GMC 702 twin six water pump removal - The 1947 - Present Chevrolet & GMC Truck Message Board Network

atomman · 11-09-2014, 09:09 AM

OK folks, new to this forum. So here we go. Just picked up a GMC V-12, all is going well in the destruction mode, I mean tear down. However, I can't get the bottom pulley to move for removal of the water pump. I have tried every method of puller I have, but it won't budge. Am I missing something???!!!

Thanks
atomman
just a northern country boy on the back roads of SC.
dlmarx at bellsouth dot net

**LockDoc** · 11-09-2014, 09:53 AM

Welcome to the board!

I can't help you with the problem but for those of you reading this thread that don't have a clue what he is talking about here is a video of one.....

GMC 702 V12 Engine - YouTube

I would think there would be a section in the service manuals about them. The pulleys should come off the same as the V6.

LockDoc

PanelDeland · 11-09-2014, 11:22 AM

PM member "coyoterun". He has a lot of expertise on these engines and can probably give you an answer. He has had several and as far as I know is probably the most knowledgeable member on them.

atomman · 11-09-2014, 12:20 PM

"coyoterun" run does not show up as a member. Do you have another handle for him. I checked the member list.
Thanks

**LockDoc** · 11-09-2014, 02:44 PM

Quote:

Originally Posted by atomman

"coyoterun" run does not show up as a member. Do you have another handle for him. I checked the member list.
Thanks

http://67-72chevytrucks.com/vboard/member.php?u=27741

Click on "Send Message" just below the picture....

LockDoc

11-09-2014, 09:09 AM	#1
atomman Registered User Join Date: Nov 2014 Location: rembert, sc Posts: 2	GMC 702 twin six water pump removal OK folks, new to this forum. So here we go. Just picked up a GMC V-12, all is going well in the destruction mode, I mean tear down. However, I can't get the bottom pulley to move for removal of the water pump. I have tried every method of puller I have, but it won't budge. Am I missing something???!!! Thanks atomman just a northern country boy on the back roads of SC. dlmarx at bellsouth dot net

11-09-2014, 11:22 AM	#3
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,992	Re: GMC 702 twin six water pump removal PM member "coyoterun". He has a lot of expertise on these engines and can probably give you an answer. He has had several and as far as I know is probably the most knowledgeable member on them. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

11-09-2014, 12:20 PM	#4
atomman Registered User Join Date: Nov 2014 Location: rembert, sc Posts: 2	Re: GMC 702 twin six water pump removal "coyoterun" run does not show up as a member. Do you have another handle for him. I checked the member list. Thanks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.