Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
11-07-2014, 07:24 PM | #1 |
Registered User
Join Date: Sep 2012
Location: Arlington, TN
Posts: 315
|
New to straight 6 world--help with info on engine and carb
Like the title says, I am new to the inline 6 world...this is my first one!! I have read a lot about the 230 and 250 engines but cant seem to find any numbers to help me identify which engine I have IN MY 1966 C-10 Service Truck. Where is the numbers located that will help me identify it? Also, I can see no numbers or name on the carb (I assume it is a Rochester 1 barrel). I need a rebuild kit and Auto Zone has one but I need to know what type carb this is. Also, looking for info on the small silver square part next to the carb (I assume it is some sort of heat riser during warmup, but not sure) it is not hooked up. And lastly the bracket under my carb that is not hooked up as well. Any info on these questions or anything else you can add would be appreciated. Thanks
WHAT IS THIS PART???? |
11-07-2014, 08:39 PM | #2 |
Registered User
Join Date: Nov 2013
Location: Ontario, Canada
Posts: 113
|
Re: New to straight 6 world--help with info on engine and carb
The numbers are cast directly into the block. I'm not sure if you can read them while the engine is in the truck, they are on the driver's side of the block.
Other than a Rochester 1-barrel, I'm not sure on the carb number. Also the 230 in my 65 didn't have that silver box that I can recall but it has been a while.
__________________
1965 GMC 910 Short Fleetside. 230 CI 4-speed. |
11-07-2014, 09:15 PM | #3 |
Registered User
Join Date: Sep 2009
Location: menifee california
Posts: 788
|
Re: New to straight 6 world--help with info on engine and carb
if the motor is true to the truck you can look at the side covers and tell if it is a 250 or a 292 six. the 292 has 6 inch side covers and the 250 has the 4in side covers
|
11-07-2014, 09:20 PM | #4 | |
Registered User
Join Date: Nov 2013
Location: Ontario, Canada
Posts: 113
|
Re: New to straight 6 world--help with info on engine and carb
Quote:
Also those side covers look like the 4-inch ones.
__________________
1965 GMC 910 Short Fleetside. 230 CI 4-speed. |
|
11-08-2014, 01:08 AM | #5 |
Registered User
Join Date: Oct 2012
Location: Philly, PA
Posts: 540
|
Re: New to straight 6 world--help with info on engine and carb
Theres a pad next to the distributor with a number stamped into it and another number casted into the block further back.
__________________
My truck ain't dead, it just smells funny. |
11-08-2014, 01:29 AM | #6 |
Registered User
Join Date: Sep 2012
Location: Oregon
Posts: 3,303
|
Re: New to straight 6 world--help with info on engine and carb
Looks like a 250 to me.
Pull the carb and take it in to match the kit.
__________________
GOD BLESS AMERICA! |
11-08-2014, 03:24 AM | #7 |
Registered User
Join Date: Mar 2010
Location: Camperdown Vic Australia
Posts: 230
|
Re: New to straight 6 world--help with info on engine and carb
I'm no expert on these chev 6's since I'm an Aussie but I'd say it's a 250 out of something later than 1966. Looks like it has an egr valve which would make think 1970s. nb// egr valve is exhaust gas recirculation an anti pollution system
|
Bookmarks |
|
|