Panhard bar question

[nlped]

Hey all, I searched first but couldn't find what I needed so here we go...

I have the Porterbuilt 2 piece c-notch and all the related PB crossmembers shock relocation crossmember, PB trailing arms & crossmember etc. The only piece that I haven't pulled the trigger on is a panhard bar because I have a 12 bolt with an oversized, finned, aluminum diff cover that barely clears the CPP deluxe "bent" panhard bar but it uses the stock panhard bar mount. The PB c-notch interferes with the stock panhard bar mount, so I either have to do some modifications or see if anyone else can chime in if PB builds a "bent" bar that works with their notch too. I haven't seen one on their site, or anyone mentioning one.

Thanks...

[Mikeeal33]

I tried to help here, but I can't even find anything on PB's tracbar on their very own website. What happened there? It's a nightmare to navigate now.......

I thought both sides got relocated with their tracbar kit though giving enough room for whatever diff cover you have.

[PBFAB.COM]

Originally Posted by nlped

Hey all, I searched first but couldn't find what I needed so here we go...

I have the Porterbuilt 2 piece c-notch and all the related PB crossmembers shock relocation crossmember, PB trailing arms & crossmember etc. The only piece that I haven't pulled the trigger on is a panhard bar because I have a 12 bolt with an oversized, finned, aluminum diff cover that barely clears the CPP deluxe "bent" panhard bar but it uses the stock panhard bar mount. The PB c-notch interferes with the stock panhard bar mount, so I either have to do some modifications or see if anyone else can chime in if PB builds a "bent" bar that works with their notch too. I haven't seen one on their site, or anyone mentioning one.

Thanks...

Ed-

We don't have a "bent style" panhard bar that is in production. But have done one before. We could always look into building one for you as well.

Here's a pic of one we did a while back. Feel free to send me an email so we can further discuss: tech@pbfab.com

Nate

[PBFAB.COM]

Originally Posted by Mikeeal33

I tried to help here, but I can't even find anything on PB's tracbar on their very own website. What happened there? It's a nightmare to navigate now.......

I thought both sides got relocated with their tracbar kit though giving enough room for whatever diff cover you have.

Here's a link: http://pbfab.com/63-72-fully-adjustable-trac-bar

We are working on making a few tweaks to the site to help make it a little easier to navigate.

Nate

[Mikeeal33]

Originally Posted by PBFAB.COM

We are working on making a few tweaks to the site to help make it a little easier to navigate.

Right on right on.

[PBFAB.COM]

Originally Posted by Mikeeal33

Right on right on.

Mike-

Any feedback is welcome. We want the site to be easy for all to navigate, so if you have any suggestions please send them to Brandon@pbfab.com

Thanks!
Nate

[Mikeeal33]

That's all I've noticed, the rest looks good just hard to find stuff, and the search bar wasn't producing any results either.

Sorry for the derail Ed I'll get outta here now.

[nlped]

Originally Posted by Mikeeal33

That's all I've noticed, the rest looks good just hard to find stuff, and the search bar wasn't producing any results either.

Sorry for the derail Ed I'll get outta here now.

No worries...Mikeeal33...you see why I posted the question

Hey Nate, thanks for chiming in. I'll send an email tomorrow.

[calvin78612]

I had the same problem with the search bar, never was able to find trailing arms. You do still sell the trailing arms separate ?

[nlped]

Originally Posted by PBFAB.COM

Ed-

We don't have a "bent style" panhard bar that is in production. But have done one before. We could always look into building one for you as well.

Here's a pic of one we did a while back. Feel free to send me an email so we can further discuss: tech@pbfab.com

Nate

Email sent... Thanks Nate!!!