they have you cut it off. I'd like to see a picture of this style installed. __________________ 1970 GMC Sierra Grande Custom Camper - Built, not Bought 1969 Pontiac 2+2 427/390 4-speed Coupe 1969 Pontiac 2+2 427/390 4-speed Convertible

10-16-2014, 09:22 PM	#7
hotrodder Registered User Join Date: Oct 2011 Location: Bloomington Indiana Posts: 322	Re: Universal Power Window Kit I have used these on two streetrod builds and they work great. Real easy to install .

10-17-2014, 12:42 AM	#8
RManson Registered User Join Date: Jun 2011 Location: United States Posts: 158	Re: Universal Power Window Kit X2 on the Electric Life kit. Really strong motors and no faffing around with "custom" mounts, etc. Even possible to keep the stock cranks. I've had my kit installed for about a year now and the motors are still really fast. Wired in for remote fob control is cool too. Here's the full story on the install on my '68... http://www.customclassictrucks.com/t..._installation/ Hope this helps!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.